On 08/06/2015 05:52, Don Ferguson via wrote: > > Having said that, there is one issue I've struck, namely PDF printing would > seem to be a complete no-no. I know some people have never got PDF print > working on Windows 7 or previous, but personally I've never had any issues. > The 'normal' fixes recommended for this problem do not work under Win10 - > I've tried them all, I think. > I have been experimenting with the PDF printer on Windows 10 (64 bit) and I have found that, whilst it does not appear to work when running as a normal user, the Wholly Genes PDF printer works fine when TMG is run as an Administrator. Note: I am running Windows 10 (64 bit) build 10130 on a virtual machine running on VMWare player installed on a Windows 7(64 bit) host machine. -- Wade Oram

In Control Panel, Devices and Printers, I set the Wholly Genes PDF writer to a nul port. The Relationship Chart now runs just fine. I assume also all other reports with PDF output. I think that what caused the problem was an automatic update from Microsoft, possibly having to do with One-Note's need for a printer port. Joan Lince

Den 08.06.2015 17:40, skrev Rob Geldart via: My only printer have been selected the last 25-30 years. There is a mismatch in the TMG together with the windows. Use Win 64 and the setup is not making it easy as it is 32-bits before and setup for 64-bits and then some programs working 86-. I really don't know whats going on. It was all right before an update from Microsoft. Windows sucks!! steinar > In Windows go to control page > Printers > Setup and make sure your > printer is selected as default. > > On 6/8/2015 11:29 AM, Donna M St Felix via wrote: >> Have you checked to make sure all cord plugs are in tight? >> >> >> -----Original Message----- >> From: tmg-bounces@rootsweb.com [mailto:tmg-bounces@rootsweb.com] On Behalf Of Steinar VissebrÃ¥ten via >> Sent: Monday, June 08, 2015 7:23 AM >> To: tmg@rootsweb.com >> Subject: [TMG] Printer problem >> >> >> Hello >> >> My printer keep telling me it is not acctivated!! I have tried so many time to check, install and tried to find out via help. No luck. >> >> What am I doing wrong? >> >> thanks in advance >> Steinar >> >> >> >> The TMG archive is found here: http://archiver.rootsweb.ancestry.com/th/index/TMG/ >> Instructions on how to subscribe to TMG: http://lists.rootsweb.ancestry.com/index/other/Software/TMG.html >> ------------------------------- >> To unsubscribe from the list, please send an email to TMG-request@rootsweb.com with the word 'unsubscribe' without the quotes in the subject and the body of the message >> >> -- >> Bob Geldart >> Maynard, MA >> <BGeldart@verizon.net> > The TMG archive is found here: http://archiver.rootsweb.ancestry.com/th/index/TMG/ > Instructions on how to subscribe to TMG: http://lists.rootsweb.ancestry.com/index/other/Software/TMG.html > ------------------------------- > To unsubscribe from the list, please send an email to TMG-request@rootsweb.com with the word 'unsubscribe' without the quotes in the subject and the body of the message -- Bratt og Ulent. Org. nr. NO 996 718 557 MVA -----------------------------------ooo00ooo---------------------------------- Steinar Vissebråten, Liavegen 149, N-3540 Nesbyen, Norway Phone +47 32068733 Mobil: +47 9069 3540 Bankforbindelse: Gjensidige Bank ASA -----------------------------------ooo00ooo---------------------------------- Internet: vissebraaten.no rukkedalen.com

