Hi, I can't seem to get VCF to accept my roll printer. In the past I had to make the printer my default printer and then VCF would accept the different printing sizes. But now the page setup just accepts regular paper. Does anyone know how to get it to accept the roll paper? The chart is 13X38 and I have 13" roll paper. I tried exporting to jpg to print that way but when it exports it resizeds to 17.333 X 49.333 resolution 72. If I scale it down I loose some of the lines. Patt -- Patt Ricketts www.jackandpatt.com

BTW, John, there were 7 people it didn't work for (I found them in TMG by filtering the PE for Name-Marr date field not empty). All 7 were "between" dates. No problem deleting those dates by hand, but thought you should know that ^.*$ didn't quite get rid of them all, though close enough - lots better than the 754 there were before. -- Kathryn > > -----Original Message----- > > Kathryn, > > Set the options like this:

Thanks! -- Kathryn > -----Original Message----- > Kathryn, > Set the options like this:

I want to eliminate all the dates from Name-Marr. I tried below but that gives me Error 5018, invalid pattern. Options: Field: Name Date (Regular only) Find what: * Replace with: <ignored; Find All only> In Names: Name-Marr Contents must match Find What exactly: Unchecked Use Pattern Matching: Checked Match case: Unchecked Find Whole Word Only: <na> Convert to Regular Date: Checked Copy to Sort Date: Checked I know that I could Delete Tags by Type and then go back and Add Married Names, but I have a bunch of people who shouldn't have married names and I don't remember them all. So, is there a Utility option to just get rid of the dates in the Name-Marr field? -- Kathryn Bassett kathrynatgwens@socal.rr.com (work) kathryn@bassett.net (home)

Linda M. Towne wrote, in part: > (and thanks also to John Cardinal for his excellent utility!) Linda, You're welcome. If you need any advice about how to use the Exclude Citations feature, let me know. John P.S. I am in the middle of my big push to make the fundraising minimum for the charity I support partly through TMG Utility. If you'd like to help, here's the donation link: https://www.pmc.org/egifts/giftinfo.asp?eGiftID=JC0092 Thanks to everyone who has already donated. If you have not received a personal thank you note yet, you will. I am still focused on fundraising because I am a couple thousand short of the minimum!

Thank you Terry and Michael - that's exactly what I needed! (and thanks also to John Cardinal for his excellent utility!) On 8/18/2015 12:46 PM, Terry Reigel via wrote: > > Linda, > > Michael has told you how to do it manually as you go through each Tag. > If you have lots of citations to this source that already have other > sources cites the TMG Utility has a feature designed specifically for > this task. The Functions > Citations > Exclude Citations >...by Source > feature does just that. You can either exclude all citations to that > source, or only those in tags which also have a citation to another source. > > Terry Reigel >

On 8/18/2015 12:10 PM, Linda M. Towne via wrote: > Is there a way (perhaps with TMG Utility?) to suppress citations of a > particular source? I have a source that doesn't have a very high surety > (a gedcom from another researcher) and I've slowly been going through > and finding better sources for the information it provided. I would like > to suppress that source for those tags where I have one or more > additional sources. is that possible? and if so, how? Linda, Michael has told you how to do it manually as you go through each Tag. If you have lots of citations to this source that already have other sources cites the TMG Utility has a feature designed specifically for this task. The Functions > Citations > Exclude Citations >...by Source feature does just that. You can either exclude all citations to that source, or only those in tags which also have a citation to another source. Terry Reigel

Is there a way (perhaps with TMG Utility?) to suppress citations of a particular source? I have a source that doesn't have a very high surety (a gedcom from another researcher) and I've slowly been going through and finding better sources for the information it provided. I would like to suppress that source for those tags where I have one or more additional sources. is that possible? and if so, how? Thanks --

Linda Towne asked: > Is there a way ... to suppress citations of a particular source? > I would like to suppress that source for those tags where I have > one or more additional sources. Easily done, Linda, When you open the tag with such a citation, RIGHT click on the citation. Then choose "Exclude this citation" in the menu. For any report where you do _not_ choose the Report Option to "Show excluded data" that citation will be suppressed. But you can still produce reports for your own purposes which include those citations by selecting that option. Hope this gives you ideas, Michael

