Aren't the SAR and DAR records blocked from saving? Mary On 3/3/2015 3:41 PM, David Abernathy via wrote: > John, > I have not found any images being blocked using IE. > > Can you provide a link to an image the is blocked to you? > > Thanks, > David C Abernathy > Email disclaimers > ---------------------------------------------------------------------------- > This message represents the official view of the voices in my head. > ---------------------------------------------------------------------------- > http://www.SchmeckAbernathy.com > == All outgoing and incoming mail is scanned by F-Prot Antivirus == > > -----Original Message----- > From: ftm-tech-bounces@rootsweb.com [mailto:ftm-tech-bounces@rootsweb.com] > On Behalf Of John Yates via > Sent: Tuesday, March 03, 2015 12:28 PM > To: ftm-tech@rootsweb.com > Subject: Re: [FTM-TECH] FTM 3 22.2.4.781 lost feature > > David, > > My experiments show that they have disabled the right-click save image as... > > And thus my surprise. I'm not sure how they did that in Firefox, but that is > what I've seen. Programmatically, I'm sure it is possible, and that's what > they've done. > > Wouldn't it be nice if it showed the message: > > "Downloads are not permitted for this file. Contact <THEM> to purchase a > copy...". Or something like it. This would have saved us all a lot of time > wouldn't it! A programmer could have done that in under > 5 minutes. I take that back. A good programmer could have done that in under > 5 minutes. > > John > > On 3/3/2015 2:04 PM, David Abernathy wrote: >> John, >> I am NOT a Mac user. >> >> I think the issue is that things were changed at Ancestry. I even with >> my Windows version have the same issue that you are having with then >> Mac version. >> There is this same issue when just browsing Ancestry using one's >> browser. So it is an issue with Ancestry.com not FTM. >> >> When you are on the internet using your normal browser, how do you >> save an image to your computer? >> On a windows system using IE, all one needs to do is Right click the >> image and select "Save Picture as", and one is given the File Save >> pane, which one can change the location, names and a few other options >> before the save is made. >> >> If you were to do the same thing within FTM Mac 3 version while >> viewing the image that you want to save to your local machine, it should > work. >> >> Thanks, >> David C Abernathy >> Email disclaimers >> ---------------------------------------------------------------------- >> ------ This message represents the official view of the voices in my >> head. >> ---------------------------------------------------------------------- >> ------ >> http://www.SchmeckAbernathy.com >> == All outgoing and incoming mail is scanned by F-Prot Antivirus == >> >> >> -----Original Message----- >> From: ftm-tech-bounces@rootsweb.com >> [mailto:ftm-tech-bounces@rootsweb.com] >> On Behalf Of John Yates via >> Sent: Tuesday, March 03, 2015 8:15 AM >> To: ftm-tech@rootsweb.com >> Subject: Re: [FTM-TECH] FTM 3 22.2.4.781 lost feature >> >> All I know is that I have until this latest FTM Mac 3 version been >> able to save a record image to my computer in a LOCAL DISK FILE. It >> may have been with right-click save image. But even that is missing, >> or when it does appear it saves an empty or corrupted file. >> >> I saved the image to shoebox. Shoebox is not described in the FTM >> Manual. I googled and it seems it is only available on ancesty.com . >> I went there. Found shoebox at the bottom of the page. I clicked on >> the record I want to save TO MY COMPUTER. >> >> First, I clicked on VIEW. The SAVE button merely offers that it is in >> my shoebox, and the other option is to SAVE TO PERSON IN MY TREE. >> This is the ONLINE TREE where it is useless to me. >> >> Second, I click on VIEW. There is the image I want to download to A >> FILE ON MY COMPUTER. >> >> I click on SAVE. It offers that it is in my shoebox or I can save it >> to a person in my tree. No good for me. >> >> Then I right-clicked. Save Image As... displays (an is probably the >> way I got these before). However, Ancestry has done something to >> prevent the actual image from saving. It is a garbage, empty file. >> I tried using Firefox and Chrome browsers. Same nonsense. >> >> Now, would someone care to tell me where the "Save to Computer" >> option went, and when it will be back? >> >> (I've cc-ed this one to Ancestry Support). >> >> John >> >> On 3/3/2015 8:06 AM, H R Worthington wrote: >>> John, >>> >>> Save to computer has not been with us since FTM2008 and the first Mac >>> version >>> >>> As I said before, Save to Computer or Save to Shoebox is from the Web >> Site. >>> I didn't say anything about online trees. >>> >>> Go to the record you want, and you will see the Shoebox or Save to >>> Computer option. >>> >>> Russ >>> ___________________________ >>> >>> Mailto:rworthington@att.net >>> >>> --------------------------------------------------------------------- >>> - >>> -- >>> *From:* John Yates via <ftm-tech@rootsweb.com> >>> *To:* "ftm-tech@rootsweb.com" <ftm-tech@rootsweb.com> >>> *Sent:* Tuesday, March 3, 2015 1:51 AM >>> *Subject:* Re: [FTM-TECH] FTM 3 22.2.4.781 lost feature >>> >>> No, "Save to Computer" is not in the latest version of FTM 3. >>> >>> Why not? >>> >>> I have no use for on line trees. >>> >>> John >>> >>> >>> >>> On 3/2/2015 10:42 PM, H R Worthington wrote: >>> > John, >>> > >>> > Those features are on the WEb Site and in FTM-3. >>> > >>> > Russ >>> > ___________________________ >>> > >>> > Mailto:rworthington@att.net <mailto:rworthington@att.net> > > >>> --------------------------------------------------------------------- >>> - >>> -- > *From:* John Yates via <ftm-tech@rootsweb.com >>> <mailto:ftm-tech@rootsweb.com>> > *To:* "ftm-tech@rootsweb.com >>> <mailto:ftm-tech@rootsweb.com>" >>> <ftm-tech@rootsweb.com <mailto:ftm-tech@rootsweb.com>> > *Sent:* >>> Monday, March 2, 2015 9:33 PM > *Subject:* [FTM-TECH] FTM 3 >>> 22.2.4.781 lost feature > > Where is "Save to Computer" in Web >>> Search -> Save ? >>> > All I get is: >>> > Save to person in your tree >>> > Save to my shoebox >>> ********************************** >>> List information page >>> http://lists.rootsweb.com/index/other/Software/FTM-TECH.html >>> >>> ------------------------------- >>> To unsubscribe from the list, please send an email to >>> FTM-TECH-request@rootsweb.com <mailto:FTM-TECH-request@rootsweb.com> >>> with the word 'unsubscribe' without the quotes in the subject and the >>> body of the message >>> >>> >> ********************************** >> List information page >> http://lists.rootsweb.com/index/other/Software/FTM-TECH.html >> >> ------------------------------- >> To unsubscribe from the list, please send an email to >> FTM-TECH-request@rootsweb.com with the word 'unsubscribe' without the >> quotes in the subject and the body of the message >> > ********************************** > List information page > http://lists.rootsweb.com/index/other/Software/FTM-TECH.html > > ------------------------------- > To unsubscribe from the list, please send an email to > FTM-TECH-request@rootsweb.com with the word 'unsubscribe' without the quotes > in the subject and the body of the message > > > ********************************** > List information page > http://lists.rootsweb.com/index/other/Software/FTM-TECH.html > > ------------------------------- > To unsubscribe from the list, please send an email to FTM-TECH-request@rootsweb.com with the word 'unsubscribe' without the quotes in the subject and the body of the message > -- If you don't know your family history, you are a leaf that doesn't know it is part of a tree. ~ Michael Crichton ~ Mary W. Ellis http://homepages.rootsweb.com/~mwellis/ http://www.rootsweb.com/~ncacgs/

