If you make the microfilm the Master Source, then you enter it's details and the repository just the once for all 200 citations of it. Tom On 2012-12-19, at 8:36 PM, Teresa Elliott <cheasa@bellsouth.net> wrote: > You missed my point, i use more than one will or deed off the film and don't want to have to retype that information five or six times. Added to that I can add to do tasks to the repository, so I can add it to the films not the physical building. I may have two hundred census sources off one roll of microfilm. > > Teresa Elliott > > On Dec 19, 2012, at 7:05 PM, Alfred <adeller@santel.net> wrote: > >> In my opinion the micro film is the source and the building or office >> where it is found is the repository. >> >> Alfred >> =============== >> >> Teresa Elliott wrote: >>> In my old software, I used the repository for microfilm information, because >>> I only had to type in the information for a roll one time. But obviously the >>> predefined fields in Rootsmagic aren't large enough to hold this >>> information. I'd love a field where I could link a microfilm roll to a >>> source and have that print with the source, so I only had to enter this >>> information one time, since I tend to use the same microfilm over and over >>> for different sources. This also allowed me to attach research tasks to the >>> roll of microfilm. >>> >>> So here's my questions: >>> >>> Does the repository information print as part of the source output. My >>> GEDCOM put all the sources into a free form source template, and I can't >>> figure out how to edit those to another source type, other than creating a >>> new source and then merging the sources. >>> >>> If the repository information does print, does the repository note print as >>> part of the source output? I can continue to do what I am doing now, if I >>> just move the microfilm information into the note section of the repository, >>> if that prints. I am thinking I could just move my current text to the >>> repository note field and then just have [repository note] print where the >>> repository text should be. Note: I only use footnotes, never Bibliography >>> so this would work for me if the repository note prints. >>> >>> >>> Where is the best place to enter the information about the microfilm roll? >>> Preferably so that I don't have to type it over and over again. My family is >>> all from the same small area, so it's not unusual for me to find 5 or more >>> ancestors in the same will book or deed book. >> >> >> =================================== >> RM list Archives: http://archiver.rootsweb.com/th/index/ROOTSMAGIC-USERS/ >> http://archiver.rootsweb.com/cgi-bin/search?path=ROOTSMAGIC-USERS >> WISH LIST: http://www.rootsmagic.com/forums/ BLOG: http://blog.rootsmagic.com/ >> >> >> ------------------------------- >> To unsubscribe from the list, please send an email to ROOTSMAGIC-USERS-request@rootsweb.com with the word 'unsubscribe' without the quotes in the subject and the body of the message > > > > =================================== > RM list Archives: http://archiver.rootsweb.com/th/index/ROOTSMAGIC-USERS/ > http://archiver.rootsweb.com/cgi-bin/search?path=ROOTSMAGIC-USERS > WISH LIST: http://www.rootsmagic.com/forums/ BLOG: http://blog.rootsmagic.com/ > > > ------------------------------- > To unsubscribe from the list, please send an email to ROOTSMAGIC-USERS-request@rootsweb.com with the word 'unsubscribe' without the quotes in the subject and the body of the message