See if there is an update needed, or rather available for your printer. -----Original Message----- From: tmg-bounces@rootsweb.com [mailto:tmg-bounces@rootsweb.com] On Behalf Of Steinar Vissebråten via Sent: Monday, June 08, 2015 12:35 PM To: Rob Geldart; tmg@rootsweb.com Subject: Re: [TMG] Printer problem Den 08.06.2015 17:40, skrev Rob Geldart via: My only printer have been selected the last 25-30 years. There is a mismatch in the TMG together with the windows. Use Win 64 and the setup is not making it easy as it is 32-bits before and setup for 64-bits and then some programs working 86-. I really don't know whats going on. It was all right before an update from Microsoft. Windows sucks!! steinar > In Windows go to control page > Printers > Setup and make sure your > printer is selected as default. > > On 6/8/2015 11:29 AM, Donna M St Felix via wrote: >> Have you checked to make sure all cord plugs are in tight? >> >> >> -----Original Message----- >> From: tmg-bounces@rootsweb.com [mailto:tmg-bounces@rootsweb.com] On >> Behalf Of Steinar VissebrÃ¥ten via >> Sent: Monday, June 08, 2015 7:23 AM >> To: tmg@rootsweb.com >> Subject: [TMG] Printer problem >> >> >> Hello >> >> My printer keep telling me it is not acctivated!! I have tried so many time to check, install and tried to find out via help. No luck. >> >> What am I doing wrong? >> >> thanks in advance >> Steinar

What about the TMG reports (such as the Relationship Chart) that can print to no other format than PDF? Will Microsoft Print to PDF be able to take the output from that report and convert it to PDF? I fear not. Joan Lince -----Original Message----- From: tmg-bounces@rootsweb.com [mailto:tmg-bounces@rootsweb.com] On Behalf Of Wade Oram via Sent: Monday, June 08, 2015 2:20 AM To: tmg@rootsweb.com Subject: Re: [TMG] TMG 9.05 and Windows 10 - update The lack of support for the TMG pdf printer will not matter as Windows 10 will have 'print to PDF' functionality avialable. Whilst it may not be available by default (It's present in my Win10 installation), it is a Windows 10 feature that can be turned on and off from the control panel. See <http://microsoft-news.com/confirmed-windows-10-to-include-native-print-as-p df-option/> (Note this article was with respect to an earlier build. In build 10130, it appears in the printer list and the Windows Features list as "Microsoft Print to PDF"). On 08/06/2015 05:52, Don Ferguson via wrote: > Having said that, there is one issue I've struck, namely PDF printing > would seem to be a complete no-no. I know some people have never got > PDF print working on Windows 7 or previous, but personally I've never had any issues. > The 'normal' fixes recommended for this problem do not work under > Win10 - I've tried them all, I think. > > Just to recap, TMG's PDF printing is done through a 3rd party product > from Amyuni, and TMG 9.05 uses v4.0 of that product. In answer to a > user query in April, Amyuni stated that: > > "We recently started testing our version v5.0 of the Amyuni PDF > Converter on Windows 10 and have not encountered any issues. At this > time we have no plans to support version v4.5x on windows 10. We are > aiming to release our next major upgrade v6.0 with windows 10 > certification to coincide with the windows 10 release." > > >>From this I conclude that TMG's PDF printing is probably never going >>to work > under Win10. Probably not a big problem for many of us... -- Wade Oram The TMG archive is found here: http://archiver.rootsweb.ancestry.com/th/index/TMG/ Instructions on how to subscribe to TMG: http://lists.rootsweb.ancestry.com/index/other/Software/TMG.html ------------------------------- To unsubscribe from the list, please send an email to TMG-request@rootsweb.com with the word 'unsubscribe' without the quotes in the subject and the body of the message

Further to the recent discussions of TMG Win10 compatibility, I can report that TMG 9.05 runs fine on Windows 10 Preview 10030 (which was last week's release of the preview). I do not expect that situation to change, as the developers are past the 'add features' stage and are in 'bug-fixing' mode leading up to the July 29 release date. Having said that, there is one issue I've struck, namely PDF printing would seem to be a complete no-no. I know some people have never got PDF print working on Windows 7 or previous, but personally I've never had any issues. The 'normal' fixes recommended for this problem do not work under Win10 - I've tried them all, I think. Just to recap, TMG's PDF printing is done through a 3rd party product from Amyuni, and TMG 9.05 uses v4.0 of that product. In answer to a user query in April, Amyuni stated that: "We recently started testing our version v5.0 of the Amyuni PDF Converter on Windows 10 and have not encountered any issues. At this time we have no plans to support version v4.5x on windows 10. We are aiming to release our next major upgrade v6.0 with windows 10 certification to coincide with the windows 10 release." >From this I conclude that TMG's PDF printing is probably never going to work under Win10. Probably not a big problem for many of us... Don Ferguson --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus

Hello My printer keep telling me it is not acctivated!! I have tried so many time to check, install and tried to find out via help. No luck. What am I doing wrong? thanks in advance Steinar -- -----------------------------------ooo00ooo---------------------------------- Steinar Vissebråten, Liavegen 149, N-3540 Nesbyen, Norway Phone +47 32068733 Mobil: +47 9069 3540 -----------------------------------ooo00ooo----------------------------------

What do you have in C:\Users\Dad\AppData\Roaming\The Master Genealogist v9\app.ini? Where "Dad" is my computer name. I have: [Startup] ReloadOnStart=No ShowHintsform=Yes SplashDelay=4 Welcome=1 WelcomeBack=2 SampleLocation=C:\Users\Dad\Documents\The Master Genealogist v9\Projects\Sample\sample__.pjc CheckMessageLast=2457002 CheckMessageDays=0 CheckUpdateLast=2456995 CheckUpdateDays=0 [Database] Prefix= project1=c:\Users\Dad\Documents\The Master Genealogist v9\Projects\Bonneau_2014\Bonneau_2014__.PJC project2=c:\Users\Dad\Documents\The Master Genealogist v9\Projects\Pell\My Project__.PJC project3=c:\Users\Dad\Documents\The Master Genealogist v9\Projects\Sample\sample__.pjc project4= project5= project6= project7= project8= project9= LastUsed=c:\Users\Dad\Documents\The Master Genealogist v9\Projects\Bonneau_2014\Bonneau_2014__.PJC project10= LastRPB= <snip> -----Original Message----- From: tmg-bounces@rootsweb.com [mailto:tmg-bounces@rootsweb.com] On Behalf Of Joan Lince via Sent: Sunday, June 07, 2015 9:29 PM To: tmg@rootsweb.com Subject: [TMG] TMG doesn't remember my last project Since uninstalling and reinstalling TMG 9.05, now each time I start it I have to select My Project, because Last is dimmed out. How can I fix that? I don't find anything in Preferences that seems relevant. I do want to keep the splash screen. Joan Lince The TMG archive is found here: http://archiver.rootsweb.ancestry.com/th/index/TMG/ Instructions on how to subscribe to TMG: http://lists.rootsweb.ancestry.com/index/other/Software/TMG.html ------------------------------- To unsubscribe from the list, please send an email to TMG-request@rootsweb.com with the word 'unsubscribe' without the quotes in the subject and the body of the message

In Windows go to control page > Printers > Setup and make sure your printer is selected as default. On 6/8/2015 11:29 AM, Donna M St Felix via wrote: > Have you checked to make sure all cord plugs are in tight? > > > -----Original Message----- > From: tmg-bounces@rootsweb.com [mailto:tmg-bounces@rootsweb.com] On Behalf Of Steinar Vissebråten via > Sent: Monday, June 08, 2015 7:23 AM > To: tmg@rootsweb.com > Subject: [TMG] Printer problem > > > Hello > > My printer keep telling me it is not acctivated!! I have tried so many time to check, install and tried to find out via help. No luck. > > What am I doing wrong? > > thanks in advance > Steinar > > > > The TMG archive is found here: http://archiver.rootsweb.ancestry.com/th/index/TMG/ > Instructions on how to subscribe to TMG: http://lists.rootsweb.ancestry.com/index/other/Software/TMG.html > ------------------------------- > To unsubscribe from the list, please send an email to TMG-request@rootsweb.com with the word 'unsubscribe' without the quotes in the subject and the body of the message > > -- > Bob Geldart > Maynard, MA > <BGeldart@verizon.net>