If you can't right click and save use the snipping tool to clip and save a copy. This works for me. Mary Ellis On 3/3/2015 3:28 PM, John Yates via wrote: > David, > > My experiments show that they have disabled the right-click save image > as... > > And thus my surprise. I'm not sure how they did that in Firefox, > but that is what I've seen. Programmatically, I'm sure it is possible, > and that's what they've done. > > Wouldn't it be nice if it showed the message: > > "Downloads are not permitted for this file. Contact <THEM> to purchase > a copy...". Or something like it. This would have saved us all a lot > of time wouldn't it! A programmer could have done that in under > 5 minutes. I take that back. A good programmer could have done that > in under 5 minutes. > > John > > On 3/3/2015 2:04 PM, David Abernathy wrote: >> John, >> I am NOT a Mac user. >> >> I think the issue is that things were changed at Ancestry. I even with my >> Windows version have the same issue that you are having with then Mac >> version. >> There is this same issue when just browsing Ancestry using one's browser. So >> it is an issue with Ancestry.com not FTM. >> >> When you are on the internet using your normal browser, how do you save an >> image to your computer? >> On a windows system using IE, all one needs to do is Right click the image >> and select "Save Picture as", and one is given the File Save pane, which one >> can change the location, names and a few other options before the save is >> made. >> >> If you were to do the same thing within FTM Mac 3 version while viewing the >> image that you want to save to your local machine, it should work. >> >> >> Thanks, >> David C Abernathy >> Email disclaimers >> ---------------------------------------------------------------------------- >> This message represents the official view of the voices in my head. >> ---------------------------------------------------------------------------- >> http://www.SchmeckAbernathy.com >> == All outgoing and incoming mail is scanned by F-Prot Antivirus == >> >> >> -----Original Message----- >> From: ftm-tech-bounces@rootsweb.com [mailto:ftm-tech-bounces@rootsweb.com] >> On Behalf Of John Yates via >> Sent: Tuesday, March 03, 2015 8:15 AM >> To: ftm-tech@rootsweb.com >> Subject: Re: [FTM-TECH] FTM 3 22.2.4.781 lost feature >> >> All I know is that I have until this latest FTM Mac 3 version been able to >> save a record image to my computer in a LOCAL DISK FILE. It may have been >> with right-click save image. But even that is missing, or when it does >> appear it saves an empty or corrupted file. >> >> I saved the image to shoebox. Shoebox is not described in the FTM Manual. I >> googled and it seems it is only available on ancesty.com . >> I went there. Found shoebox at the bottom of the page. I clicked on the >> record I want to save TO MY COMPUTER. >> >> First, I clicked on VIEW. The SAVE button merely offers that it is in my >> shoebox, and the other option is to SAVE TO PERSON IN MY TREE. >> This is the ONLINE TREE where it is useless to me. >> >> Second, I click on VIEW. There is the image I want to download to A FILE ON >> MY COMPUTER. >> >> I click on SAVE. It offers that it is in my shoebox or I can save it to a >> person in my tree. No good for me. >> >> Then I right-clicked. Save Image As... displays (an is probably the way I >> got these before). However, Ancestry has done something to prevent the >> actual image from saving. It is a garbage, empty file. >> I tried using Firefox and Chrome browsers. Same nonsense. >> >> Now, would someone care to tell me where the "Save to Computer" >> option went, and when it will be back? >> >> (I've cc-ed this one to Ancestry Support). >> >> John >> >> On 3/3/2015 8:06 AM, H R Worthington wrote: >>> John, >>> >>> Save to computer has not been with us since FTM2008 and the first Mac >>> version >>> >>> As I said before, Save to Computer or Save to Shoebox is from the Web >> Site. >>> I didn't say anything about online trees. >>> >>> Go to the record you want, and you will see the Shoebox or Save to >>> Computer option. >>> >>> Russ >>> ___________________________ >>> >>> Mailto:rworthington@att.net >>> >>> ---------------------------------------------------------------------- >>> -- >>> *From:* John Yates via <ftm-tech@rootsweb.com> >>> *To:* "ftm-tech@rootsweb.com" <ftm-tech@rootsweb.com> >>> *Sent:* Tuesday, March 3, 2015 1:51 AM >>> *Subject:* Re: [FTM-TECH] FTM 3 22.2.4.781 lost feature >>> >>> No, "Save to Computer" is not in the latest version of FTM 3. >>> >>> Why not? >>> >>> I have no use for on line trees. >>> >>> John >>> >>> >>> >>> On 3/2/2015 10:42 PM, H R Worthington wrote: >>> > John, >>> > >>> > Those features are on the WEb Site and in FTM-3. >>> > >>> > Russ >>> > ___________________________ >>> > >>> > Mailto:rworthington@att.net <mailto:rworthington@att.net> > > >>> ---------------------------------------------------------------------- >>> -- > *From:* John Yates via <ftm-tech@rootsweb.com >>> <mailto:ftm-tech@rootsweb.com>> > *To:* "ftm-tech@rootsweb.com >>> <mailto:ftm-tech@rootsweb.com>" >>> <ftm-tech@rootsweb.com <mailto:ftm-tech@rootsweb.com>> > *Sent:* >>> Monday, March 2, 2015 9:33 PM > *Subject:* [FTM-TECH] FTM 3 >>> 22.2.4.781 lost feature > > Where is "Save to Computer" in Web >>> Search -> Save ? >>> > All I get is: >>> > Save to person in your tree >>> > Save to my shoebox >>> ********************************** >>> List information page >>> http://lists.rootsweb.com/index/other/Software/FTM-TECH.html >>> >>> ------------------------------- >>> To unsubscribe from the list, please send an email to >>> FTM-TECH-request@rootsweb.com <mailto:FTM-TECH-request@rootsweb.com> >>> with the word 'unsubscribe' without the quotes in the subject and the >>> body of the message >>> >>> >> ********************************** >> List information page >> http://lists.rootsweb.com/index/other/Software/FTM-TECH.html >> >> ------------------------------- >> To unsubscribe from the list, please send an email to >> FTM-TECH-request@rootsweb.com with the word 'unsubscribe' without the quotes >> in the subject and the body of the message >> > ********************************** > List information page > http://lists.rootsweb.com/index/other/Software/FTM-TECH.html > > ------------------------------- > To unsubscribe from the list, please send an email to FTM-TECH-request@rootsweb.com with the word 'unsubscribe' without the quotes in the subject and the body of the message > -- If you don't know your family history, you are a leaf that doesn't know it is part of a tree. ~ Michael Crichton ~ Mary W. Ellis http://homepages.rootsweb.com/~mwellis/ http://www.rootsweb.com/~ncacgs/

