David Walker's presentation is available at http://ottawa-tmg-ug.ca/Docs/Suggested%20Image%20Sizes%20TMG%20&%20SS%20-%20 a%20Revisit.pdf If that does not work, it's the second one listed on http://ottawa-tmg-ug.ca/articles_&_presentations_archives_2014.htm Mike More mikemore@rogers.com -----Original Message----- From: TMG [mailto:tmg-bounces+mikemore=rogers.com@rootsweb.com] On Behalf Of Ann Shepherd Sent: Friday, September 23, 2016 9:11 AM To: TMG@rootsweb.com Subject: [TMG] How do others resize TMG document exhibits for Second Site? I'm working through all of the exhibits I need to resize for TMG and would appreciate some ideas/advice on what to do with some documents. My aim is to have exhibits in SS appear using the clickable lightbox to enlarge them. I'm fine now I think with resizing photos to work this way (often constrained by what I've been sent by family to start with). My problem is in working out how to resize documents such as census records, certificates and so on. (A US census page is one example). If I make them say 850 pixels high they're pretty much impossible to read. So I figure they have to be displayed as scrollable documents in Second Site but am not sure how to resize them to best achieve this. I'd be grateful for tips on what others do with these exhibits in Second Site. Regards Ann The TMG archive is found here: http://archiver.rootsweb.ancestry.com/th/index/TMG/ Instructions on how to subscribe to TMG: http://lists.rootsweb.ancestry.com/index/other/Software/TMG.html ------------------------------- To unsubscribe from the list, please send an email to TMG-request@rootsweb.com with the word 'unsubscribe' without the quotes in the subject and the body of the message

Ann, I use TMG Utilities to Export my TMG images with Width and Height both set at 1000. This was something that John Cardinal suggested to me to help save space (I have thousands of images). My TMGU settings are: Exhibits > Export Images: - check "Resize Image", - type "1000" in both the Width and Height boxes, - then check "Reduce Dimensions Only" If you go to one of my web pages created with Second Site at http://www.acvancestors.com/g2/p2137.htm#i64087 and click on any of the camera icons on the page you can judge the readability of a variety of types of images: scans of book pages, scans of original documents, census images, etc. Greg On Fri, Sep 23, 2016 at 9:10 AM, Ann Shepherd <annmcarson@gmail.com> wrote: > I'm working through all of the exhibits I need to resize for TMG and would > appreciate some ideas/advice on what to do with some documents. My aim is > to > have exhibits in SS appear using the clickable lightbox to enlarge them. > I'm > fine now I think with resizing photos to work this way (often constrained > by > what I've been sent by family to start with). > > > > My problem is in working out how to resize documents such as census > records, > certificates and so on. (A US census page is one example). If I make them > say 850 pixels high they're pretty much impossible to read. So I figure > they > have to be displayed as scrollable documents in Second Site but am not sure > how to resize them to best achieve this. > > > > I'd be grateful for tips on what others do with these exhibits in Second > Site. > > > > Regards > > > > Ann > > > > The TMG archive is found here: http://archiver.rootsweb. > ancestry.com/th/index/TMG/ > Instructions on how to subscribe to TMG: http://lists.rootsweb. > ancestry.com/index/other/Software/TMG.html > ------------------------------- > To unsubscribe from the list, please send an email to > TMG-request@rootsweb.com with the word 'unsubscribe' without the quotes > in the subject and the body of the message >

For my site, I save documents as PDFs so they are downloadable and printable, not as images. I let the user and Adobe worry about sizing. Constance

It's not difficult. Just go to the start menu and scroll down the App list (programs) til you find it and uninstall it. Then restart and Defender will activate. At least I think those are the steps I took---similar anyway. Kaye Sent from my iPhone > On Sep 20, 2016, at 10:15 PM, Ann Shepherd <annmcarson@gmail.com> wrote: > > Thank you Paul, Kaye, Greg, Chris for your advice re anti-virus. It's great > to know that Windows Defender is compatible with TMG. I'm currently using > Kaspersky and it's OK but have read of problems with compatibility. > > Now just have to get McAfee off my new computer when it arrives. :-) > > Ann > > -----Original Message----- > From: TMG [mailto:tmg-bounces+annmcarson=gmail.com@rootsweb.com] On Behalf > Of Paul Taylor > Sent: Monday, 19 September 2016 3:55 AM > To: The Master Genealogist Rootsweb Email List > Subject: Re: [TMG] Best antivirus, etc software to use with TMG and Second > Site? > > Hi Ann > After using AVG for ages and getting bad reports I moved to Kaspersky a > couple of years ago and find that it does not slow my computer down or > cause any problems for me Regards Paul > >> On 18/09/2016 2:26 AM, Ann Shepherd wrote: >> Hi all > ssage > > The TMG archive is found here: http://archiver.rootsweb.ancestry.com/th/index/TMG/ > Instructions on how to subscribe to TMG: http://lists.rootsweb.ancestry.com/index/other/Software/TMG.html > ------------------------------- > To unsubscribe from the list, please send an email to TMG-request@rootsweb.com with the word 'unsubscribe' without the quotes in the subject and the body of the message

Thank you Paul, Kaye, Greg, Chris for your advice re anti-virus. It's great to know that Windows Defender is compatible with TMG. I'm currently using Kaspersky and it's OK but have read of problems with compatibility. Now just have to get McAfee off my new computer when it arrives. :-) Ann -----Original Message----- From: TMG [mailto:tmg-bounces+annmcarson=gmail.com@rootsweb.com] On Behalf Of Paul Taylor Sent: Monday, 19 September 2016 3:55 AM To: The Master Genealogist Rootsweb Email List Subject: Re: [TMG] Best antivirus, etc software to use with TMG and Second Site? Hi Ann After using AVG for ages and getting bad reports I moved to Kaspersky a couple of years ago and find that it does not slow my computer down or cause any problems for me Regards Paul On 18/09/2016 2:26 AM, Ann Shepherd wrote: > Hi all ssage

Hi Lindsay After we met last month I did go to the Motel at Ginninderra/Federation Village - they never did get back to me but I wouldn’t worry about that as I thought it just barely suitable. There is a new lodge open just near there with conference facilities www.leumeahlodge <http://www.leumeahlodge.com.au/>.com.au/ <http://www.leumeahlodge.com.au/> - But I’m guessing the Dickson location would be more suitable. We would need to act soon to get a booking in place. Do you think there is real interest from the Sydney Group? Recent group messages didn’t seem to suggest many people were turning up even to their Sydney meeting last month. Another option would be for Canberra to arrange the workshop at the proven venue at Campbelltown. I would like to purchase another copy of Penny’s book. I enjoyed it immensely, particularly knowing you and Dennis and also to my surprise - Cheryl Emerson - who sat outside my office for a couple of years in the late 80s. I would like to send a copy to a 2nd cousin of mine in Perth who had felt a bit ostracised from the rest of us just because of the family’s reaction two generations ago when her widowed grandfather married his mother-in-law. The families didn’t have much contact after that. My generation knew nothing of this but she is very much a part of us now. If Penny could inscribe it for June - that would be appreciated. I will be at the October TMG meeting. Kind regards Arthur