Have you checked to make sure all cord plugs are in tight? -----Original Message----- From: tmg-bounces@rootsweb.com [mailto:tmg-bounces@rootsweb.com] On Behalf Of Steinar Vissebråten via Sent: Monday, June 08, 2015 7:23 AM To: tmg@rootsweb.com Subject: [TMG] Printer problem Hello My printer keep telling me it is not acctivated!! I have tried so many time to check, install and tried to find out via help. No luck. What am I doing wrong? thanks in advance Steinar

The lack of support for the TMG pdf printer will not matter as Windows 10 will have 'print to PDF' functionality avialable. Whilst it may not be available by default (It's present in my Win10 installation), it is a Windows 10 feature that can be turned on and off from the control panel. See <http://microsoft-news.com/confirmed-windows-10-to-include-native-print-as-pdf-option/> (Note this article was with respect to an earlier build. In build 10130, it appears in the printer list and the Windows Features list as "Microsoft Print to PDF"). On 08/06/2015 05:52, Don Ferguson via wrote: > Having said that, there is one issue I've struck, namely PDF printing would > seem to be a complete no-no. I know some people have never got PDF print > working on Windows 7 or previous, but personally I've never had any issues. > The 'normal' fixes recommended for this problem do not work under Win10 - > I've tried them all, I think. > > Just to recap, TMG's PDF printing is done through a 3rd party product from > Amyuni, and TMG 9.05 uses v4.0 of that product. In answer to a user query > in April, Amyuni stated that: > > "We recently started testing our version v5.0 of the Amyuni PDF Converter on > Windows 10 and have not encountered any issues. At this time we have no > plans to support version v4.5x on windows 10. We are aiming to release our > next major upgrade v6.0 with windows 10 certification to coincide with the > windows 10 release." > > >>From this I conclude that TMG's PDF printing is probably never going to work > under Win10. Probably not a big problem for many of us... -- Wade Oram

-----Original Message----- From: Joan Lince [mailto:joanklince@earthlink.net] Sent: Saturday, June 06, 2015 9:40 PM To: 'Virginia Blakelock' Subject: RE: [TMG] Can't create Relationship Chart Virginia, thanks. Answers interleaved below. Joan -----Original Message----- From: Virginia Blakelock [mailto:vblakelock@gmail.com] Sent: Saturday, June 06, 2015 8:44 PM To: Joan Lince; tmg@rootsweb.com Subject: Re: [TMG] Can't create Relationship Chart Joan - I have no problems with that report to PDF or to screen with v9.05 and Win7. Are you getting an error message? None. Windows eventually tells me TMG isn't responding. Have you installed the PDF printer (File / Printer setup/ Install PDF printer) ? It tells me it's already installed. Can you send the report to Screen Preview? Yes, successfully. Try using the Delete button under the Configuration name to reset the report defaults and see if that helps. It didn't help. Virginia On Sat, Jun 6, 2015 at 8:04 PM, Joan Lince via <tmg@rootsweb.com> wrote: > TMG hangs for me when I try to do a Relationship Chart, but not when I > do a text report such as Individual Narrative. So I assume PDF is the > issue. The last PDF report I ran from TMG was 6 weeks ago. I searched > the TMG archives for a solution but didn't find one. I tried the Forum > but I've never been good at navigating it, and didn't find anything relevant. > > I tried uninstalling and reinstalling TMG but that didn't solve it. > Because I recalled a conflict with Dropbox I uninstalled that and > again uninstalled and reinstalled TMG but still no ability to do a Relationship Chart. > > I have TMG 9.05 and Win 7. > > Any suggestions? > > > > Joan Lince > > > > The TMG archive is found here: > http://archiver.rootsweb.ancestry.com/th/index/TMG/ > Instructions on how to subscribe to TMG: > http://lists.rootsweb.ancestry.com/index/other/Software/TMG.html > ------------------------------- > To unsubscribe from the list, please send an email to > TMG-request@rootsweb.com with the word 'unsubscribe' without the > quotes in the subject and the body of the message