The source information on the database tells the user how to obtain the image, by default it implies that you can't download it I don't understand the indignation though, first what would you rather have, no index or database that gives you the information? And secondly a user can take a screen capture if desired Its not Ancestrys fault if a supplier of data doesn't want the images downloadable is it Ancestry and Findmypast both have a transcript to the census of Scotland 1841 to 1901, they are not allowed access to the page images as scotlandspeople make to much out of them to let them use them There was a similar situation on familysearch with Kent records and Cook County records, both of which restricted access to their images once they realised they had no income once on Ancestry There are a lot of index only databases on Ancestry and elsewhere, they help to find the source of records, what would users rather have, an index only or zero ? Nivard Ovington in Cornwall (UK) On 05/03/2015 19:30, John Yates via wrote: > All of the "noise" on this list could have been avoided if Ancestry > had just displayed a message that "download of this image is not > permitted, contact <XYZ> to purchase it" Or something like that. > Five minutes from a good programmer would have saved me many hours > of tests, and a lot of you time as well (thanks!). And in the end > it turned out we were all correct! > > I'm cc-ing this to Ancestry as well. Perhaps they will put it on a > punch list to do. > > However, it seems to me that in the past, if a record was found but not > downloadable, you could not get as far as seeing it. There was no > "image" link. (this might be another site, but I thought it true on > Ancestry as well). It appeared to me abnormal, and thus as a bug. > > I brought this up last night with a large genealogy group, and there > were quite a number of astounded members saying that isn't that why > we pay big bucks to Ancestry, to get records? What if all sites decided > to do what SAR has done with Ancestry? It breaks the model. I also > think our exorbitant fees to Ancestry should actually get us the record. > If this is the Ancestry model of the future, it doesn't bode well. > > John