Since they don't seem to be indexed and I was looking for a particular estate. I wrote down the image numbers up through the guy I was looking for, and sending to this list in case it helps someone else. https://familysearch.org/search/collection/1920234 Click on the Browse through Click on Cayuga Click on Estate papers 1799-1905 box 7 David Jessup image 4 James Louw image 19 John LeSuer image 38 Moses Lyon image 47 James Lowry image 109 Younglove Manrow image 126 Samuel Love image 154 Frederick Kellogg image 171 Amasa Lee image 194 James Lake image 204 Thomas Jones image 255 Mathias Hufman image 277 Samuel Hoskins image 320 Banj Howland image 341 David Garton image 359 Thomas Jeffries image 404 Bela Fosgate image 418 Amasa Jefferies image 443 Abraham Hinman image 463 Amos Hurlbut image 479 Jason Goodyear image 502 Joseph Goodyear image 515 William Heazlit image 575 Sarah Hudson image 590 Jacob Hopping image 602 William Henry image 614 (the guy I wanted) -- Kathryn Bassett kathrynatgwens@socal.rr.com (work) kathryn@bassett.net (home)

At 8/17/2015 03:37, John Hanson wrote: >Two datasets in the same project does seem the more logical and the reason >for importing it into a separate dataset of course is to make it easier to >tidy it up first. Just for the record, during an import of data from any other source, the data must go into a new data set. If the data then needs to be part of an existing data set, it may be merged into the other data set. >Now to fine an easy day to find the people that appear in both sets! [I think your keyboard may be playing with you. <VBG>] I find a good way is to locate the same person in both data sets is to have both data sets enabled and filter the Project Explorer to show just those persons (and other related persons) -- say something like: Is an Ancestor of of ID # [?] OR Is an Ancestor of of ID # [?] END I almost always use the "[?]" Value in filters as that allows me to quickly change my mind as to the desired focus persons. In the case of a filter like this with multiple data sets, the vale entered would be like "1:1" and "2:16" (no quotes) where the data set ID# is the leading part before the separating colon. If you just enter the persons' ID#, TMG will ask for the ID#. The above may not be the best filter for you, but there are many others that will make the PE show a smaller subset of the people in the two data sets. This will allow you to easily look at and compare the similar persons from both data sets. A Focus Group is another method. The advantage of the PE is that the arrows at the top of the PE allow you to easily "step through" the persons in the PE. Lee

Lee Thanks you for thoughts. I must admit that having been "shown" TMG by someone and it was more Second Site that I wanted, I learnt by their mistakes. I should have remembered my own early computing days and gone back to basics and learnt it myself from scratch - but then most of us these days want to hit the road running and TMG isn't that easy! Two datasets in the same project does seem the more logical and the reason for importing it into a separate dataset of course is to make it easier to tidy it up first. Now to fine an easy day to find the people that appear in both sets! Regards John Hanson Researcher, The Halsted Trust Website - www.halstedresearch.org.uk -----Original Message----- From: Lee Hoffman/KY [mailto:azchief@bellsouth.net] Sent: 15 August 2015 18:56 To: John Hanson; tmg@rootsweb.com Subject: Re: [TMG] New project or new dataset At 8/15/2015 04:31, John Hanson wrote: >I run a large one-name study which is currently predominately UK based. >The odd entries in there for the USA are were someone has migrated in >recent years. The current database contains in excess of 26,000 people > >I have been working separately on a new set of data in Family >Historian, I find it much easier to add people quickly there as you can >use drag and drop on a chart to add people. This file contains the over >2,500 people descended from the earliest Halstead that arrived in the US in the 1640's. > >I want to import this file ultimately into the main TMG database but >thought that it would be easier to import it into a separate TMG >project first. The problem then is how to compare the two to see where the duplicates might be. >I then realised that I can add a separate dataset into the existing >project and I am struggling to understand exactly how it works. > >Can someone give me some simple pointers. > >If I have it as a separate dataset in the existing project can I easily >import it into the master dataset? Any import into TMG must be into a new data set. That new data set could be in an existing project _or_ in a new project. Since a data sets in a project is completely separate from any other data set in that project, it really makes no difference (except person preference) as to which way an import is done. With an import into an existing project, a step would be saved of merging project _if_ that is anticipated. The Data Set Manager of a project allows a data set to be enabled or disabled. If a data set is disabled, all data (persons, sources, repositories, exhibits, etc.) in that data set are effectively hidden and cannot be seen or manipulated in any way until such time as that data set is enabled. With this in mind, if I were planning to import data into TMG with the aim of eventually merging that data into an existing data set, I would import into the project containing the proposed target data set. I could then enable/disable the data sets that are/are not of interest as I had need _or_ I could simply have them all enabled to see all the data. I do this often with client data sets in my main project because if is not unusual for me to have someone in my main data set that is also in the client data set. I can then easily copy from one data set to the other as I have need. (I can also _move_ person(s) from one data set to the other - but I _usually_ prefer copying as that is less hazardous to the original data set). TMG Help has good discussions of both copying & moving persons between data sets. Having said all this, it really comes down to personal preference. Importing into an existing project may save a few keystrokes (the later merging of projects) but that really is not that big a deal if one feels safer. Having multiple projects does mean that the data from one data set (in say project A) cannot be easily compared with data from a data set in project B. Of course, one can do this by having two instances of TMG open, so this isn;t really a big disadvantage either. So, really, flip a coin and tip it toward the way you feel more compfortable. Lee