Nancy, Thanks for your reply, but I do want the Welcome Window. It offers a chance to get out of a jam if your project is corrupted -- you can get TMG to open by selecting the Sample Project. So I don't want to get rid of it. Joan -----Original Message----- From: Nancy Archdekin [mailto:archde.omaha@cox.net] Sent: Sunday, June 07, 2015 11:35 PM To: joanklince@earthlink.net; tmg@rootsweb.com Subject: Re: [TMG] TMG doesn't remember my last project Joan, I think what you want is Preferences>Program Options>Start then uncheck Show Welcome Window At 09:29 PM 6/7/2015, you wrote: >Since uninstalling and reinstalling TMG 9.05, now each time I start it >I have to select My Project, because Last is dimmed out. How can I fix >that? I don't find anything in Preferences that seems relevant. I do >want to keep the splash screen. > > Joan Lince

I've been using both CutePDF (freeware) and Nitro Pro 8 (came on my Lenovo) to create PDFs. CutePDF acts as a printer, so is transparent to any program. I just created about 18m of box charts for a family reunion, all in 508m-wide pages to be printed on a plotter, and that worked fine. (BTW, I used to use PDFCreator, but I couldn't work out how to get page settings for a plotter. For CutePDF this is no problem.) Rick Van Dusen On 6/7/2015 9:52 PM, Don Ferguson via wrote: > Further to the recent discussions of TMG Win10 compatibility, I can report > that TMG 9.05 runs fine on Windows 10 Preview 10030 (which was last week's > release of the preview). I do not expect that situation to change, as the > developers are past the 'add features' stage and are in 'bug-fixing' mode > leading up to the July 29 release date. > > > > Having said that, there is one issue I've struck, namely PDF printing would > seem to be a complete no-no. I know some people have never got PDF print > working on Windows 7 or previous, but personally I've never had any issues. > The 'normal' fixes recommended for this problem do not work under Win10 - > I've tried them all, I think. > > > > Just to recap, TMG's PDF printing is done through a 3rd party product from > Amyuni, and TMG 9.05 uses v4.0 of that product. In answer to a user query > in April, Amyuni stated that: > > "We recently started testing our version v5.0 of the Amyuni PDF Converter on > Windows 10 and have not encountered any issues. At this time we have no > plans to support version v4.5x on windows 10. We are aiming to release our > next major upgrade v6.0 with windows 10 certification to coincide with the > windows 10 release." > > > >>From this I conclude that TMG's PDF printing is probably never going to work > under Win10. Probably not a big problem for many of us... > > > > Don Ferguson

Joan, I think what you want is Preferences>Program Options>Start then uncheck Show Welcome Window At 09:29 PM 6/7/2015, you wrote: >Since uninstalling and reinstalling TMG 9.05, now each time I start it I >have to select My Project, because Last is dimmed out. How can I fix that? I >don't find anything in Preferences that seems relevant. I do want to keep >the splash screen. > > Joan Lince

Since uninstalling and reinstalling TMG 9.05, now each time I start it I have to select My Project, because Last is dimmed out. How can I fix that? I don't find anything in Preferences that seems relevant. I do want to keep the splash screen. Joan Lince

The Seattle TMG Users Group meets Saturday, June 13, at Aljoya Thornton Place (near Northgate Mall), 450 NE 100th, 2:00-4:30 p.m. The main entrance is at the corner of 5th Ave. NE and NE 100th St. Free parking is available across the street at the Group Health parking lot, and on the surrounding streets. The main topic this month is Evidence Explained, 3rd Edition (2015), by Elizabeth Shown Mills, particularly her new terms for citing online sources: "layered citations," "paths," and "search" terms. Examples will include UK parish registers, UK census records, and passenger lists. For driving directions and a map of the Aljoya neighborhood, see: http://www.eraliving.com/communities/north-seattle/map-directions For bus routing and scheduling information, see the King County Metro Trip Planner: http://tripplanner.kingcounty.gov/hiwire?.a=iTripPlanning