All of the "noise" on this list could have been avoided if Ancestry had just displayed a message that "download of this image is not permitted, contact <XYZ> to purchase it" Or something like that. Five minutes from a good programmer would have saved me many hours of tests, and a lot of you time as well (thanks!). And in the end it turned out we were all correct! I'm cc-ing this to Ancestry as well. Perhaps they will put it on a punch list to do. However, it seems to me that in the past, if a record was found but not downloadable, you could not get as far as seeing it. There was no "image" link. (this might be another site, but I thought it true on Ancestry as well). It appeared to me abnormal, and thus as a bug. I brought this up last night with a large genealogy group, and there were quite a number of astounded members saying that isn't that why we pay big bucks to Ancestry, to get records? What if all sites decided to do what SAR has done with Ancestry? It breaks the model. I also think our exorbitant fees to Ancestry should actually get us the record. If this is the Ancestry model of the future, it doesn't bode well. John On 3/5/2015 12:55 PM, John Okerson via wrote: >> You may have missed my earlier post > > I did indeed! > >> Try any image, you will only get the "Save to person in your tree" or > "Save to your Shoebox" options > > You are so darned right! GRRRR > > John

Hi John You may have missed my earlier post Regarding the OPs enquiry re no Save image to my computer Its not a fault or problem its how a particular database is set, at the behest of the database owners, who want people to buy the image from them I don't know how many of this type of database are on Ancestry but if you look at :- U.S., Sons of the American Revolution Membership Applications, 1889-1970 Try any image, you will only get the "Save to person in your tree" or "Save to your Shoebox" options If you try and use right click, save image as, you get a PNG download but no image So its irrelevant how you get to the image on Ancestry, the results are the same, so its a case of taking a screen capture or buying the image as far as I can see Other databases are unaffected as far as I can tell but there may be others with the same restrictions Nivard Ovington in Cornwall (UK) On 05/03/2015 13:24, John Okerson via wrote: > I don't have a Mac, so I have no clue why Save to Computer is not working > for you from the Web search. It works for me in PC version 2012. > >> But in the Web Search, I can go to a Census image, then, directly to the > left of the address bar, there is a "small icon with a drop down icon next > to it". > > The small icon you describe shows Browser Options when you hover over top of > it in FTM 2014. > >> One of the drop down options is "Open In New Window" > That takes me directly to the image on Ancestry, outside of the program, > which does show me the Save to Your Computer. > > Agree with everything else you said Courtney. > > > > John Okerson > Lakeland, TN

> You may have missed my earlier post I did indeed! > Try any image, you will only get the "Save to person in your tree" or "Save to your Shoebox" options You are so darned right! GRRRR John

That's a nifty trick, Courtney. I'll have to look for that when I get on my computer later on. Although my need is usually the opposite. I find a doc outside of FTM and then want to merge it via web merge. Then I can usually just copy and paste the URL. But that should be a two-way street if your trick doesn't work on a Mac. Judy in Ocala On Mar 5, 2015, at 3:36 AM, Courtney via <ftm-tech@rootsweb.com> wrote: John, I don't have a Mac, so I have no clue why Save to Computer is not working for you from the Web search. It works for me in PC version 2012. But in the Web Search, I can go to a Census image, then, directly to the left of the address bar, there is a "small icon with a drop down icon next to it" . One of the drop down options is "Open In New Window" That takes me directly to the image on Ancestry, outside of the program, which does show me the Save to Your Computer. Not sure if FTM Mac shows this same button. If it does, maybe that will work for you? Courtney sitnah@cox.net -------------------------------------------------- From: "John Yates via" <ftm-tech@rootsweb.com> > So you are saying: > > - Use the green leaf to discover the document image in FTM. > > - Fire up Ancestry.com in my browser in another window. > > - Do the identical search that the green leaf just did and hope that I > can mimic it exactly enough to find the record outside of FTM which > no longer can do what I need it to do. > > - Display the image of the record I want in the browser > > - Find the "Save to my computer..." button (that I still am not sure > exists there...) > > If that is what you are saying, this is ridiculous! > (and if I have to guess, it will have the same problem at downloading > the second page of the two page record inside a many page document). > > Give me the right-click "Save Image..." back. Frankly, I'm not sure > how they manage to disable that. They must have tried very hard > to break it. > > John > ********************************** List information page http://lists.rootsweb.com/index/other/Software/FTM-TECH.html ------------------------------- To unsubscribe from the list, please send an email to FTM-TECH-request@rootsweb.com with the word 'unsubscribe' without the quotes in the subject and the body of the message