Glad that worked and I am very glad I was able to help! :)) Fred On Monday, September 19, 2016 6:48 AM, Carol Collins <carolcollins65@gmail.com> wrote: Thank you, Fred - that did it.  Duh!  Why didn't I think of that - except that I can't get down on the floor anymore so ignore it.  Thank you so much... On Sun, Sep 18, 2016 at 4:51 PM, Fred Claussen <fclausse@pacbell.net> wrote: Carol: Have you tried disconnecting/unplugging the printer from its power source? Try that, wait for a few minutes, and plug it back in, turn on your computer and see if things are back to normal. Fred Claussen     On Sunday, September 18, 2016 1:22 PM, Carol Collins <carolcollins65@gmail.com> wrote:  This is only slightly TMG related - in that I'm in the middle of printing out a book and my printer has decided to have a nervous breakdown.  I have an HP Envy 5530 - I changed the ink (both color and black).  It insists on alligning the -- whatever- - and I've always done that.  All, until today, was smooth.  Today it decided to get stuck - and it won't turn off.  There does not seem to be an on-off switch (other than the button that I push to turn it on) and it's wireless.  I turned off the computer for a couple of hours - but the printer is still blinking and waiting for - what???.  Any suggestions on how I can get it turned off would be greatly appreciated. Of coursse it's Sunday..... Thanks so much...Carol The TMG archive is found here: http://archiver.rootsweb. ancestry.com/th/index/TMG/ Instructions on how to subscribe to TMG: http://lists.rootsweb. ancestry.com/index/other/ Software/TMG.html ------------------------------ - To unsubscribe from the list, please send an email to TMG-request@rootsweb.com with the word 'unsubscribe' without the quotes in the subject and the body of the message The TMG archive is found here: http://archiver.rootsweb. ancestry.com/th/index/TMG/ Instructions on how to subscribe to TMG: http://lists.rootsweb. ancestry.com/index/other/ Software/TMG.html ------------------------------ - To unsubscribe from the list, please send an email to TMG-request@rootsweb.com with the word 'unsubscribe' without the quotes in the subject and the body of the message