Thanks for all this great advice. It all seems relevant and confirms what I eventually came to realise - I had to see what was going on in those log files. The problem appears to have been solved by changing the permissions as has been suggested. I believe (fingers crossed) I've got things running smoothly again without the error messages. I am so relieved! Again, many thanks for your input. Jeanette Hartnack -----Original Message----- From: tmg-bounces@rootsweb.com [mailto:tmg-bounces@rootsweb.com] On Behalf Of Jeff Piper via Sent: Sunday, 16 August 2015 8:33 AM To: Dennis Lee Bieber; tmg@rootsweb.com Subject: Re: [TMG] TMG v9.5 with Windows 10 - Program Error DEnnis is probably right about ownership of files. When you access Cortana it suggestes it will work better with a Microsoft login and if you provide one then you login to your machine with that not your original login so there is a change of ownership Jeff On 15/08/2015 6:16 PM, Dennis Lee Bieber via wrote: > At 03:52 AM 8/15/2015, Jeanette Hartnack via wrote: > Off-hand, the ownership and protections of your USER data > files were changed in the Win10 upgrade. > > Reinstall/Repair only affects the executable program (which > should have been in C:\program files (x86)\something ), not user data files. > > Out of curiousity -- do you actually log into that machine > with a user name of "user"? That's what the file paths are claiming. > > If so, my suggestion would be to navigate to the > c:\users\user directory, right click the "documents" icon (may display > as "my documents"), select Properties. > > Step 1: click the [] Read-only box until it is not shaded or > check-marked, then hit [Apply] and respond yes to all the following pop-ups. > > If TMG still gives the error, you may have to return to the > properties page and pick the Security tab, pick your user account, and > if you don't have all permissions, pick the [Edit] button... > Select the user account (again), then [X] the boxes in the allow > column (typically everything except the last "special" box need to be > selected). Note: this step may need to be performed on each layer of > files and directories. > > -- > bieber.genealogy@earthlink.net Dennis Lee Bieber > HTTP://home.earthlink.net/~bieber.genealogy/ >