Bruce, I've never used the Chart program before, but I can enter boxes, links, etc. but it won't let me enter text. That is probably because I'm not doing it right. Is there a webinar about it that I can watch? pat On 12/19/2012 8:17 PM, RootsMagic wrote: > Those both use the wallcharting engine. Are you able to run the > RootsMagic Chart program directly from the start menu? > > - Bruce > http://www.rootsmagic.com > > > On Wed, Dec 19, 2012 at 7:14 PM, Patricia Rowbotham > <rr_farm@centurytel.net> wrote: >> The same thing is happening with the hourglass report. Shall I just >> give up on these Christmas gifts?? >> pat >> >> On 12/19/2012 8:06 PM, Patricia Rowbotham wrote: >>> Is anyone else having trouble printing a timeline? After I make all my >>> options, it appears to be proceeding and then the "Rootsmagic has >>> encountered an error..." pops up. I've tried several different >>> combinations of options and all do the same. >>> I'm using Win7, 4 GB RAM and RM 6.0.0.3 >>> Thanks for any suggestions, >>> Pat from balmy 65 degree Arkansas (except we are expecting snow flurries >>> in the morning -- go figure!) >>> >>> >>> >>> =================================== >>> RM list Archives: http://archiver.rootsweb.com/th/index/ROOTSMAGIC-USERS/ >>> http://archiver.rootsweb.com/cgi-bin/search?path=ROOTSMAGIC-USERS >>> WISH LIST: http://www.rootsmagic.com/forums/ BLOG: http://blog.rootsmagic.com/ >>> >>> >>> ------------------------------- >>> To unsubscribe from the list, please send an email to ROOTSMAGIC-USERS-request@rootsweb.com with the word 'unsubscribe' without the quotes in the subject and the body of the message >>> >>> >>> >>> ----- >>> No virus found in this message. >>> Checked by AVG - www.avg.com >>> Version: 2013.0.2805 / Virus Database: 2637/5970 - Release Date: 12/19/12 >>> >>> >> >> >> =================================== >> RM list Archives: http://archiver.rootsweb.com/th/index/ROOTSMAGIC-USERS/ >> http://archiver.rootsweb.com/cgi-bin/search?path=ROOTSMAGIC-USERS >> WISH LIST: http://www.rootsmagic.com/forums/ BLOG: http://blog.rootsmagic.com/ >> >> >> ------------------------------- >> To unsubscribe from the list, please send an email to ROOTSMAGIC-USERS-request@rootsweb.com with the word 'unsubscribe' without the quotes in the subject and the body of the message > > > =================================== > RM list Archives: http://archiver.rootsweb.com/th/index/ROOTSMAGIC-USERS/ > http://archiver.rootsweb.com/cgi-bin/search?path=ROOTSMAGIC-USERS > WISH LIST: http://www.rootsmagic.com/forums/ BLOG: http://blog.rootsmagic.com/ > > > ------------------------------- > To unsubscribe from the list, please send an email to ROOTSMAGIC-USERS-request@rootsweb.com with the word 'unsubscribe' without the quotes in the subject and the body of the message > > > > ----- > No virus found in this message. > Checked by AVG - www.avg.com > Version: 2013.0.2805 / Virus Database: 2637/5970 - Release Date: 12/19/12 > >

The same thing is happening with the hourglass report. Shall I just give up on these Christmas gifts?? pat On 12/19/2012 8:06 PM, Patricia Rowbotham wrote: > Is anyone else having trouble printing a timeline? After I make all my > options, it appears to be proceeding and then the "Rootsmagic has > encountered an error..." pops up. I've tried several different > combinations of options and all do the same. > I'm using Win7, 4 GB RAM and RM 6.0.0.3 > Thanks for any suggestions, > Pat from balmy 65 degree Arkansas (except we are expecting snow flurries > in the morning -- go figure!) > > > > =================================== > RM list Archives: http://archiver.rootsweb.com/th/index/ROOTSMAGIC-USERS/ > http://archiver.rootsweb.com/cgi-bin/search?path=ROOTSMAGIC-USERS > WISH LIST: http://www.rootsmagic.com/forums/ BLOG: http://blog.rootsmagic.com/ > > > ------------------------------- > To unsubscribe from the list, please send an email to ROOTSMAGIC-USERS-request@rootsweb.com with the word 'unsubscribe' without the quotes in the subject and the body of the message > > > > ----- > No virus found in this message. > Checked by AVG - www.avg.com > Version: 2013.0.2805 / Virus Database: 2637/5970 - Release Date: 12/19/12 > >