I bought my new Dell laptop from the Microsoft Store. The computers MS sells only have Windows on them and not the other junk. They also provide support on top of what you would normally have to get from the manufacturer. Walter -----Original Message----- From: TMG [mailto:tmg-bounces+walterwood44=gmail.com@rootsweb.com] On Behalf Of Eric Vandegrift Sent: Monday, September 19, 2016 9:37 AM To: tmg@rootsweb.com Subject: [TMG] Anti-virus I agree with Kaye. The free built-in Windows Defender is very good. I supplement it with Malwarebytes.If you're getting a new computer consider custom made. You'll pay a little more but will have a clean machine with nothing but Windows on it.: Eric Vandegrift -------- Original message -------- From: tmg-request@rootsweb.com Date: 9/19/16 12:00 AM (GMT-08:00) To: tmg@rootsweb.com Subject: TMG Digest, Vol 11, Issue 226 Send TMG mailing list submissions to tmg@rootsweb.com To subscribe or unsubscribe via the World Wide Web, visit http://lists2.rootsweb.ancestry.com/mailman/listinfo/tmg or, via email, send a message with subject or body 'help' to tmg-request@rootsweb.com You can reach the person managing the list at tmg-owner@rootsweb.com When replying, please edit your Subject line so it is more specific than "Re: Contents of TMG digest..." The TMG archive is at: http://archiver.rootsweb.ancestry.com/th/index/TMG/ How to subscribe to TMG is at: http://lists.rootsweb.ancestry.com/index/other/Software/TMG.html Today's Topics: 1. Re: Best antivirus, etc software to use with TMG and Second Site? (Greg Vaut) 2. Re: Best antivirus, etc software to use with TMG and Second Site? (Kaye Wykoff) 3. Re: Best antivirus, etc software to use with TMG and Second Site? (Paul Taylor) 4. TMG on a MAC (Lee Hoffman/KY) 5. Re: TMG on a MAC (Carol Collins) 6. Printer problem (Carol Collins) 7. Re: Printer problem (Fred Claussen) 8. TMG (Arthur Edgar) ---------------------------------------------------------------------- Message: 1 Date: Sun, 18 Sep 2016 07:55:50 -0400 From: Greg Vaut <gregvaut@gmail.com> To: The Master Genealogist Rootsweb Email List <tmg@rootsweb.com> Subject: Re: [TMG] Best antivirus, etc software to use with TMG and Second Site? Message-ID: <CALHjKN8Jvq2qH7=WJ+nWn+AmE-sStkufKSxvy7OkyoGP8-CHGg@mail.gmail.com> Content-Type: text/plain; charset=UTF-8 I've been running McAfee on Win10 with TMG, TMGU and SS on a Lenovo computer for about 1 1/2 years and have had no problems due to McAfee software or viruses. Greg On Sat, Sep 17, 2016 at 9:26 PM, Ann Shepherd <annmcarson@gmail.com> wrote: > Hi all > > > > I've been running TMG9 in Windows 7 but my laptop is dying I think + I > can't buy any battery for it in Australia any more. So I have to buy a > new PC laptop, which I'll only use for TMG and associated things > (TMGU, SecondSite, MS Office, Access, DragonSpeaking, IrfanView, etc) > since I use a Mac for all our personal computing. (I tried Fusion on > the Mac years ago and gave up on that after endless frustrations so am > going to stick with the 2 separate > computers.) > > > > I'd like to make sure I optimise the new laptop as best I can for TMG. > Would > like to continue with Windows 7 but I can't buy it anywhere in > Australia so it looks as though I'm going to be stuck with Win10. > > > > Which is the best antivirus, etc software to use with TMG and Second Site? > And is is easy to uninstall McAfee (which it seems I'm also stuck with > to start with but as I understand it causes problems for TMG) and > install something else instead? Any tips on this would be appreciated > > > > Thanks in advance > > > > Ann > > PS Am still plodding along at snail's pace with CrashPlan as a major > 2nd backup in preparation for changeover to a new computer. > > > > > > > > > > The TMG archive is found here: http://archiver.rootsweb. > ancestry.com/th/index/TMG/ > Instructions on how to subscribe to TMG: http://lists.rootsweb. > ancestry.com/index/other/Software/TMG.html > ------------------------------- > To unsubscribe from the list, please send an email to > TMG-request@rootsweb.com with the word 'unsubscribe' without the > quotes in the subject and the body of the message > ------------------------------ Message: 2 Date: Sun, 18 Sep 2016 07:12:17 -0500 From: Kaye Wykoff <ekwykoff@gmail.com> To: The Master Genealogist Rootsweb Email List <tmg@rootsweb.com> Subject: Re: [TMG] Best antivirus, etc software to use with TMG and Second Site? Message-ID: <F99C407F-1C5C-49AA-BA9F-E62EA58CAA5D@gmail.com> Content-Type: text/plain; charset=us-ascii You don't need to buy a 3rd party AV with Win 10. Windows Defender is built in to Win10. You just have to uninstall the trial of Mcafee or whatever they are trying to get you to buy and activated Defender. It is an excellent AV program. Because of processor manufacturer's contracts with the 3rd party AV developers they HAVE to load on those trial versions. BUT you do not need them. Just use MS Defender. Before Win10 we used MS Security Essentials (now called Defender) since it became available around 2009, and it was excellent. Kaye Sent from my iPhone > On Sep 17, 2016, at 8:26 PM, Ann Shepherd <annmcarson@gmail.com> wrote: > > Hi all > > > > I've been running TMG9 in Windows 7 but my laptop is dying I think + I > can't buy any battery for it in Australia any more. So I have to buy a > new PC laptop, which I'll only use for TMG and associated things > (TMGU, SecondSite, MS Office, Access, DragonSpeaking, IrfanView, etc) > since I use a Mac for all our personal computing. (I tried Fusion on > the Mac years ago and gave up on that after endless frustrations so am > going to stick with the 2 separate > computers.) > > > > I'd like to make sure I optimise the new laptop as best I can for TMG. > Would like to continue with Windows 7 but I can't buy it anywhere in > Australia so it looks as though I'm going to be stuck with Win10. > > > > Which is the best antivirus, etc software to use with TMG and Second Site? > And is is easy to uninstall McAfee (which it seems I'm also stuck with > to start with but as I understand it causes problems for TMG) and > install something else instead? Any tips on this would be appreciated > > > > Thanks in advance > > > > Ann > > PS Am still plodding along at snail's pace with CrashPlan as a major > 2nd backup in preparation for changeover to a new computer. > > > > > > > > > > The TMG archive is found here: > http://archiver.rootsweb.ancestry.com/th/index/TMG/ > Instructions on how to subscribe to TMG: > http://lists.rootsweb.ancestry.com/index/other/Software/TMG.html > ------------------------------- > To unsubscribe from the list, please send an email to > TMG-request@rootsweb.com with the word 'unsubscribe' without the > quotes in the subject and the body of the message ------------------------------ Message: 3 Date: Sun, 18 Sep 2016 18:55:19 +0100 From: Paul Taylor <pmtay@sky.com> To: The Master Genealogist Rootsweb Email List <tmg@rootsweb.com> Subject: Re: [TMG] Best antivirus, etc software to use with TMG and Second Site? Message-ID: <59b553eb-fe17-a860-2ece-29a812505f03@sky.com> Content-Type: text/plain; charset=windows-1252; format=flowed Hi Ann After using AVG for ages and getting bad reports I moved to Kaspersky a couple of years ago and find that it does not slow my computer down or cause any problems for me Regards Paul On 18/09/2016 2:26 AM, Ann Shepherd wrote: > Hi all > > > > I've been running TMG9 in Windows 7 but my laptop is dying I think + I > can't buy any battery for it in Australia any more. So I have to buy a > new PC laptop, which I'll only use for TMG and associated things > (TMGU, SecondSite, MS Office, Access, DragonSpeaking, IrfanView, etc) > since I use a Mac for all our personal computing. (I tried Fusion on > the Mac years ago and gave up on that after endless frustrations so am > going to stick with the 2 separate > computers.) > > > > I'd like to make sure I optimise the new laptop as best I can for TMG. > Would like to continue with Windows 7 but I can't buy it anywhere in > Australia so it looks as though I'm going to be stuck with Win10. > > > > Which is the best antivirus, etc software to use with TMG and Second Site? > And is is easy to uninstall McAfee (which it seems I'm also stuck with > to start with but as I understand it causes problems for TMG) and > install something else instead? Any tips on this would be appreciated > > > > Thanks in advance > > > > Ann > > PS Am still plodding along at snail's pace with CrashPlan as a major > 2nd backup in preparation for changeover to a new computer. > > > > > > > > > > The TMG archive is found here: > http://archiver.rootsweb.ancestry.com/th/index/TMG/ > Instructions on how to subscribe to TMG: > http://lists.rootsweb.ancestry.com/index/other/Software/TMG.html > ------------------------------- > To unsubscribe from the list, please send an email to > TMG-request@rootsweb.com with the word 'unsubscribe' without the > quotes in the subject and the body of the message > ------------------------------ Message: 4 Date: Sun, 18 Sep 2016 13:11:29 -0400 From: Lee Hoffman/KY <azchief@bellsouth.net> To: TMG List <tmg-l@rootsweb.com> Subject: [TMG] TMG on a MAC Message-ID: <586381.99054.bm@smtp120.sbc.mail.ne1.yahoo.com> Content-Type: text/plain; charset="us-ascii"; format=flowed I have a friend who has been running TMG on his company (Windows) laptop for a number of years. His company just gave him a MAC. What is the best way for him to proceed -- Parallels, Crossover, BootCamp, or what? Also, are there any configuration issues on how to best install these? Lee ------------------------------ Message: 5 Date: Sun, 18 Sep 2016 15:51:22 -0400 From: Carol Collins <carolcollins65@gmail.com> To: The Master Genealogist Rootsweb Email List <tmg@rootsweb.com> Subject: Re: [TMG] TMG on a MAC Message-ID: <CAG=r3VbyAFup4h+rSoCrGtGh60MDxN51PQHqSLb9zj4HtwaVgA@mail.gmail.com> Content-Type: text/plain; charset=UTF-8 I have been using Parallels since it first came out - and it works seamlessly and efficiently. I'd highly recommend it. I simply installed it, using Parallels' instructions, made sure the tools were installed (usually automatic) and simply begin using it as a PC. Install TMG 9.5 - no problem. It can also be used in coherence mode - meaning both sides are usable at once. Carol On Sun, Sep 18, 2016 at 1:11 PM, Lee Hoffman/KY <azchief@bellsouth.net> wrote: > I have a friend who has been running TMG on his company (Windows) > laptop for a number of years. His company just gave him a MAC. What > is the best way for him to proceed -- Parallels, Crossover, BootCamp, or what? > > Also, are there any configuration issues on how to best install these? > > Lee > > The TMG archive is found here: http://archiver.rootsweb.ances > try.com/th/index/TMG/ Instructions on how to subscribe to TMG: > http://lists.rootsweb.ancestry .com/index/other/Software/TMG.html > ------------------------------- > To unsubscribe from the list, please send an email to > TMG-request@rootsweb.com with the word 'unsubscribe' without the > quotes in the subject and the body of the message > ------------------------------ Message: 6 Date: Sun, 18 Sep 2016 16:21:32 -0400 From: Carol Collins <carolcollins65@gmail.com> To: List TMG <TMG@rootsweb.com> Subject: [TMG] Printer problem Message-ID: <CAG=r3VZDTJseyJ2JD0G=ttPfhZk_5root0RzPAd7GuODbwp89A@mail.gmail.com> Content-Type: text/plain; charset=UTF-8 This is only slightly TMG related - in that I'm in the middle of printing out a book and my printer has decided to have a nervous breakdown. I have an HP Envy 5530 - I changed the ink (both color and black). It insists on alligning the -- whatever- - and I've always done that. All, until today, was smooth. Today it decided to get stuck - and it won't turn off. There does not seem to be an on-off switch (other than the button that I push to turn it on) and it's wireless. I turned off the computer for a couple of hours - but the printer is still blinking and waiting for - what???. Any suggestions on how I can get it turned off would be greatly appreciated. Of coursse it's Sunday..... Thanks so much...Carol ------------------------------ Message: 7 Date: Sun, 18 Sep 2016 20:51:20 +0000 (UTC) From: Fred Claussen <fclausse@pacbell.net> To: The Master Genealogist Rootsweb Email List <tmg@rootsweb.com> Subject: Re: [TMG] Printer problem Message-ID: <1127671562.541245.1474231880671@mail.yahoo.com> Content-Type: text/plain; charset=UTF-8 Carol: Have you tried disconnecting/unplugging the printer from its power source? Try that, wait for a few minutes, and plug it back in, turn on your computer and see if things are back to normal. Fred Claussen On Sunday, September 18, 2016 1:22 PM, Carol Collins <carolcollins65@gmail.com> wrote: This is only slightly TMG related - in that I'm in the middle of printing out a book and my printer has decided to have a nervous breakdown.? I have an HP Envy 5530 - I changed the ink (both color and black).? It insists on alligning the -- whatever- - and I've always done that.? All, until today, was smooth.? Today it decided to get stuck - and it won't turn off.? There does not seem to be an on-off switch (other than the button that I push to turn it on) and it's wireless.? I turned off the computer for a couple of hours - but the printer is still blinking and waiting for - what???.? Any suggestions on how I can get it turned off would be greatly appreciated. Of coursse it's Sunday..... Thanks so much...Carol The TMG archive is found here: http://archiver.rootsweb.ancestry.com/th/index/TMG/ Instructions on how to subscribe to TMG: http://lists.rootsweb.ancestry.com/index/other/Software/TMG.html ------------------------------- To unsubscribe from the list, please send an email to TMG-request@rootsweb.com with the word 'unsubscribe' without the quotes in the subject and the body of the message ------------------------------ Message: 8 Date: Mon, 19 Sep 2016 16:56:23 +1000 From: Arthur Edgar <aedgar3@gmail.com> To: Lindsay Graham <tmg@rootsweb.com> Subject: [TMG] TMG Message-ID: <9C9E12DB-C690-466A-878D-90102CE4E062@gmail.com> Content-Type: text/plain; charset=utf-8 Hi Lindsay After we met last month I did go to the Motel at Ginninderra/Federation Village - they never did get back to me but I wouldn?t worry about that as I thought it just barely suitable. There is a new lodge open just near there with conference facilities www.leumeahlodge <http://www.leumeahlodge.com.au/>.com.au/ <http://www.leumeahlodge.com.au/> - But I?m guessing the Dickson location would be more suitable. We would need to act soon to get a booking in place. Do you think there is real interest from the Sydney Group? Recent group messages didn?t seem to suggest many people were turning up even to their Sydney meeting last month. Another option would be for Canberra to arrange the workshop at the proven venue at Campbelltown. I would like to purchase another copy of Penny?s book. I enjoyed it immensely, particularly knowing you and Dennis and also to my surprise - Cheryl Emerson - who sat outside my office for a couple of years in the late 80s. I would like to send a copy to a 2nd cousin of mine in Perth who had felt a bit ostracised from the rest of us just because of the family?s reaction two generations ago when her widowed grandfather married his mother-in-law. The families didn?t have much contact after that. My generation knew nothing of this but she is very much a part of us now. If Penny could inscribe it for June - that would be appreciated. I will be at the October TMG meeting. Kind regards Arthur ------------------------------ Subject: Digest Footer To contact the TMG list administrator, send an email to TMG-admin@rootsweb.com. To post a message to the TMG mailing list, send an email to TMG@rootsweb.com. __________________________________________________________ To unsubscribe from the list, please send an email to TMG-request@rootsweb.com with the word "unsubscribe" without the quotes in the subject and the body of the email with no additional text. ------------------------------ End of TMG Digest, Vol 11, Issue 226 ************************************ The TMG archive is found here: http://archiver.rootsweb.ancestry.com/th/index/TMG/ Instructions on how to subscribe to TMG: http://lists.rootsweb.ancestry.com/index/other/Software/TMG.html ------------------------------- To unsubscribe from the list, please send an email to TMG-request@rootsweb.com with the word 'unsubscribe' without the quotes in the subject and the body of the message