Well, at least I'm not the only one who's encountered this! The thought that a Windows update had changed something had crossed my mind. Now it seems it definitely had a part to play. As to running TMG as administrator I hadn't thought to do that - thanks for that tip. -----Original Message----- From: tmg-bounces@rootsweb.com [mailto:tmg-bounces@rootsweb.com] On Behalf Of Bob Geldart via Sent: Sunday, 16 August 2015 1:36 AM To: tmg@rootsweb.com Subject: Re: [TMG] TMG v9.5 with Windows 10 - Program Error I had the same problem. I think there might have been a Win patch. Run TMG as administrator and those errors stopped. Later some more Win patches were applied and the problem went away. It also shut down Norton and turned off my wiFi. Don't know if they were all related, but spent a few hours yesterday with these problems. Look for Windows updates. bob On 8/15/2015 3:52 AM, Jeanette Hartnack via wrote: > Hello fellow TMG users. > > > > I am hoping someone on the list can help me through a problem I've > encountered in the last few days. I have the Gold UK edition, version > 9.05, and I am also using Windows 10. > > > > When launching TMG I get a Program Error which says: > > > > File access is denied > > c:\users\user\documents\the master genealogist v9\log > s\_programstartlog.log. > > > > The only way I can get the program to continue on is to select 'Ignore'. > > > > When the 'Welcome Window' appears I can select the last file used, but > then I get the following error message: > > > > File access is denied c:\users\userdocuments\the > master genealogist v9\logs\registercontrol.log. > > 13 TMGAPPOBJ.MOCX > > > > Again, if I select 'Ignore', the program proceeds to open my 'last > file used'. > > > > However, from here on, I can't generate reports or perform a backup > successfully. I have not attempted any data entry since this problem > started, so I do not know if the error affects this. > > > > I have attempted to repair the program by running the program > installer for v 9.5 (tmg9uksetup.exe) as an administrator. I've also > uninstalled and reinstalled the program, but still get the same program error messages. > > > > I am really concerned about it! > > > > Please - would anyone have any ideas on what could be happening here > and what to do to fix it? I would be very grateful for any help anyone can give. > > > > Regards, > > > > Jeanette Hartnack > > > > > > The TMG archive is found here: > http://archiver.rootsweb.ancestry.com/th/index/TMG/ > Instructions on how to subscribe to TMG: > http://lists.rootsweb.ancestry.com/index/other/Software/TMG.html > ------------------------------- > To unsubscribe from the list, please send an email to > TMG-request@rootsweb.com with the word 'unsubscribe' without the > quotes in the subject and the body of the message > > > -- > Bob Geldart > Maynard, MA > > Searching: Geldart/Gildart, Venti, Willcutt, Besaw, Bubar, Maynard The TMG archive is found here: http://archiver.rootsweb.ancestry.com/th/index/TMG/ Instructions on how to subscribe to TMG: http://lists.rootsweb.ancestry.com/index/other/Software/TMG.html ------------------------------- To unsubscribe from the list, please send an email to TMG-request@rootsweb.com with the word 'unsubscribe' without the quotes in the subject and the body of the message

1. It was *not *necessary to reinstall TMG, only to run it as administrator once, and no subsequent file errors. I never had need to look at those log files before. 2. The other errors were fixed after using HP Utility and Windows update. Took about 10-15 minutes to install updates, but all was well after that. 3. It turned off Norton360, which took me over an hour to get back. Was finally able to run and install update. Bob On 8/16/2015 5:10 PM, Walter D Wood via wrote: > I am also having this problem. Plus, OneDrive quit and Family Tree Maker > died during an update and won't restart. The last Windows Update was the > 14th. Not sure if this was the cause or not. > > I will checkout the fixes for TMG listed earlier. > > Walter > > -----Original Message----- > From: tmg-bounces@rootsweb.com [mailto:tmg-bounces@rootsweb.com] On Behalf > Of Jeanette Hartnack via > Sent: Sunday, August 16, 2015 11:13 AM > To: 'Jeff Piper' <lambtonwyrm@gmail.com>; tmg@rootsweb.com > Subject: Re: [TMG] TMG v9.5 with Windows 10 - Program Error > > Thanks for all this great advice. It all seems relevant and confirms what I > eventually came to realise - I had to see what was going on in those log > files. > > The problem appears to have been solved by changing the permissions as has > been suggested. I believe (fingers crossed) I've got things running smoothly > again without the error messages. I am so relieved! Again, many thanks for > your input. > > Jeanette Hartnack > > > -----Original Message----- > From: tmg-bounces@rootsweb.com [mailto:tmg-bounces@rootsweb.com] On Behalf > Of Jeff Piper via > Sent: Sunday, 16 August 2015 8:33 AM > To: Dennis Lee Bieber; tmg@rootsweb.com > Subject: Re: [TMG] TMG v9.5 with Windows 10 - Program Error > > DEnnis is probably right about ownership of files. > When you access Cortana it suggestes it will work better with a Microsoft > login and if you provide one then you login to your machine with that not > your original login so there is a change of ownership > > Jeff > > On 15/08/2015 6:16 PM, Dennis Lee Bieber via wrote: >> At 03:52 AM 8/15/2015, Jeanette Hartnack via wrote: > >> Off-hand, the ownership and protections of your USER data >> files were changed in the Win10 upgrade. >> >> Reinstall/Repair only affects the executable program (which >> should have been in C:\program files (x86)\something ), not user data > files. >> Out of curiousity -- do you actually log into that machine >> with a user name of "user"? That's what the file paths are claiming. >> >> If so, my suggestion would be to navigate to the >> c:\users\user directory, right click the "documents" icon (may display >> as "my documents"), select Properties. >> >> Step 1: click the [] Read-only box until it is not shaded or >> check-marked, then hit [Apply] and respond yes to all the following > pop-ups. >> If TMG still gives the error, you may have to return to the >> properties page and pick the Security tab, pick your user account, and >> if you don't have all permissions, pick the [Edit] button... >> Select the user account (again), then [X] the boxes in the allow >> column (typically everything except the last "special" box need to be >> selected). Note: this step may need to be performed on each layer of >> files and directories. >> >> -- >> bieber.genealogy@earthlink.net Dennis Lee Bieber >> HTTP://home.earthlink.net/~bieber.genealogy/ >> > The TMG archive is found here: > http://archiver.rootsweb.ancestry.com/th/index/TMG/ > Instructions on how to subscribe to TMG: > http://lists.rootsweb.ancestry.com/index/other/Software/TMG.html > ------------------------------- > To unsubscribe from the list, please send an email to > TMG-request@rootsweb.com with the word 'unsubscribe' without the quotes in > the subject and the body of the message > > The TMG archive is found here: http://archiver.rootsweb.ancestry.com/th/index/TMG/ > Instructions on how to subscribe to TMG: http://lists.rootsweb.ancestry.com/index/other/Software/TMG.html > ------------------------------- > To unsubscribe from the list, please send an email to TMG-request@rootsweb.com with the word 'unsubscribe' without the quotes in the subject and the body of the message > > > -- > Bob Geldart > Maynard, MA > > Searching: Geldart/Gildart, Venti, Willcutt, Besaw, Bubar, Maynard