Tom, I understand that, however, that is not the way that I work. I prefer the will or deed (or head of household) to be the source. To me, the microfilm (or will book) is not the source, the deed or will is. I was hoping someone could offer a suggestion for a way to do something similar in Rootsmagic. Entering the deed book information over and over again is redundant. Computers are supposed to do the work for us. And making the deed book the source doesn't work for me either. Currently I have 3500 sources that would need to be edited. If I changed to what you are suggesting, they'd not only have to be edited, but merged with other sources and the cleanup would be a nightmare. -----Original Message----- From: rootsmagic-users-bounces@rootsweb.com [mailto:rootsmagic-users-bounces@rootsweb.com] On Behalf Of Tom Holden Sent: Wednesday, December 19, 2012 7:57 PM To: rootsmagic-users@rootsweb.com Subject: Re: [RMagic] Repository questions If you make the microfilm the Master Source, then you enter it's details and the repository just the once for all 200 citations of it. Tom On 2012-12-19, at 8:36 PM, Teresa Elliott <cheasa@bellsouth.net> wrote: > You missed my point, i use more than one will or deed off the film and don't want to have to retype that information five or six times. Added to that I can add to do tasks to the repository, so I can add it to the films not the physical building. I may have two hundred census sources off one roll of microfilm. > > Teresa Elliott > > On Dec 19, 2012, at 7:05 PM, Alfred <adeller@santel.net> wrote: > >> In my opinion the micro film is the source and the building or office >> where it is found is the repository. >> >> Alfred >> =============== >> >> Teresa Elliott wrote: >>> In my old software, I used the repository for microfilm information, >>> because I only had to type in the information for a roll one time. >>> But obviously the predefined fields in Rootsmagic aren't large >>> enough to hold this information. I'd love a field where I could link >>> a microfilm roll to a source and have that print with the source, so >>> I only had to enter this information one time, since I tend to use >>> the same microfilm over and over for different sources. This also >>> allowed me to attach research tasks to the roll of microfilm. >>> >>> So here's my questions: >>> >>> Does the repository information print as part of the source output. >>> My GEDCOM put all the sources into a free form source template, and >>> I can't figure out how to edit those to another source type, other >>> than creating a new source and then merging the sources. >>> >>> If the repository information does print, does the repository note >>> print as part of the source output? I can continue to do what I am >>> doing now, if I just move the microfilm information into the note >>> section of the repository, if that prints. I am thinking I could >>> just move my current text to the repository note field and then just >>> have [repository note] print where the repository text should be. >>> Note: I only use footnotes, never Bibliography so this would work for me if the repository note prints. >>> >>> >>> Where is the best place to enter the information about the microfilm roll? >>> Preferably so that I don't have to type it over and over again. My >>> family is all from the same small area, so it's not unusual for me >>> to find 5 or more ancestors in the same will book or deed book. >> >> >> =================================== >> RM list Archives: >> http://archiver.rootsweb.com/th/index/ROOTSMAGIC-USERS/ >> http://archiver.rootsweb.com/cgi-bin/search?path=ROOTSMAGIC-USERS >> WISH LIST: http://www.rootsmagic.com/forums/ BLOG: >> http://blog.rootsmagic.com/ >> >> >> ------------------------------- >> To unsubscribe from the list, please send an email to >> ROOTSMAGIC-USERS-request@rootsweb.com with the word 'unsubscribe' >> without the quotes in the subject and the body of the message > > > > =================================== > RM list Archives: > http://archiver.rootsweb.com/th/index/ROOTSMAGIC-USERS/ > http://archiver.rootsweb.com/cgi-bin/search?path=ROOTSMAGIC-USERS > WISH LIST: http://www.rootsmagic.com/forums/ BLOG: > http://blog.rootsmagic.com/ > > > ------------------------------- > To unsubscribe from the list, please send an email to > ROOTSMAGIC-USERS-request@rootsweb.com with the word 'unsubscribe' > without the quotes in the subject and the body of the message =================================== RM list Archives: http://archiver.rootsweb.com/th/index/ROOTSMAGIC-USERS/ http://archiver.rootsweb.com/cgi-bin/search?path=ROOTSMAGIC-USERS WISH LIST: http://www.rootsmagic.com/forums/ BLOG: http://blog.rootsmagic.com/ ------------------------------- To unsubscribe from the list, please send an email to ROOTSMAGIC-USERS-request@rootsweb.com with the word 'unsubscribe' without the quotes in the subject and the body of the message

Is anyone else having trouble printing a timeline? After I make all my options, it appears to be proceeding and then the "Rootsmagic has encountered an error..." pops up. I've tried several different combinations of options and all do the same. I'm using Win7, 4 GB RAM and RM 6.0.0.3 Thanks for any suggestions, Pat from balmy 65 degree Arkansas (except we are expecting snow flurries in the morning -- go figure!)