Thank you, Fred - that did it. Duh! Why didn't I think of that - except that I can't get down on the floor anymore so ignore it. Thank you so much... On Sun, Sep 18, 2016 at 4:51 PM, Fred Claussen <fclausse@pacbell.net> wrote: > Carol: > Have you tried disconnecting/unplugging the printer from its power source? > Try that, wait for a few minutes, and plug it back in, turn on your > computer and see if things are back to normal. > > Fred Claussen > > On Sunday, September 18, 2016 1:22 PM, Carol Collins < > carolcollins65@gmail.com> wrote: > > > This is only slightly TMG related - in that I'm in the middle of printing > out a book and my printer has decided to have a nervous breakdown. I have > an HP Envy 5530 - I changed the ink (both color and black). It insists on > alligning the -- whatever- - and I've always done that. All, until today, > was smooth. Today it decided to get stuck - and it won't turn off. There > does not seem to be an on-off switch (other than the button that I push to > turn it on) and it's wireless. I turned off the computer for a couple of > hours - but the printer is still blinking and waiting for - what???. Any > suggestions on how I can get it turned off would be greatly appreciated. > Of coursse it's Sunday..... > > Thanks so much...Carol > The TMG archive is found here: http://archiver.rootsweb. > ancestry.com/th/index/TMG/ > Instructions on how to subscribe to TMG: http://lists.rootsweb. > ancestry.com/index/other/Software/TMG.html > ------------------------------- > To unsubscribe from the list, please send an email to > TMG-request@rootsweb.com with the word 'unsubscribe' without the quotes > in the subject and the body of the message > > > > The TMG archive is found here: http://archiver.rootsweb. > ancestry.com/th/index/TMG/ > Instructions on how to subscribe to TMG: http://lists.rootsweb. > ancestry.com/index/other/Software/TMG.html > ------------------------------- > To unsubscribe from the list, please send an email to > TMG-request@rootsweb.com with the word 'unsubscribe' without the quotes > in the subject and the body of the message