Hi List With update to Windows 10 I had a error message for the following file COMDLG32.OCX, I found the file at Window/sysWOW64/COMDLG32.OCX. I download a TMG V9.05 and did a repair, and I was able to restore my project. Hope this will help if you have the same error. Robert

I am also having this problem. Plus, OneDrive quit and Family Tree Maker died during an update and won't restart. The last Windows Update was the 14th. Not sure if this was the cause or not. I will checkout the fixes for TMG listed earlier. Walter -----Original Message----- From: tmg-bounces@rootsweb.com [mailto:tmg-bounces@rootsweb.com] On Behalf Of Jeanette Hartnack via Sent: Sunday, August 16, 2015 11:13 AM To: 'Jeff Piper' <lambtonwyrm@gmail.com>; tmg@rootsweb.com Subject: Re: [TMG] TMG v9.5 with Windows 10 - Program Error Thanks for all this great advice. It all seems relevant and confirms what I eventually came to realise - I had to see what was going on in those log files. The problem appears to have been solved by changing the permissions as has been suggested. I believe (fingers crossed) I've got things running smoothly again without the error messages. I am so relieved! Again, many thanks for your input. Jeanette Hartnack -----Original Message----- From: tmg-bounces@rootsweb.com [mailto:tmg-bounces@rootsweb.com] On Behalf Of Jeff Piper via Sent: Sunday, 16 August 2015 8:33 AM To: Dennis Lee Bieber; tmg@rootsweb.com Subject: Re: [TMG] TMG v9.5 with Windows 10 - Program Error DEnnis is probably right about ownership of files. When you access Cortana it suggestes it will work better with a Microsoft login and if you provide one then you login to your machine with that not your original login so there is a change of ownership Jeff On 15/08/2015 6:16 PM, Dennis Lee Bieber via wrote: > At 03:52 AM 8/15/2015, Jeanette Hartnack via wrote: > Off-hand, the ownership and protections of your USER data > files were changed in the Win10 upgrade. > > Reinstall/Repair only affects the executable program (which > should have been in C:\program files (x86)\something ), not user data files. > > Out of curiousity -- do you actually log into that machine > with a user name of "user"? That's what the file paths are claiming. > > If so, my suggestion would be to navigate to the > c:\users\user directory, right click the "documents" icon (may display > as "my documents"), select Properties. > > Step 1: click the [] Read-only box until it is not shaded or > check-marked, then hit [Apply] and respond yes to all the following pop-ups. > > If TMG still gives the error, you may have to return to the > properties page and pick the Security tab, pick your user account, and > if you don't have all permissions, pick the [Edit] button... > Select the user account (again), then [X] the boxes in the allow > column (typically everything except the last "special" box need to be > selected). Note: this step may need to be performed on each layer of > files and directories. > > -- > bieber.genealogy@earthlink.net Dennis Lee Bieber > HTTP://home.earthlink.net/~bieber.genealogy/ > The TMG archive is found here: http://archiver.rootsweb.ancestry.com/th/index/TMG/ Instructions on how to subscribe to TMG: http://lists.rootsweb.ancestry.com/index/other/Software/TMG.html ------------------------------- To unsubscribe from the list, please send an email to TMG-request@rootsweb.com with the word 'unsubscribe' without the quotes in the subject and the body of the message