You missed my point, i use more than one will or deed off the film and don't want to have to retype that information five or six times. Added to that I can add to do tasks to the repository, so I can add it to the films not the physical building. I may have two hundred census sources off one roll of microfilm. Teresa Elliott On Dec 19, 2012, at 7:05 PM, Alfred <adeller@santel.net> wrote: > In my opinion the micro film is the source and the building or office > where it is found is the repository. > > Alfred > =============== > > Teresa Elliott wrote: >> In my old software, I used the repository for microfilm information, because >> I only had to type in the information for a roll one time. But obviously the >> predefined fields in Rootsmagic aren't large enough to hold this >> information. I'd love a field where I could link a microfilm roll to a >> source and have that print with the source, so I only had to enter this >> information one time, since I tend to use the same microfilm over and over >> for different sources. This also allowed me to attach research tasks to the >> roll of microfilm. >> >> So here's my questions: >> >> Does the repository information print as part of the source output. My >> GEDCOM put all the sources into a free form source template, and I can't >> figure out how to edit those to another source type, other than creating a >> new source and then merging the sources. >> >> If the repository information does print, does the repository note print as >> part of the source output? I can continue to do what I am doing now, if I >> just move the microfilm information into the note section of the repository, >> if that prints. I am thinking I could just move my current text to the >> repository note field and then just have [repository note] print where the >> repository text should be. Note: I only use footnotes, never Bibliography >> so this would work for me if the repository note prints. >> >> >> Where is the best place to enter the information about the microfilm roll? >> Preferably so that I don't have to type it over and over again. My family is >> all from the same small area, so it's not unusual for me to find 5 or more >> ancestors in the same will book or deed book. > > > =================================== > RM list Archives: http://archiver.rootsweb.com/th/index/ROOTSMAGIC-USERS/ > http://archiver.rootsweb.com/cgi-bin/search?path=ROOTSMAGIC-USERS > WISH LIST: http://www.rootsmagic.com/forums/ BLOG: http://blog.rootsmagic.com/ > > > ------------------------------- > To unsubscribe from the list, please send an email to ROOTSMAGIC-USERS-request@rootsweb.com with the word 'unsubscribe' without the quotes in the subject and the body of the message

Those both use the wallcharting engine. Are you able to run the RootsMagic Chart program directly from the start menu? - Bruce http://www.rootsmagic.com On Wed, Dec 19, 2012 at 7:14 PM, Patricia Rowbotham <rr_farm@centurytel.net> wrote: > The same thing is happening with the hourglass report. Shall I just > give up on these Christmas gifts?? > pat > > On 12/19/2012 8:06 PM, Patricia Rowbotham wrote: >> Is anyone else having trouble printing a timeline? After I make all my >> options, it appears to be proceeding and then the "Rootsmagic has >> encountered an error..." pops up. I've tried several different >> combinations of options and all do the same. >> I'm using Win7, 4 GB RAM and RM 6.0.0.3 >> Thanks for any suggestions, >> Pat from balmy 65 degree Arkansas (except we are expecting snow flurries >> in the morning -- go figure!) >> >> >> >> =================================== >> RM list Archives: http://archiver.rootsweb.com/th/index/ROOTSMAGIC-USERS/ >> http://archiver.rootsweb.com/cgi-bin/search?path=ROOTSMAGIC-USERS >> WISH LIST: http://www.rootsmagic.com/forums/ BLOG: http://blog.rootsmagic.com/ >> >> >> ------------------------------- >> To unsubscribe from the list, please send an email to ROOTSMAGIC-USERS-request@rootsweb.com with the word 'unsubscribe' without the quotes in the subject and the body of the message >> >> >> >> ----- >> No virus found in this message. >> Checked by AVG - www.avg.com >> Version: 2013.0.2805 / Virus Database: 2637/5970 - Release Date: 12/19/12 >> >> > > > =================================== > RM list Archives: http://archiver.rootsweb.com/th/index/ROOTSMAGIC-USERS/ > http://archiver.rootsweb.com/cgi-bin/search?path=ROOTSMAGIC-USERS > WISH LIST: http://www.rootsmagic.com/forums/ BLOG: http://blog.rootsmagic.com/ > > > ------------------------------- > To unsubscribe from the list, please send an email to ROOTSMAGIC-USERS-request@rootsweb.com with the word 'unsubscribe' without the quotes in the subject and the body of the message

In my opinion the micro film is the source and the building or office where it is found is the repository. Alfred =============== Teresa Elliott wrote: > In my old software, I used the repository for microfilm information, because > I only had to type in the information for a roll one time. But obviously the > predefined fields in Rootsmagic aren't large enough to hold this > information. I'd love a field where I could link a microfilm roll to a > source and have that print with the source, so I only had to enter this > information one time, since I tend to use the same microfilm over and over > for different sources. This also allowed me to attach research tasks to the > roll of microfilm. > > So here's my questions: > > Does the repository information print as part of the source output. My > GEDCOM put all the sources into a free form source template, and I can't > figure out how to edit those to another source type, other than creating a > new source and then merging the sources. > > If the repository information does print, does the repository note print as > part of the source output? I can continue to do what I am doing now, if I > just move the microfilm information into the note section of the repository, > if that prints. I am thinking I could just move my current text to the > repository note field and then just have [repository note] print where the > repository text should be. Note: I only use footnotes, never Bibliography > so this would work for me if the repository note prints. > > > Where is the best place to enter the information about the microfilm roll? > Preferably so that I don't have to type it over and over again. My family is > all from the same small area, so it's not unusual for me to find 5 or more > ancestors in the same will book or deed book. > >