I don't have a Mac, so I have no clue why Save to Computer is not working for you from the Web search. It works for me in PC version 2012. >But in the Web Search, I can go to a Census image, then, directly to the left of the address bar, there is a "small icon with a drop down icon next to it". The small icon you describe shows Browser Options when you hover over top of it in FTM 2014. > One of the drop down options is "Open In New Window" That takes me directly to the image on Ancestry, outside of the program, which does show me the Save to Your Computer. Agree with everything else you said Courtney. John Okerson Lakeland, TN

John, I don't have a Mac, so I have no clue why Save to Computer is not working for you from the Web search. It works for me in PC version 2012. But in the Web Search, I can go to a Census image, then, directly to the left of the address bar, there is a "small icon with a drop down icon next to it" . One of the drop down options is "Open In New Window" That takes me directly to the image on Ancestry, outside of the program, which does show me the Save to Your Computer. Not sure if FTM Mac shows this same button. If it does, maybe that will work for you? Courtney sitnah@cox.net -------------------------------------------------- From: "John Yates via" <ftm-tech@rootsweb.com> > So you are saying: > > - Use the green leaf to discover the document image in FTM. > > - Fire up Ancestry.com in my browser in another window. > > - Do the identical search that the green leaf just did and hope that I > can mimic it exactly enough to find the record outside of FTM which > no longer can do what I need it to do. > > - Display the image of the record I want in the browser > > - Find the "Save to my computer..." button (that I still am not sure > exists there...) > > If that is what you are saying, this is ridiculous! > (and if I have to guess, it will have the same problem at downloading > the second page of the two page record inside a many page document). > > Give me the right-click "Save Image..." back. Frankly, I'm not sure > how they manage to disable that. They must have tried very hard > to break it. > > John >

Russ, We were typing at the same time. I'm not looking at the actual invitation right now, so I really didn't have more details to add into the Detail or Text fields. Anyway, when I fill the fields the way you suggest, and include "HAWS/LISOWSKI wedding invitation" in the Citation Detail, what I get is this: Christine Haws Bauman wedding invitation, April 1988; privately held by Christine Haws Bauman, Greenwood, Indiana, 2015. HAWS/LISOWSKI wedding invitation. The Reference Note examples on p. 139 shows the item for the lead, not the compiler . That's the issue I have with the generated note. But there doesn't seem to be a way around it, short of my copying and pasting to the reference note each time. But this discussion has made me notice the Italics and Underline buttons above the Reference note, left of the RESET button (in Sources view), so that has been something useful to find! Christine ----- Original Message ----- From: "H R Worthington" <rworthington@att.net> To: "Chris Bauman" <chris.bauman@comcast.net>, ftm-tech@rootsweb.com Sent: Tuesday, March 3, 2015 3:41:55 PM Subject: Re: [FTM-TECH] Source template output problem Chris: Source Template: Artifact (Private Holding) Compiler surname: [ Surname of the compiler ] Bauman Compiler forename(s): [ Given name(s) of the compiler ] Christine Haws Artifact type: [ Description of the artifact in one or two words ] Wedding Invitation Creation date: [ Date the artifact was created ] April 1988 Owner: [ Name of current owner ] Christine Bauman Owner address: [ Street address of the owner [for private use - will not be printed] ] Owner location: [ City, state/province of the owner ] Greenwood, Indiana Year owned: [ Most recent year owned or held ] 2015 Citation Detail would go into more detail about the document. I don't have enough information to do that, but watch the Reference Note to see what is there BEFORE you enter information into the Citation Detail field, then look at it when you get done. What you provided so far is the SOURCE information and NOT the Citation or complete Reference Note Christine Haws Bauman Bauman Family Collection; privately held by Christine Bauman, Greenwood, Indiana , 2015. HAWS/LISOWSKI wedding invitation, April 1988. Russ ___________________________ Mailto:rworthington@att.net From: Chris Bauman via <ftm-tech@rootsweb.com> To: ftm-tech@rootsweb.com Sent: Tuesday, March 3, 2015 3:18 PM Subject: Re: [FTM-TECH] Source template output problem Stepping through the select the template: Archives and Artifacts Private Holdings Artifacts ----- Original Message ----- From: "H R Worthington" < rworthington@att.net > To: "Chris Bauman" < chris.bauman@comcast.net >, ftm-tech@rootsweb.com Sent: Tuesday, March 3, 2015 2:47:01 PM Subject: Re: [FTM-TECH] Source template output problem Chris, IF you go to Select a Source Template, I guess you selected Archives and Artifacts for the Category What did you select for the Template ? Russ ___________________________ Mailto: rworthington@att.net ********************************** List information page http://lists.rootsweb.com/index/other/Software/FTM-TECH.html ------------------------------- To unsubscribe from the list, please send an email to FTM-TECH-request@rootsweb.com with the word 'unsubscribe' without the quotes in the subject and the body of the message