Hi Lee, Just wanted to add that Parallels comes with wonderful tech phone support. Whenever I have had to call, they have easily helped me with problems that came up. I too recommend it very highly! Regards, Helen May > Date: Sun, 18 Sep 2016 13:11:29 -0400 > From: Lee Hoffman/KY <azchief@bellsouth.net> > > > I have a friend who has been running TMG on his company (Windows) > laptop for a number of years. His company just gave him a MAC. What > is the best way for him to proceed -- Parallels, Crossover, BootCamp, > or what? > > Also, are there any configuration issues on how to > Date: Sun, 18 Sep 2016 15:51:22 -0400 > From: Carol Collins <carolcollins65@gmail.com> > > > I have been using Parallels since it first came out - and it works > seamlessly and efficiently. I'd highly recommend it. I simply installed > it, using Parallels' instructions, made sure the tools were installed > (usually automatic) and simply begin using it as a PC. Install TMG 9.5 - > no problem. It can also be used in coherence mode - meaning both sides are > usable at once. > > Carol > > *

I agree with Kaye. The free built-in Windows Defender is very good. I supplement it with Malwarebytes.If you're getting a new computer consider custom made. You'll pay a little more but will have a clean machine with nothing but Windows on it.: Eric Vandegrift -------- Original message -------- From: tmg-request@rootsweb.com Date: 9/19/16 12:00 AM (GMT-08:00) To: tmg@rootsweb.com Subject: TMG Digest, Vol 11, Issue 226 Send TMG mailing list submissions to tmg@rootsweb.com To subscribe or unsubscribe via the World Wide Web, visit http://lists2.rootsweb.ancestry.com/mailman/listinfo/tmg or, via email, send a message with subject or body 'help' to tmg-request@rootsweb.com You can reach the person managing the list at tmg-owner@rootsweb.com When replying, please edit your Subject line so it is more specific than "Re: Contents of TMG digest..." The TMG archive is at: http://archiver.rootsweb.ancestry.com/th/index/TMG/ How to subscribe to TMG is at: http://lists.rootsweb.ancestry.com/index/other/Software/TMG.html Today's Topics:    1. Re: Best antivirus, etc software to use with TMG and Second       Site? (Greg Vaut)    2. Re: Best antivirus, etc software to use with TMG and Second       Site? (Kaye Wykoff)    3. Re: Best antivirus, etc software to use with TMG and Second       Site? (Paul Taylor)    4. TMG on a MAC (Lee Hoffman/KY)    5. Re: TMG on a MAC (Carol Collins)    6. Printer problem (Carol Collins)    7. Re: Printer problem (Fred Claussen)    8. TMG (Arthur Edgar) ---------------------------------------------------------------------- Message: 1 Date: Sun, 18 Sep 2016 07:55:50 -0400 From: Greg Vaut <gregvaut@gmail.com> To: The Master Genealogist Rootsweb Email List <tmg@rootsweb.com> Subject: Re: [TMG] Best antivirus, etc software to use with TMG and Second Site? Message-ID: <CALHjKN8Jvq2qH7=WJ+nWn+AmE-sStkufKSxvy7OkyoGP8-CHGg@mail.gmail.com> Content-Type: text/plain; charset=UTF-8 I've been running McAfee on Win10 with TMG, TMGU and SS on a Lenovo computer for about 1 1/2 years and have had no problems due to McAfee software or viruses. Greg On Sat, Sep 17, 2016 at 9:26 PM, Ann Shepherd <annmcarson@gmail.com> wrote: > Hi all > > > > I've been running TMG9 in Windows 7 but my laptop is dying I think + I > can't > buy any battery for it in Australia any more. So I have to buy a new PC > laptop, which I'll only use for TMG and associated things (TMGU, > SecondSite, > MS Office, Access, DragonSpeaking, IrfanView, etc) since I use a Mac for > all > our personal computing. (I tried Fusion on the Mac years ago and gave up on > that after endless frustrations so am going to stick with the 2 separate > computers.) > > > > I'd like to make sure I optimise the new laptop as best I can for TMG. > Would > like to continue with Windows 7 but I can't buy it anywhere in Australia so > it looks as though I'm going to be stuck with Win10. > > > > Which is the best antivirus, etc software to use with TMG and Second Site? > And is is easy to uninstall McAfee (which it seems I'm also stuck with to > start with but as I understand it causes problems for TMG) and install > something else instead? Any tips on this would be appreciated > > > > Thanks in advance > > > > Ann > > PS Am still plodding along at snail's pace with CrashPlan as a major 2nd > backup in preparation for changeover to a new computer. > > > > > > > > > > The TMG archive is found here: http://archiver.rootsweb. > ancestry.com/th/index/TMG/ > Instructions on how to subscribe to TMG: http://lists.rootsweb. > ancestry.com/index/other/Software/TMG.html > ------------------------------- > To unsubscribe from the list, please send an email to > TMG-request@rootsweb.com with the word 'unsubscribe' without the quotes > in the subject and the body of the message > ------------------------------ Message: 2 Date: Sun, 18 Sep 2016 07:12:17 -0500 From: Kaye Wykoff <ekwykoff@gmail.com> To: The Master Genealogist Rootsweb Email List <tmg@rootsweb.com> Subject: Re: [TMG] Best antivirus, etc software to use with TMG and Second Site? Message-ID: <F99C407F-1C5C-49AA-BA9F-E62EA58CAA5D@gmail.com> Content-Type: text/plain; charset=us-ascii You don't need to buy a 3rd party AV with Win 10.  Windows Defender is built in to Win10. You just have to uninstall the trial of Mcafee or whatever they are trying to get you to buy and activated Defender. It is an excellent AV program. Because of processor manufacturer's contracts with the 3rd party AV developers they HAVE to load on those trial versions. BUT you do not need them. Just use MS Defender. Before Win10 we used MS Security Essentials (now called Defender) since it became available around 2009, and it was excellent. Kaye Sent from my iPhone > On Sep 17, 2016, at 8:26 PM, Ann Shepherd <annmcarson@gmail.com> wrote: > > Hi all > > > > I've been running TMG9 in Windows 7 but my laptop is dying I think + I can't > buy any battery for it in Australia any more. So I have to buy a new PC > laptop, which I'll only use for TMG and associated things (TMGU, SecondSite, > MS Office, Access, DragonSpeaking, IrfanView, etc) since I use a Mac for all > our personal computing. (I tried Fusion on the Mac years ago and gave up on > that after endless frustrations so am going to stick with the 2 separate > computers.) > > > > I'd like to make sure I optimise the new laptop as best I can for TMG. Would > like to continue with Windows 7 but I can't buy it anywhere in Australia so > it looks as though I'm going to be stuck with Win10. > > > > Which is the best antivirus, etc software to use with TMG and Second Site? > And is is easy to uninstall McAfee (which it seems I'm also stuck with to > start with but as I understand it causes problems for TMG) and install > something else instead? Any tips on this would be appreciated > > > > Thanks in advance > > > > Ann > > PS Am still plodding along at snail's pace with CrashPlan as a major 2nd > backup in preparation for changeover to a new computer. > > > > > > > > > > The TMG archive is found here: http://archiver.rootsweb.ancestry.com/th/index/TMG/ > Instructions on how to subscribe to TMG: http://lists.rootsweb.ancestry.com/index/other/Software/TMG.html > ------------------------------- > To unsubscribe from the list, please send an email to TMG-request@rootsweb.com with the word 'unsubscribe' without the quotes in the subject and the body of the message ------------------------------ Message: 3 Date: Sun, 18 Sep 2016 18:55:19 +0100 From: Paul Taylor <pmtay@sky.com> To: The Master Genealogist Rootsweb Email List <tmg@rootsweb.com> Subject: Re: [TMG] Best antivirus, etc software to use with TMG and Second Site? Message-ID: <59b553eb-fe17-a860-2ece-29a812505f03@sky.com> Content-Type: text/plain; charset=windows-1252; format=flowed Hi Ann After using AVG for ages and getting bad reports I moved to Kaspersky a couple of years ago  and find that it does not slow my computer down or cause any problems for me Regards Paul On 18/09/2016 2:26 AM, Ann Shepherd wrote: > Hi all > > > > I've been running TMG9 in Windows 7 but my laptop is dying I think + I can't > buy any battery for it in Australia any more. So I have to buy a new PC > laptop, which I'll only use for TMG and associated things (TMGU, SecondSite, > MS Office, Access, DragonSpeaking, IrfanView, etc) since I use a Mac for all > our personal computing. (I