In my old software, I used the repository for microfilm information, because I only had to type in the information for a roll one time. But obviously the predefined fields in Rootsmagic aren't large enough to hold this information. I'd love a field where I could link a microfilm roll to a source and have that print with the source, so I only had to enter this information one time, since I tend to use the same microfilm over and over for different sources. This also allowed me to attach research tasks to the roll of microfilm. So here's my questions: Does the repository information print as part of the source output. My GEDCOM put all the sources into a free form source template, and I can't figure out how to edit those to another source type, other than creating a new source and then merging the sources. If the repository information does print, does the repository note print as part of the source output? I can continue to do what I am doing now, if I just move the microfilm information into the note section of the repository, if that prints. I am thinking I could just move my current text to the repository note field and then just have [repository note] print where the repository text should be. Note: I only use footnotes, never Bibliography so this would work for me if the repository note prints. Where is the best place to enter the information about the microfilm roll? Preferably so that I don't have to type it over and over again. My family is all from the same small area, so it's not unusual for me to find 5 or more ancestors in the same will book or deed book.

It doesn't rotate on the smaller screens. Won't on my iPod touch either. *Anne Kruszka Yesterday is history, tomorrow is mystery, today is a gift. [Eleanor Roosevelt]* http://geneanotes.blogspot.com http://tennlady-generational.blogspot.com/ On 12/19/2012 8:26 AM, akins@ksu.edu wrote: > I have downloaded this App and am grateful to Bruce for supplying it. I have two > small problems which may be the App or, perhaps, something in my iPhone 4S. > First, I can't get the screen to rotate to the landscape position and, second, the pictures > for the persons in the tree seem to be distorted slightly. They are wider than the actual > pictures. > > Dick > > > =================================== > RM list Archives: http://archiver.rootsweb.com/th/index/ROOTSMAGIC-USERS/ > http://archiver.rootsweb.com/cgi-bin/search?path=ROOTSMAGIC-USERS > WISH LIST: http://www.rootsmagic.com/forums/ BLOG: http://blog.rootsmagic.com/ > > > ------------------------------- > To unsubscribe from the list, please send an email to ROOTSMAGIC-USERS-request@rootsweb.com with the word 'unsubscribe' without the quotes in the subject and the body of the message >

I have downloaded this App and am grateful to Bruce for supplying it. I have two small problems which may be the App or, perhaps, something in my iPhone 4S. First, I can't get the screen to rotate to the landscape position and, second, the pictures for the persons in the tree seem to be distorted slightly. They are wider than the actual pictures. Dick

I am getting a new computer and thought I would just put RM6 directly there. Will I have a problem using the back up to install my data into the RM 6 if I don't have RM 5 on the new machine?

I don't know what went wrong, Patricia. The app downloads the file to your iPad from Dropbox and does not need Internet access after that until you need to sync again. Tom On 2012-12-18, at 8:19 PM, P Summers-Smith <summerspa@comcast.net> wrote: > Thanks, Tom. I ran the tools as you suggested in the order you > suggested. It checked out with integrity ok. While I was doing that, > my attention was diverted from the iPad and what it was doing (having > last received an error message). After seeing everything okay, I > copied the database to overwrite the one in Dropbox on my desktop. > The unattended RM was still open on the iPad and the RM APP on my > iPad had opened the database file. I closed the app and reopened it. > RM said the file had been changed and did I want to resync it. I said yes. > > New problem now. Now I get a different error message: > "Error in Loading Files. The operation couldn't be completed. > (NSURLErrorDomain error - 1001). > {"/var.mobile/Applications/FC2B6382-9B0C-4FF6-B50E-D05DB6007CA5/Documents/6_Master8.rmgc"; > path = "6_Master8.rmgc";} " ???? What's going on with that? > > Okay, then when I closed and opened again, it asked me again if I > wanted to sync. I said yes and this time it completed the sync > process with no problem at all. So, I think everything is good now. > > A general question though: Is the file that opens on the iPad the > same one that's still IN the Dropbox? Or did Dropbox download a COPY > to my iPad and that is the file I'm opening? Will the APP only work > if I'm within WI-FI access so it can access my dropbox files? > > Patricia > > > At 04:19 PM 12/18/2012, you wrote: >> Maybe you are doing nothing wrong. I put a 220 MB file through >> Dropbox in the beta test. I wonder if the message is wrong and that >> the problem is a corruption in your database. Try running through >> the Database Tools: Integrity, Rebuild Indexes, Integrity (ok?), >> Clean, Compact then put your file up on Dropbox. >> >> Tom > > > > =================================== > RM list Archives: http://archiver.rootsweb.com/th/index/ROOTSMAGIC-USERS/ > http://archiver.rootsweb.com/cgi-bin/search?path=ROOTSMAGIC-USERS > WISH LIST: http://www.rootsmagic.com/forums/ BLOG: http://blog.rootsmagic.com/ > > > ------------------------------- > To unsubscribe from the list, please send an email to ROOTSMAGIC-USERS-request@rootsweb.com with the word 'unsubscribe' without the quotes in the subject and the body of the message