Russ, Yep, that's where I was looking, and yes, the 2nd note is probably the closer example. So I did that (still a private holding) with just the collection name for the compiler and my owner information in the source. I moved the item name to the Citation Detail, with the year of publication. As I said, that information gets put at the end of the Note, where as the example has that description placed first in the note. What gets created: Bauman Family Collection; privately held by Christine Haws Bauman, Greenwood, Indiana, 2015. HAWS/LISOWSKI wedding invitation, April 1988. I can cut and paste the end portion (highlighted?) to the beginning of the Reference note (and change the period after 1988 to a semi-colon (since there's a comma before April). Any other details (item provenance, etc.) can go in the citation text, and will show up at the end (with the box checked). I guess I'll just have to remember to do that with all my artifacts. It would be much easier if I could just fill out the information in the Source form and have it lay out correctly. Thanks for the feedback, though. Christine ----- Original Message ----- From: "H R Worthington" <rworthington@att.net> To: "Chris Bauman" <chris.bauman@comcast.net>, ftm-tech@rootsweb.com Sent: Tuesday, March 3, 2015 3:30:07 PM Subject: Re: [FTM-TECH] Source template output problem Chris, Good so far. What you need to understand is that the Citation DETAIL will help complete the Reference Note go be close to 3.25 and the Reference Note on the top of page 139 That is where you describe what you are looking at. More like the 2nd example Reference Note. You want to Describe that document in the Citation Detail field. You will see the Reference Note updated when you tab out of the Citation Detail field. i use the Citation Text for my own use. Russ ___________________________ Mailto:rworthington@att.net From: Chris Bauman via <ftm-tech@rootsweb.com> To: ftm-tech@rootsweb.com Sent: Tuesday, March 3, 2015 3:18 PM Subject: Re: [FTM-TECH] Source template output problem Stepping through the select the template: Archives and Artifacts Private Holdings Artifacts ----- Original Message ----- From: "H R Worthington" < rworthington@att.net > To: "Chris Bauman" < chris.bauman@comcast.net >, ftm-tech@rootsweb.com Sent: Tuesday, March 3, 2015 2:47:01 PM Subject: Re: [FTM-TECH] Source template output problem Chris, IF you go to Select a Source Template, I guess you selected Archives and Artifacts for the Category What did you select for the Template ? Russ ___________________________ Mailto: rworthington@att.net ********************************** List information page http://lists.rootsweb.com/index/other/Software/FTM-TECH.html ------------------------------- To unsubscribe from the list, please send an email to FTM-TECH-request@rootsweb.com with the word 'unsubscribe' without the quotes in the subject and the body of the message

John, if you read the source on this database you will see it shows how to obtain a copy of the record and why Nivard Ovington in Cornwall (UK) > > David, > > My experiments show that they have disabled the right-click save image as... > > And thus my surprise. I'm not sure how they did that in Firefox, but that is > what I've seen. Programmatically, I'm sure it is possible, and that's what > they've done. > > Wouldn't it be nice if it showed the message: > > "Downloads are not permitted for this file. Contact <THEM> to purchase a > copy...". Or something like it. This would have saved us all a lot of time > wouldn't it! A programmer could have done that in under > 5 minutes. I take that back. A good programmer could have done that in under > 5 minutes. > > John

David, try this database U.S., Sons of the American Revolution Membership Applications, 1889-1970 But reading the source on the database you can see that the society want to sell the user a copy, thats why the save image is disabled Nivard Ovington in Cornwall (UK) On 03/03/2015 21:07, David Abernathy via wrote: > John, > I have not found any either at this time. > > > Thanks, > David C Abernathy

Stepping through the select the template: Archives and Artifacts Private Holdings Artifacts ----- Original Message ----- From: "H R Worthington" <rworthington@att.net> To: "Chris Bauman" <chris.bauman@comcast.net>, ftm-tech@rootsweb.com Sent: Tuesday, March 3, 2015 2:47:01 PM Subject: Re: [FTM-TECH] Source template output problem Chris, IF you go to Select a Source Template, I guess you selected Archives and Artifacts for the Category What did you select for the Template ? Russ ___________________________ Mailto:rworthington@att.net