tried Fusion on the Mac years ago and gave up on > that after endless frustrations so am going to stick with the 2 separate > computers.) > > > > I'd like to make sure I optimise the new laptop as best I can for TMG. Would > like to continue with Windows 7 but I can't buy it anywhere in Australia so > it looks as though I'm going to be stuck with Win10. > > > > Which is the best antivirus, etc software to use with TMG and Second Site? > And is is easy to uninstall McAfee (which it seems I'm also stuck with to > start with but as I understand it causes problems for TMG) and install > something else instead? Any tips on this would be appreciated > > > > Thanks in advance > > > > Ann > > PS Am still plodding along at snail's pace with CrashPlan as a major 2nd > backup in preparation for changeover to a new computer. > > > > > > > > > > The TMG archive is found here: http://archiver.rootsweb.ancestry.com/th/index/TMG/ > Instructions on how to subscribe to TMG: http://lists.rootsweb.ancestry.com/index/other/Software/TMG.html > ------------------------------- > To unsubscribe from the list, please send an email to TMG-request@rootsweb.com with the word 'unsubscribe' without the quotes in the subject and the body of the message > ------------------------------ Message: 4 Date: Sun, 18 Sep 2016 13:11:29 -0400 From: Lee Hoffman/KY <azchief@bellsouth.net> To: TMG List <tmg-l@rootsweb.com> Subject: [TMG] TMG on a MAC Message-ID: <586381.99054.bm@smtp120.sbc.mail.ne1.yahoo.com> Content-Type: text/plain; charset="us-ascii"; format=flowed I have a friend who has been running TMG on his company (Windows) laptop for a number of years.  His company just gave him a MAC.  What is the best way for him to proceed -- Parallels, Crossover, BootCamp, or what? Also, are there any configuration issues on how to best install these? Lee ------------------------------ Message: 5 Date: Sun, 18 Sep 2016 15:51:22 -0400 From: Carol Collins <carolcollins65@gmail.com> To: The Master Genealogist Rootsweb Email List <tmg@rootsweb.com> Subject: Re: [TMG] TMG on a MAC Message-ID: <CAG=r3VbyAFup4h+rSoCrGtGh60MDxN51PQHqSLb9zj4HtwaVgA@mail.gmail.com> Content-Type: text/plain; charset=UTF-8 I have been using Parallels since it first came out - and it works seamlessly and efficiently.  I'd highly recommend it.  I simply installed it, using Parallels' instructions, made sure the tools were installed (usually automatic) and simply begin using it as a PC.  Install TMG 9.5  - no problem.  It can also be used in coherence mode - meaning both sides are usable at once. Carol On Sun, Sep 18, 2016 at 1:11 PM, Lee Hoffman/KY <azchief@bellsouth.net> wrote: > I have a friend who has been running TMG on his company (Windows) laptop > for a number of years.  His company just gave him a MAC.  What is the best > way for him to proceed -- Parallels, Crossover, BootCamp, or what? > > Also, are there any configuration issues on how to best install these? > > Lee > > The TMG archive is found here: http://archiver.rootsweb.ances > try.com/th/index/TMG/ > Instructions on how to subscribe to TMG: http://lists.rootsweb.ancestry > .com/index/other/Software/TMG.html > ------------------------------- > To unsubscribe from the list, please send an email to > TMG-request@rootsweb.com with the word 'unsubscribe' without the quotes > in the subject and the body of the message > ------------------------------ Message: 6 Date: Sun, 18 Sep 2016 16:21:32 -0400 From: Carol Collins <carolcollins65@gmail.com> To: List TMG <TMG@rootsweb.com> Subject: [TMG] Printer problem Message-ID: <CAG=r3VZDTJseyJ2JD0G=ttPfhZk_5root0RzPAd7GuODbwp89A@mail.gmail.com> Content-Type: text/plain; charset=UTF-8 This is only slightly TMG related - in that I'm in the middle of printing out a book and my printer has decided to have a nervous breakdown.  I have an HP Envy 5530 - I changed the ink (both color and black).  It insists on alligning the -- whatever- - and I've always done that.  All, until today, was smooth.  Today it decided to get stuck - and it won't turn off.  There does not seem to be an on-off switch (other than the button that I push to turn it on) and it's wireless.  I turned off the computer for a couple of hours - but the printer is still blinking and waiting for - what???.  Any suggestions on how I can get it turned off would be greatly appreciated. Of coursse it's Sunday..... Thanks so much...Carol ------------------------------ Message: 7 Date: Sun, 18 Sep 2016 20:51:20 +0000 (UTC) From: Fred Claussen <fclausse@pacbell.net> To: The Master Genealogist Rootsweb Email List <tmg@rootsweb.com> Subject: Re: [TMG] Printer problem Message-ID: <1127671562.541245.1474231880671@mail.yahoo.com> Content-Type: text/plain; charset=UTF-8 Carol: Have you tried disconnecting/unplugging the printer from its power source? Try that, wait for a few minutes, and plug it back in, turn on your computer and see if things are back to normal. Fred Claussen     On Sunday, September 18, 2016 1:22 PM, Carol Collins <carolcollins65@gmail.com> wrote: This is only slightly TMG related - in that I'm in the middle of printing out a book and my printer has decided to have a nervous breakdown.? I have an HP Envy 5530 - I changed the ink (both color and black).? It insists on alligning the -- whatever- - and I've always done that.? All, until today, was smooth.? Today it decided to get stuck - and it won't turn off.? There does not seem to be an on-off switch (other than the button that I push to turn it on) and it's wireless.? I turned off the computer for a couple of hours - but the printer is still blinking and waiting for - what???.? Any suggestions on how I can get it turned off would be greatly appreciated. Of coursse it's Sunday..... Thanks so much...Carol The TMG archive is found here: http://archiver.rootsweb.ancestry.com/th/index/TMG/ Instructions on how to subscribe to TMG: http://lists.rootsweb.ancestry.com/index/other/Software/TMG.html ------------------------------- To unsubscribe from the list, please send an email to TMG-request@rootsweb.com with the word 'unsubscribe' without the quotes in the subject and the body of the message    ------------------------------ Message: 8 Date: Mon, 19 Sep 2016 16:56:23 +1000 From: Arthur Edgar <aedgar3@gmail.com> To: Lindsay Graham <tmg@rootsweb.com> Subject: [TMG] TMG Message-ID: <9C9E12DB-C690-466A-878D-90102CE4E062@gmail.com> Content-Type: text/plain; charset=utf-8 Hi Lindsay After we met last month I did go to the Motel at Ginninderra/Federation Village - they never did get back to me but I wouldn?t worry about that as I thought it just barely suitable. There is a new lodge open just near there with conference facilities www.leumeahlodge <http://www.leumeahlodge.com.au/>.com.au/ <http://www.leumeahlodge.com.au/> - But I?m guessing the Dickson location would be more suitable. We would need to act soon to get a booking in place. Do you think there is real interest from the Sydney Group? Recent group messages didn?t seem to suggest many people were turning up even to their Sydney meeting last month. Another option would be for Canberra to arrange the workshop at the proven venue at Campbelltown. I would like to purchase another copy of Penny?s book. I enjoyed it immensely, particularly knowing you and Dennis and also to my surprise - Cheryl Emerson - who sat outside my office for a couple of years in the late 80s. I would like to send a copy to a 2nd cousin of mine in Perth who had felt a bit ostracised from the rest of us just because of the family?s reaction two generations ago when her widowed grandfather married his mother-in-law. The families didn?t have much contact after that. My generation knew nothing of this but she is very much a part of us now. If Penny could inscribe it for June - that would be appreciated. I will be at the October TMG meeting. Kind regards Arthur ------------------------------ Subject: Digest Footer To contact the TMG list administrator, send an email to TMG-admin@rootsweb.com. To post a message to the TMG mailing list, send an email to TMG@rootsweb.com. __________________________________________________________ To unsubscribe from the list, please send an email to TMG-request@rootsweb.com with the word "unsubscribe" without the quotes in the subject and the body of the email with no additional text. ------------------------------ End of TMG Digest, Vol 11, Issue 226 ************************************

