Patt, Don't open Page Setup first. Select print first. Select the printer you wish to use. Select Properties. On the paper tab, select the paper tab. On the Paper Options tab and on the Advanced Tab of the Paper Options tab, select what you want. Close everything and run a print as a test. Does this work? Ed On 8/20/2015 4:35 PM, Patt Ricketts wrote: > Ed, > > In VCF I open page setup. The paper sizes are 8X13, A4, A5, A6, B5, > envolopes, letter, legal, etc. All these are sizes for my HP laser > printer. For some reason VCF is not recognizing my Epson as the > default printer. I even rebooted to see if that worked. > > Patt > > On Thu, Aug 20, 2015 at 1:14 PM, Edward A Feustel <efeustel@hughes.net > <mailto:efeustel@hughes.net>> wrote: > > > > On 8/20/2015 3:53 PM, Patt Ricketts via wrote: > > Hi, > > I can't seem to get VCF to accept my roll printer. In the past > I had to > make the printer my default printer and then VCF would accept > the different > printing sizes. But now the page setup just accepts regular > paper. Does > anyone know how to get it to accept the roll paper? > > The chart is 13X38 and I have 13" roll paper. I tried > exporting to jpg to > print that way but when it exports it resizeds to 17.333 X 49.333 > resolution 72. If I scale it down I loose some of the lines. > > Patt > > So you use "setup printer" to select the roll printer and then > after doing this much are not offered paper choices? Is the "roll > printer" a legitimate device? If so, I'd uninstall that device, > download and install the manufacturer's device drivers (not the > Microsoft generic ones) and then try again. > Ed > > > > > -- > Patt Ricketts > www.jackandpatt.com <http://www.jackandpatt.com>