Russ-- If I quoted Geoff, it was accidental! Anyway, I have most (if not all) my facts sourced, but probably have not been entirely consistent regarding the format. So I'm trying to have the Templates make me more . . . rigorous, maybe? . . . in that respect. Nothing is in either the Citation Detail or the Citation Text field. When I did put something in the Citation Detail, it showed up at the end of the reference note (after the 2015). Ditto for the Citation Text. Anyway, the Reference Note generated is: Bauman Family Collection HAWS/LISOWSKI wedding invitation, April 1988; privately held by Christine Haws Bauman, Greenwood, Indiana, 2015. The Source Bibliography shows up as: Bauman Family Collection. HAWS/LISOWSKI wedding invitation. April 1988. Privately held by Christine Haws Bauman, Greenwood, Indiana. 2015. The source seems fine (though apparently I will have a source listed for each artifact item I might use--that's a lot of funeral cards . . . .) If I changed up the source information somewhat--put my names back in as compiler, put "Bauman Family Collection" as the Artifact type (allowing all my artifacts to use this one source), then I need to take out the creation date info (April 1988), since obviously all my assorted ephemera won't have the same date. I could then put the wedding information in the Citation detail (and I guess put the creation date in there). That generates this Reference Note: Christine Haws Bauman Bauman Family Collection; privately held by Christine Bauman, Greenwood, Indiana , 2015. HAWS/LISOWSKI wedding invitation, April 1988. . . . which REALLY doesn't come anywhere close to being right, either. I didn't play around with Personal Correspondence or Historic Letter as options, but looking at them now, they really don't seem right. This seems more like a funeral card, school diploma, etc. Christine ----- Original Message ----- From: "H R Worthington" <rworthington@att.net> To: "Chris Bauman" <chris.bauman@comcast.net>, ftm-tech@rootsweb.com Sent: Tuesday, March 3, 2015 2:44:17 PM Subject: Re: [FTM-TECH] Source template output problem Christine, Using the words from Geoff Rasmussen, huh? But what do you have in the Citation Detail field? anything in the Citation Text field? What does the Reference Note look like? Russ ________________________ Mailto:rworthington@att.net From: Chris Bauman via <ftm-tech@rootsweb.com> To: ftm-tech@rootsweb.com Sent: Tuesday, March 3, 2015 2:34 PM Subject: [FTM-TECH] Source template output problem I'm in the process of "re-doing" all the sources in my file(s), using the Templates to keep the sources consistent. I would like the end results to follow the parameters in Evidence Explained . This morning I'm working on a wedding invitation I have. I chose the Artifact (Private Holding) template, but I'm perturbed that the reference note created doesn't follow the reference note format in EE . In the Edit Source screen, I originally put my Surname and Forenames (for compiler) in the appropriate fields (Surname is required), and a title (wedding invitation) in the Artifact Type, plus myself and my address in the other fields. The Source gets created and shows up in the Source Bibliography leading with me as the compiler (which is ok). But the reference note lists compiler name first, followed by the artifact type, with the rest of the information correct. Page 139 of EE indicates the reference note should begin with the Artifact Type, followed by Surname & Forename (or a collection name), and the rest of the info. But FTM (2014, build 1345 running on Windows 7) creates the Reference Note those items reversed. If I change the Surname field to "Bauman Family Collection" it reads a little better, but obviously that still doesn't change the order. I realize I can rework the reference note wording, but I don't want to/shouldn't have to do that each time I use that source--it could be weeks or months between the times I'm entering an artifact like that, and I don't want to have to remember to reword it every time. Has anyone reported this as a problem? Or found a different Template that will put the Reference note in the right sequence? Thanks! Christine, IBSSG Life's short . . . do genealogy first! ********************************** List information page http://lists.rootsweb.com/index/other/Software/FTM-TECH.html ------------------------------- To unsubscribe from the list, please send an email to FTM-TECH-request@rootsweb.com with the word 'unsubscribe' without the quotes in the subject and the body of the message

I'm in the process of "re-doing" all the sources in my file(s), using the Templates to keep the sources consistent. I would like the end results to follow the parameters in Evidence Explained . This morning I'm working on a wedding invitation I have. I chose the Artifact (Private Holding) template, but I'm perturbed that the reference note created doesn't follow the reference note format in EE . In the Edit Source screen, I originally put my Surname and Forenames (for compiler) in the appropriate fields (Surname is required), and a title (wedding invitation) in the Artifact Type, plus myself and my address in the other fields. The Source gets created and shows up in the Source Bibliography leading with me as the compiler (which is ok). But the reference note lists compiler name first, followed by the artifact type, with the rest of the information correct. Page 139 of EE indicates the reference note should begin with the Artifact Type, followed by Surname & Forename (or a collection name), and the rest of the info. But FTM (2014, build 1345 running on Windows 7) creates the Reference Note those items reversed. If I change the Surname field to "Bauman Family Collection" it reads a little better, but obviously that still doesn't change the order. I realize I can rework the reference note wording, but I don't want to/shouldn't have to do that each time I use that source--it could be weeks or months between the times I'm entering an artifact like that, and I don't want to have to remember to reword it every time. Has anyone reported this as a problem? Or found a different Template that will put the Reference note in the right sequence? Thanks! Christine, IBSSG Life's short . . . do genealogy first!