I just did this site. Unfortunately I did not load all my names. Have to do it over. http://freepages.genealogy.rootsweb.ancestry.com/~jdavis/ Jess Davis From: Tom Holden Sent: Sunday, December 02, 2012 7:46 AM To: rootsmagic-users@rootsweb.com Subject: Re: [RMagic] RM6 Website HTML sample Hmm, I think you meant the static HTML website that Create HTML Pages produces. Here's one. http://www.mcgregor-mills.ca/ You can find more by searching on the phrase at the bottom. Tom On 2012-12-02, at 7:39 AM, Tom Holden <ve3meo@gmail.com> wrote: > This one was posted in the Forum. http://freepages.rootsweb.ancestry.com/~kmills/index.html > > She customized the one static page, index.html. > > Tom > > > > On 2012-12-02, at 12:58 AM, LB <lingbro@family-quest.com> wrote: > >> Could someone share their online website using the RM6 Online Publish >> feature that was uploaded to another domain other than Myrootsmagic.com, >> using the HTML file? >> >> I have viewed the sample and a few others that were uploaded and shared >> with us at myrootsmagic.com and they look really great. I would like >> to view the HTML version that has been uploaded to another website, that >> Tom and Alfred are referring to, for comparison. >> >> As folks know, building and restructuring a website can take a lot of >> time, work and planning. I just want to get my ducks in a row before >> starting this new project. Currently, I am using a good PHP freeie that >> works quite well for the price and was looking at TNG, before RM6 came >> out. I really like the appearance of RM's Publishing. Very attractive >> and pleasing to the eye. >> >> Perhaps I can do a redirect? >> >> Lynn B. >> >> >> >> =================================== >> RM list Archives: http://archiver.rootsweb.com/th/index/ROOTSMAGIC-USERS/ >> http://archiver.rootsweb.com/cgi-bin/search?path=ROOTSMAGIC-USERS >> WISH LIST: http://www.rootsmagic.com/forums/ BLOG: http://blog.rootsmagic.com/ >> >> >> ------------------------------- >> To unsubscribe from the list, please send an email to ROOTSMAGIC-USERS-request@rootsweb.com with the word 'unsubscribe' without the quotes in the subject and the body of the message =================================== RM list Archives: http://archiver.rootsweb.com/th/index/ROOTSMAGIC-USERS/ http://archiver.rootsweb.com/cgi-bin/search?path=ROOTSMAGIC-USERS WISH LIST: http://www.rootsmagic.com/forums/ BLOG: http://blog.rootsmagic.com/ ------------------------------- To unsubscribe from the list, please send an email to ROOTSMAGIC-USERS-request@rootsweb.com with the word 'unsubscribe' without the quotes in the subject and the body of the message ----- No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.2793 / Virus Database: 2634/5931 - Release Date: 12/01/12