DEnnis is probably right about ownership of files. When you access Cortana it suggestes it will work better with a Microsoft login and if you provide one then you login to your machine with that not your original login so there is a change of ownership Jeff On 15/08/2015 6:16 PM, Dennis Lee Bieber via wrote: > At 03:52 AM 8/15/2015, Jeanette Hartnack via wrote: >> Hello fellow TMG users. >> >> >> >> I am hoping someone on the list can help me through a problem I've >> encountered in the last few days. I have the Gold UK edition, version 9.05, >> and I am also using Windows 10. >> >> >> >> When launching TMG I get a Program Error which says: >> >> >> >> File access is denied >> >> c:\users\user\documents\the master genealogist v9\log >> s\_programstartlog.log. >> > <SNIP > >> >> I have attempted to repair the program by running the program installer for >> v 9.5 (tmg9uksetup.exe) as an administrator. I've also uninstalled and >> reinstalled the program, but still get the same program error messages. >> >> >> >> I am really concerned about it! >> >> >> >> Please - would anyone have any ideas on what could be happening here and >> what to do to fix it? I would be very grateful for any help anyone can give. > Off-hand, the ownership and protections of your USER data > files were changed in the Win10 upgrade. > > Reinstall/Repair only affects the executable program (which > should have been in C:\program files (x86)\something ), not user data files. > > Out of curiousity -- do you actually log into that machine > with a user name of "user"? That's what the file paths are claiming. > > If so, my suggestion would be to navigate to the > c:\users\user directory, right click the "documents" icon (may > display as "my documents"), select Properties. > > Step 1: click the [] Read-only box until it is not shaded or > check-marked, then hit [Apply] and respond yes to all the following pop-ups. > > If TMG still gives the error, you may have to return to the > properties page and pick the Security tab, pick your user account, > and if you don't have all permissions, pick the [Edit] button... > Select the user account (again), then [X] the boxes in the allow > column (typically everything except the last "special" box need to be > selected). Note: this step may need to be performed on each layer of > files and directories. > > -- > bieber.genealogy@earthlink.net Dennis Lee Bieber > HTTP://home.earthlink.net/~bieber.genealogy/ > > The TMG archive is found here: http://archiver.rootsweb.ancestry.com/th/index/TMG/ > Instructions on how to subscribe to TMG: http://lists.rootsweb.ancestry.com/index/other/Software/TMG.html > ------------------------------- > To unsubscribe from the list, please send an email to TMG-request@rootsweb.com with the word 'unsubscribe' without the quotes in the subject and the body of the message

Hello fellow TMG users. I am hoping someone on the list can help me through a problem I've encountered in the last few days. I have the Gold UK edition, version 9.05, and I am also using Windows 10. When launching TMG I get a Program Error which says: File access is denied c:\users\user\documents\the master genealogist v9\log s\_programstartlog.log. The only way I can get the program to continue on is to select 'Ignore'. When the 'Welcome Window' appears I can select the last file used, but then I get the following error message: File access is denied c:\users\userdocuments\the master genealogist v9\logs\registercontrol.log. 13 TMGAPPOBJ.MOCX Again, if I select 'Ignore', the program proceeds to open my 'last file used'. However, from here on, I can't generate reports or perform a backup successfully. I have not attempted any data entry since this problem started, so I do not know if the error affects this. I have attempted to repair the program by running the program installer for v 9.5 (tmg9uksetup.exe) as an administrator. I've also uninstalled and reinstalled the program, but still get the same program error messages. I am really concerned about it! Please - would anyone have any ideas on what could be happening here and what to do to fix it? I would be very grateful for any help anyone can give. Regards, Jeanette Hartnack

On 8/15/2015 2:18 PM, Karla Huebner via wrote: > Can I add the friend projects to my family project (simplifying sourcing) > but keep them out of backups of the family dataset(s)? Karla, No. If you move the data set in your "friend" project to your family project it will be included in backups. Terry Reigel