Since my Milit-Beg - military beginning - and the Milit-End - military ending - covered 21 years, and a lot of events happened in those years, so I created a Milit-Asgn which shows every time I (and then my wife of 49 years) moved and changed military jobs and/or locations. Then I could put the life events, like Residence and Births in-between each Milit-Asgn. Kirk -----Original Message----- From: tmg-bounces@rootsweb.com [mailto:tmg-bounces@rootsweb.com] On Behalf Of Terry Reigel via Sent: Sunday, 7 June, 2015 15:56 To: tmg@rootsweb.com Subject: Re: [TMG] Military Tag On 6/7/2015 2:59 PM, Kathie Fortner via wrote: > I have not used this tag much and it is asking for two people and the > sentence reads P and PO - is this the way it should be? Why would it > be asking for two people? > Kathie, There are only two standard military Tag Types. Their sentences are: Military-Begin: [P] <|and [PO]> began military service <[D]> <[L]> <[M]> Military-End: [P] <|and [PO]> ended military service <[D]> <[L]> If you have any other Military Tag Type it is a custom Tag Type, so there is no "should be" other than what you want it to be. Terry Reigel The TMG archive is found here: http://archiver.rootsweb.ancestry.com/th/index/TMG/ Instructions on how to subscribe to TMG: http://lists.rootsweb.ancestry.com/index/other/Software/TMG.html ------------------------------- To unsubscribe from the list, please send an email to TMG-request@rootsweb.com with the word 'unsubscribe' without the quotes in the subject and the body of the message

At 6/7/2015 18:00, Kathie Fortner wrote: >When I try to add the tag, I bring up say mil beg, it fills in the man I am >on, the tag sentence box when I click on it shows the sentence but when I >say okay it does not show in the details view. I don't understand what I am >doing wrong. I just tried anecdote and it doesn't save and show in the >details view either. Have I got a problem? Tag Sentences do not normally display in the Tag Entry window unless the default Sentence has been altered for that Tag. If you open the Sentence Structure window (by clicking on the [Sentence] button) the Sentence will show in the field labeled "Sentence Structure (Default)". If you then modify that Sentence and save the change then the changed Sentence(s) will display under the [Sentence] button and re-opening the Sentenced Structure window will have a new label for the field showing "(Custom)" instead of "(Default)". Lee

Thanks Terry, wow that's a relief. On Sun, Jun 7, 2015 at 6:09 PM, Terry Reigel via <tmg@rootsweb.com> wrote: > On 6/7/2015 6:00 PM, Kathie Fortner wrote: > > When I try to add the tag, I bring up say mil beg, it fills in the man > > I am on, the tag sentence box when I click on it shows the sentence > > but when I say okay it does not show in the details view. I don't > > understand what I am doing wrong. I just tried anecdote and it > > doesn't save and show in the details view either. Have I got a problem? > > Kathie, > > No. Most likely the issue is you have the tag list filtered. Does it say > "Filtered" in red at the top? If so, right-click anywhere in the box. > Halfway down, click on "Filtered for..." and then click whichever item > has a check mark in front of it. > > Terry Reigel > The TMG archive is found here: > http://archiver.rootsweb.ancestry.com/th/index/TMG/ > Instructions on how to subscribe to TMG: > http://lists.rootsweb.ancestry.com/index/other/Software/TMG.html > ------------------------------- > To unsubscribe from the list, please send an email to > TMG-request@rootsweb.com with the word 'unsubscribe' without the quotes > in the subject and the body of the message > -- * Kathie Fortner* * <kathie.fortner@gmail.com>* *www.fortner.50megs.com <http://www.fortner.50megs.com>*