Very nice 0 Thank you for sharing. Lynn B. On 12/18/2012 6:12 PM, Jesse Davis wrote: > I just did this site. Unfortunately I did not load all my names. Have to do it over. > http://freepages.genealogy.rootsweb.ancestry.com/~jdavis/ > Jess Davis > > > From: Tom Holden > Sent: Sunday, December 02, 2012 7:46 AM > To: rootsmagic-users@rootsweb.com > Subject: Re: [RMagic] RM6 Website HTML sample > > Hmm, I think you meant the static HTML website that Create HTML Pages produces. Here's one. > http://www.mcgregor-mills.ca/ > You can find more by searching on the phrase at the bottom. > > Tom > > > > On 2012-12-02, at 7:39 AM, Tom Holden <ve3meo@gmail.com> wrote: > >> This one was posted in the Forum. http://freepages.rootsweb.ancestry.com/~kmills/index.html >> >> She customized the one static page, index.html. >> >> Tom >> >> >> >> On 2012-12-02, at 12:58 AM, LB <lingbro@family-quest.com> wrote: >> >>> Could someone share their online website using the RM6 Online Publish >>> feature that was uploaded to another domain other than Myrootsmagic.com, >>> using the HTML file? >>> >>> I have viewed the sample and a few others that were uploaded and shared >>> with us at myrootsmagic.com and they look really great. I would like >>> to view the HTML version that has been uploaded to another website, that >>> Tom and Alfred are referring to, for comparison. >>> >>> As folks know, building and restructuring a website can take a lot of >>> time, work and planning. I just want to get my ducks in a row before >>> starting this new project. Currently, I am using a good PHP freeie that >>> works quite well for the price and was looking at TNG, before RM6 came >>> out. I really like the appearance of RM's Publishing. Very attractive >>> and pleasing to the eye. >>> >>> Perhaps I can do a redirect? >>> >>> Lynn B. >>> >>> >>> >>> =================================== >>> RM list Archives: http://archiver.rootsweb.com/th/index/ROOTSMAGIC-USERS/ >>> http://archiver.rootsweb.com/cgi-bin/search?path=ROOTSMAGIC-USERS >>> WISH LIST: http://www.rootsmagic.com/forums/ BLOG: http://blog.rootsmagic.com/ >>> >>> >>> ------------------------------- >>> To unsubscribe from the list, please send an email to ROOTSMAGIC-USERS-request@rootsweb.com with the word 'unsubscribe' without the quotes in the subject and the body of the message > > > =================================== > RM list Archives: http://archiver.rootsweb.com/th/index/ROOTSMAGIC-USERS/ > http://archiver.rootsweb.com/cgi-bin/search?path=ROOTSMAGIC-USERS > WISH LIST: http://www.rootsmagic.com/forums/ BLOG: http://blog.rootsmagic.com/ > > > ------------------------------- > To unsubscribe from the list, please send an email to ROOTSMAGIC-USERS-request@rootsweb.com with the word 'unsubscribe' without the quotes in the subject and the body of the message > > > ----- > No virus found in this message. > Checked by AVG - www.avg.com > Version: 2013.0.2793 / Virus Database: 2634/5931 - Release Date: 12/01/12 > > > =================================== > RM list Archives: http://archiver.rootsweb.com/th/index/ROOTSMAGIC-USERS/ > http://archiver.rootsweb.com/cgi-bin/search?path=ROOTSMAGIC-USERS > WISH LIST: http://www.rootsmagic.com/forums/ BLOG: http://blog.rootsmagic.com/ > > > ------------------------------- > To unsubscribe from the list, please send an email to ROOTSMAGIC-USERS-request@rootsweb.com with the word 'unsubscribe' without the quotes in the subject and the body of the message >

Maybe you are doing nothing wrong. I put a 220 MB file through Dropbox in the beta test. I wonder if the message is wrong and that the problem is a corruption in your database. Try running through the Database Tools: Integrity, Rebuild Indexes, Integrity (ok?), Clean, Compact then put your file up on Dropbox. Tom On 2012-12-18, at 7:06 PM, P Summers-Smith <summerspa@comcast.net> wrote: > > I'm having a problem getting the app to open and download the data to my iPad. > > App installed okay. I already had Dropbox installed. For the longest > time and many trys, when I opened the app and selected the Dropbox > tab, nothing would happen. The instruction menu would remain on the > screen. I finally copied my RM6 database file into the correct APPS > > RootsMagic folder in Dropbox. > > The app would finally recognize the database (67,332 kb). When I > select it, the app tells me to stay on the page until the download is > complete. Then it tries a long time to download it. Every time, I > finally get an error message that says to check my Internet > connection. But my internet connection is fine. I've tried numerous > times, but always wind up with the same error message. > > Any ideas as to what I might be doing wrong? > > Thanks, > Patricia > > > > =================================== > RM list Archives: http://archiver.rootsweb.com/th/index/ROOTSMAGIC-USERS/ > http://archiver.rootsweb.com/cgi-bin/search?path=ROOTSMAGIC-USERS > WISH LIST: http://www.rootsmagic.com/forums/ BLOG: http://blog.rootsmagic.com/ > > > ------------------------------- > To unsubscribe from the list, please send an email to ROOTSMAGIC-USERS-request@rootsweb.com with the word 'unsubscribe' without the quotes in the subject and the body of the message