Carol: Have you tried disconnecting/unplugging the printer from its power source? Try that, wait for a few minutes, and plug it back in, turn on your computer and see if things are back to normal. Fred Claussen On Sunday, September 18, 2016 1:22 PM, Carol Collins <carolcollins65@gmail.com> wrote: This is only slightly TMG related - in that I'm in the middle of printing out a book and my printer has decided to have a nervous breakdown.  I have an HP Envy 5530 - I changed the ink (both color and black).  It insists on alligning the -- whatever- - and I've always done that.  All, until today, was smooth.  Today it decided to get stuck - and it won't turn off.  There does not seem to be an on-off switch (other than the button that I push to turn it on) and it's wireless.  I turned off the computer for a couple of hours - but the printer is still blinking and waiting for - what???.  Any suggestions on how I can get it turned off would be greatly appreciated. Of coursse it's Sunday..... Thanks so much...Carol The TMG archive is found here: http://archiver.rootsweb.ancestry.com/th/index/TMG/ Instructions on how to subscribe to TMG: http://lists.rootsweb.ancestry.com/index/other/Software/TMG.html ------------------------------- To unsubscribe from the list, please send an email to TMG-request@rootsweb.com with the word 'unsubscribe' without the quotes in the subject and the body of the message

Hi Ann After using AVG for ages and getting bad reports I moved to Kaspersky a couple of years ago and find that it does not slow my computer down or cause any problems for me Regards Paul On 18/09/2016 2:26 AM, Ann Shepherd wrote: > Hi all > > > > I've been running TMG9 in Windows 7 but my laptop is dying I think + I can't > buy any battery for it in Australia any more. So I have to buy a new PC > laptop, which I'll only use for TMG and associated things (TMGU, SecondSite, > MS Office, Access, DragonSpeaking, IrfanView, etc) since I use a Mac for all > our personal computing. (I tried Fusion on the Mac years ago and gave up on > that after endless frustrations so am going to stick with the 2 separate > computers.) > > > > I'd like to make sure I optimise the new laptop as best I can for TMG. Would > like to continue with Windows 7 but I can't buy it anywhere in Australia so > it looks as though I'm going to be stuck with Win10. > > > > Which is the best antivirus, etc software to use with TMG and Second Site? > And is is easy to uninstall McAfee (which it seems I'm also stuck with to > start with but as I understand it causes problems for TMG) and install > something else instead? Any tips on this would be appreciated > > > > Thanks in advance > > > > Ann > > PS Am still plodding along at snail's pace with CrashPlan as a major 2nd > backup in preparation for changeover to a new computer. > > > > > > > > > > The TMG archive is found here: http://archiver.rootsweb.ancestry.com/th/index/TMG/ > Instructions on how to subscribe to TMG: http://lists.rootsweb.ancestry.com/index/other/Software/TMG.html > ------------------------------- > To unsubscribe from the list, please send an email to TMG-request@rootsweb.com with the word 'unsubscribe' without the quotes in the subject and the body of the message >

This is only slightly TMG related - in that I'm in the middle of printing out a book and my printer has decided to have a nervous breakdown. I have an HP Envy 5530 - I changed the ink (both color and black). It insists on alligning the -- whatever- - and I've always done that. All, until today, was smooth. Today it decided to get stuck - and it won't turn off. There does not seem to be an on-off switch (other than the button that I push to turn it on) and it's wireless. I turned off the computer for a couple of hours - but the printer is still blinking and waiting for - what???. Any suggestions on how I can get it turned off would be greatly appreciated. Of coursse it's Sunday..... Thanks so much...Carol