Thanks, Tom. I ran the tools as you suggested in the order you suggested. It checked out with integrity ok. While I was doing that, my attention was diverted from the iPad and what it was doing (having last received an error message). After seeing everything okay, I copied the database to overwrite the one in Dropbox on my desktop. The unattended RM was still open on the iPad and the RM APP on my iPad had opened the database file. I closed the app and reopened it. RM said the file had been changed and did I want to resync it. I said yes. New problem now. Now I get a different error message: "Error in Loading Files. The operation couldn't be completed. (NSURLErrorDomain error - 1001). {"/var.mobile/Applications/FC2B6382-9B0C-4FF6-B50E-D05DB6007CA5/Documents/6_Master8.rmgc"; path = "6_Master8.rmgc";} " ???? What's going on with that? Okay, then when I closed and opened again, it asked me again if I wanted to sync. I said yes and this time it completed the sync process with no problem at all. So, I think everything is good now. A general question though: Is the file that opens on the iPad the same one that's still IN the Dropbox? Or did Dropbox download a COPY to my iPad and that is the file I'm opening? Will the APP only work if I'm within WI-FI access so it can access my dropbox files? Patricia At 04:19 PM 12/18/2012, you wrote: >Maybe you are doing nothing wrong. I put a 220 MB file through >Dropbox in the beta test. I wonder if the message is wrong and that >the problem is a corruption in your database. Try running through >the Database Tools: Integrity, Rebuild Indexes, Integrity (ok?), >Clean, Compact then put your file up on Dropbox. > >Tom

I'm having a problem getting the app to open and download the data to my iPad. App installed okay. I already had Dropbox installed. For the longest time and many trys, when I opened the app and selected the Dropbox tab, nothing would happen. The instruction menu would remain on the screen. I finally copied my RM6 database file into the correct APPS > RootsMagic folder in Dropbox. The app would finally recognize the database (67,332 kb). When I select it, the app tells me to stay on the page until the download is complete. Then it tries a long time to download it. Every time, I finally get an error message that says to check my Internet connection. But my internet connection is fine. I've tried numerous times, but always wind up with the same error message. Any ideas as to what I might be doing wrong? Thanks, Patricia

Use the Windows Task Manager (Ctrl-Alt-Del) to end the program or Shutdown/Restart Windows. When you have the database reopened, use the File > Database Tools tools to Check Integrity, Rebuild Indexes, Check Integrity; then if integrity OK, Clean and Compact, in that order. If integrity is OK at the outset, then it's unlikely the error caused any corruption of the database or was caused by corruption and you are safe to proceed to use it. But there is no harm and it will possibly do some good to go through the rest of the tools. Tom -----Original Message----- From: Imogean Sent: Tuesday, December 18, 2012 12:41 PM To: rootsmagic-users@rootsweb.com Subject: [RMagic] RM6 Error All of a sudden I can’t do anything with RM6. The error message is: RootsMagic6 Access violation at address 0052D9F2 in module RootsMagic.exe. Read of address 00003FF0 I can’t close the program or anything. It happened when I was doing a find search. It had worked ok all morning. Imogean M. McDonald =================================== RM list Archives: http://archiver.rootsweb.com/th/index/ROOTSMAGIC-USERS/ http://archiver.rootsweb.com/cgi-bin/search?path=ROOTSMAGIC-USERS WISH LIST: http://www.rootsmagic.com/forums/ BLOG: http://blog.rootsmagic.com/ ------------------------------- To unsubscribe from the list, please send an email to ROOTSMAGIC-USERS-request@rootsweb.com with the word 'unsubscribe' without the quotes in the subject and the body of the message

All of a sudden I can’t do anything with RM6. The error message is: RootsMagic6 Access violation at address 0052D9F2 in module RootsMagic.exe. Read of address 00003FF0 I can’t close the program or anything. It happened when I was doing a find search. It had worked ok all morning. Imogean M. McDonald