I have been using Parallels since it first came out - and it works seamlessly and efficiently. I'd highly recommend it. I simply installed it, using Parallels' instructions, made sure the tools were installed (usually automatic) and simply begin using it as a PC. Install TMG 9.5 - no problem. It can also be used in coherence mode - meaning both sides are usable at once. Carol On Sun, Sep 18, 2016 at 1:11 PM, Lee Hoffman/KY <azchief@bellsouth.net> wrote: > I have a friend who has been running TMG on his company (Windows) laptop > for a number of years. His company just gave him a MAC. What is the best > way for him to proceed -- Parallels, Crossover, BootCamp, or what? > > Also, are there any configuration issues on how to best install these? > > Lee > > The TMG archive is found here: http://archiver.rootsweb.ances > try.com/th/index/TMG/ > Instructions on how to subscribe to TMG: http://lists.rootsweb.ancestry > .com/index/other/Software/TMG.html > ------------------------------- > To unsubscribe from the list, please send an email to > TMG-request@rootsweb.com with the word 'unsubscribe' without the quotes > in the subject and the body of the message >

I have a friend who has been running TMG on his company (Windows) laptop for a number of years. His company just gave him a MAC. What is the best way for him to proceed -- Parallels, Crossover, BootCamp, or what? Also, are there any configuration issues on how to best install these? Lee

Hi all I've been running TMG9 in Windows 7 but my laptop is dying I think + I can't buy any battery for it in Australia any more. So I have to buy a new PC laptop, which I'll only use for TMG and associated things (TMGU, SecondSite, MS Office, Access, DragonSpeaking, IrfanView, etc) since I use a Mac for all our personal computing. (I tried Fusion on the Mac years ago and gave up on that after endless frustrations so am going to stick with the 2 separate computers.) I'd like to make sure I optimise the new laptop as best I can for TMG. Would like to continue with Windows 7 but I can't buy it anywhere in Australia so it looks as though I'm going to be stuck with Win10. Which is the best antivirus, etc software to use with TMG and Second Site? And is is easy to uninstall McAfee (which it seems I'm also stuck with to start with but as I understand it causes problems for TMG) and install something else instead? Any tips on this would be appreciated Thanks in advance Ann PS Am still plodding along at snail's pace with CrashPlan as a major 2nd backup in preparation for changeover to a new computer.

I've been running McAfee on Win10 with TMG, TMGU and SS on a Lenovo computer for about 1 1/2 years and have had no problems due to McAfee software or viruses. Greg On Sat, Sep 17, 2016 at 9:26 PM, Ann Shepherd <annmcarson@gmail.com> wrote: > Hi all > > > > I've been running TMG9 in Windows 7 but my laptop is dying I think + I > can't > buy any battery for it in Australia any more. So I have to buy a new PC > laptop, which I'll only use for TMG and associated things (TMGU, > SecondSite, > MS Office, Access, DragonSpeaking, IrfanView, etc) since I use a Mac for > all > our personal computing. (I tried Fusion on the Mac years ago and gave up on > that after endless frustrations so am going to stick with the 2 separate > computers.) > > > > I'd like to make sure I optimise the new laptop as best I can for TMG. > Would > like to continue with Windows 7 but I can't buy it anywhere in Australia so > it looks as though I'm going to be stuck with Win10. > > > > Which is the best antivirus, etc software to use with TMG and Second Site? > And is is easy to uninstall McAfee (which it seems I'm also stuck with to > start with but as I understand it causes problems for TMG) and install > something else instead? Any tips on this would be appreciated > > > > Thanks in advance > > > > Ann > > PS Am still plodding along at snail's pace with CrashPlan as a major 2nd > backup in preparation for changeover to a new computer. > > > > > > > > > > The TMG archive is found here: http://archiver.rootsweb. > ancestry.com/th/index/TMG/ > Instructions on how to subscribe to TMG: http://lists.rootsweb. > ancestry.com/index/other/Software/TMG.html > ------------------------------- > To unsubscribe from the list, please send an email to > TMG-request@rootsweb.com with the word 'unsubscribe' without the quotes > in the subject and the body of the message >

You don't need to buy a 3rd party AV with Win 10. Windows Defender is built in to Win10. You just have to uninstall the trial of Mcafee or whatever they are trying to get you to buy and activated Defender. It is an excellent AV program. Because of processor manufacturer's contracts with the 3rd party AV developers they HAVE to load on those trial versions. BUT you do not need them. Just use MS Defender. Before Win10 we used MS Security Essentials (now called Defender) since it became available around 2009, and it was excellent. Kaye Sent from my iPhone > On Sep 17, 2016, at 8:26 PM, Ann Shepherd <annmcarson@gmail.com> wrote: > > Hi all > > > > I've been running TMG9 in Windows 7 but my laptop is dying I think + I can't > buy any battery for it in Australia any more. So I have to buy a new PC > laptop, which I'll only use for TMG and associated things (TMGU, SecondSite, > MS Office, Access, DragonSpeaking, IrfanView, etc) since I use a Mac for all > our personal computing. (I tried Fusion on the Mac years ago and gave up on > that after endless frustrations so am going to stick with the 2 separate > computers.) > > > > I'd like to make sure I optimise the new laptop as best I can for TMG. Would > like to continue with Windows 7 but I can't buy it anywhere in Australia so > it looks as though I'm going to be stuck with Win10. > > > > Which is the best antivirus, etc software to use with TMG and Second Site? > And is is easy to uninstall McAfee (which it seems I'm also stuck with to > start with but as I understand it causes problems for TMG) and install > something else instead? Any tips on this would be appreciated > > > > Thanks in advance > > > > Ann > > PS Am still plodding along at snail's pace with CrashPlan as a major 2nd > backup in preparation for changeover to a new computer. > > > > > > > > > > The TMG archive is found here: http://archiver.rootsweb.ancestry.com/th/index/TMG/ > Instructions on how to subscribe to TMG: http://lists.rootsweb.ancestry.com/index/other/Software/TMG.html > ------------------------------- > To unsubscribe from the list, please send an email to TMG-request@rootsweb.com with the word 'unsubscribe' without the quotes in the subject and the body of the message

There is a setting in the HP Bios that defaults that way. So your bios update probably created the issue. Google "How to enable/disable function keys on an hp" to find directions on how to go into the BIOS and adjust this setting. Thanks, Ruth Ann -----Original Message----- From: TMG [mailto:tmg-bounces+rao911=hotmail.com@rootsweb.com] On Behalf Of Linda Wines Sent: Saturday, September 17, 2016 4:19 PM To: tmg@rootsweb.com Subject: [TMG] Issue with latest BIOS update affecting my keyboard when in TMG My HP system installed the latest BIOS update for Windows 10. TMG is working, but I now have a couple irritating keyboard issues - like needing to press the 'fn' key in order to get the function keys to work. Anyone know what combination of keyboard attributes I need to change to get the Function keys to work by just pressing one key? I've fooled with this all day trying to figure it out! Linda Wines The TMG archive is found here: http://archiver.rootsweb.ancestry.com/th/index/TMG/ Instructions on how to subscribe to TMG: http://lists.rootsweb.ancestry.com/index/other/Software/TMG.html ------------------------------- To unsubscribe from the list, please send an email to TMG-request@rootsweb.com with the word 'unsubscribe' without the quotes in the subject and the body of the message