David, My experiments show that they have disabled the right-click save image as... And thus my surprise. I'm not sure how they did that in Firefox, but that is what I've seen. Programmatically, I'm sure it is possible, and that's what they've done. Wouldn't it be nice if it showed the message: "Downloads are not permitted for this file. Contact <THEM> to purchase a copy...". Or something like it. This would have saved us all a lot of time wouldn't it! A programmer could have done that in under 5 minutes. I take that back. A good programmer could have done that in under 5 minutes. John On 3/3/2015 2:04 PM, David Abernathy wrote: > John, > I am NOT a Mac user. > > I think the issue is that things were changed at Ancestry. I even with my > Windows version have the same issue that you are having with then Mac > version. > There is this same issue when just browsing Ancestry using one's browser. So > it is an issue with Ancestry.com not FTM. > > When you are on the internet using your normal browser, how do you save an > image to your computer? > On a windows system using IE, all one needs to do is Right click the image > and select "Save Picture as", and one is given the File Save pane, which one > can change the location, names and a few other options before the save is > made. > > If you were to do the same thing within FTM Mac 3 version while viewing the > image that you want to save to your local machine, it should work. > > > Thanks, > David C Abernathy > Email disclaimers > ---------------------------------------------------------------------------- > This message represents the official view of the voices in my head. > ---------------------------------------------------------------------------- > http://www.SchmeckAbernathy.com > == All outgoing and incoming mail is scanned by F-Prot Antivirus == > > > -----Original Message----- > From: ftm-tech-bounces@rootsweb.com [mailto:ftm-tech-bounces@rootsweb.com] > On Behalf Of John Yates via > Sent: Tuesday, March 03, 2015 8:15 AM > To: ftm-tech@rootsweb.com > Subject: Re: [FTM-TECH] FTM 3 22.2.4.781 lost feature > > All I know is that I have until this latest FTM Mac 3 version been able to > save a record image to my computer in a LOCAL DISK FILE. It may have been > with right-click save image. But even that is missing, or when it does > appear it saves an empty or corrupted file. > > I saved the image to shoebox. Shoebox is not described in the FTM Manual. I > googled and it seems it is only available on ancesty.com . > I went there. Found shoebox at the bottom of the page. I clicked on the > record I want to save TO MY COMPUTER. > > First, I clicked on VIEW. The SAVE button merely offers that it is in my > shoebox, and the other option is to SAVE TO PERSON IN MY TREE. > This is the ONLINE TREE where it is useless to me. > > Second, I click on VIEW. There is the image I want to download to A FILE ON > MY COMPUTER. > > I click on SAVE. It offers that it is in my shoebox or I can save it to a > person in my tree. No good for me. > > Then I right-clicked. Save Image As... displays (an is probably the way I > got these before). However, Ancestry has done something to prevent the > actual image from saving. It is a garbage, empty file. > I tried using Firefox and Chrome browsers. Same nonsense. > > Now, would someone care to tell me where the "Save to Computer" > option went, and when it will be back? > > (I've cc-ed this one to Ancestry Support). > > John > > On 3/3/2015 8:06 AM, H R Worthington wrote: >> John, >> >> Save to computer has not been with us since FTM2008 and the first Mac >> version >> >> As I said before, Save to Computer or Save to Shoebox is from the Web > Site. >> >> I didn't say anything about online trees. >> >> Go to the record you want, and you will see the Shoebox or Save to >> Computer option. >> >> Russ >> ___________________________ >> >> Mailto:rworthington@att.net >> >> ---------------------------------------------------------------------- >> -- >> *From:* John Yates via <ftm-tech@rootsweb.com> >> *To:* "ftm-tech@rootsweb.com" <ftm-tech@rootsweb.com> >> *Sent:* Tuesday, March 3, 2015 1:51 AM >> *Subject:* Re: [FTM-TECH] FTM 3 22.2.4.781 lost feature >> >> No, "Save to Computer" is not in the latest version of FTM 3. >> >> Why not? >> >> I have no use for on line trees. >> >> John >> >> >> >> On 3/2/2015 10:42 PM, H R Worthington wrote: >> > John, >> > >> > Those features are on the WEb Site and in FTM-3. >> > >> > Russ >> > ___________________________ >> > >> > Mailto:rworthington@att.net <mailto:rworthington@att.net> > > >> ---------------------------------------------------------------------- >> -- > *From:* John Yates via <ftm-tech@rootsweb.com >> <mailto:ftm-tech@rootsweb.com>> > *To:* "ftm-tech@rootsweb.com >> <mailto:ftm-tech@rootsweb.com>" >> <ftm-tech@rootsweb.com <mailto:ftm-tech@rootsweb.com>> > *Sent:* >> Monday, March 2, 2015 9:33 PM > *Subject:* [FTM-TECH] FTM 3 >> 22.2.4.781 lost feature > > Where is "Save to Computer" in Web >> Search -> Save ? >> > All I get is: >> > Save to person in your tree >> > Save to my shoebox >> ********************************** >> List information page >> http://lists.rootsweb.com/index/other/Software/FTM-TECH.html >> >> ------------------------------- >> To unsubscribe from the list, please send an email to >> FTM-TECH-request@rootsweb.com <mailto:FTM-TECH-request@rootsweb.com> >> with the word 'unsubscribe' without the quotes in the subject and the >> body of the message >> >> > ********************************** > List information page > http://lists.rootsweb.com/index/other/Software/FTM-TECH.html > > ------------------------------- > To unsubscribe from the list, please send an email to > FTM-TECH-request@rootsweb.com with the word 'unsubscribe' without the quotes > in the subject and the body of the message >

Judy, I think the FTM Web Search inside of FTM actually can be considered on the web, and download to computer used to be there. As it is sometimes now. Sometimes meaning they choose not to hide it for no explicit reason, not letting the use know why it is not there. John On 3/3/2015 1:31 PM, Judy in Ocala wrote: > John, I have never been able to do what you are asking for via FTM. Save to computer has always been an online feature only, as far as I know. > > Judy in Ocala > > On Mar 3, 2015, at 11:40 AM, John Yates via <ftm-tech@rootsweb.com> wrote: > > I now tried the Merge business. I displayed the record I wanted, went > through Merge, allowing FTM to pollute my person record with its > nonsense, and sure enough it did save the media image of the page. > Next test will be to uncheck everything so it doesn't pollute my > person records and see if the media still is saved. > > But, I had to discover where the media was saved in the FTM tree > in order to copy it to where I want it on my computer. > > So many unnecessary steps! When will "SAVE TO MY COMPUTER" be brought > back???? > > However, there is now another fatal problem. The document I found and > want to save is a part of a many page document. So the merge save > saved only the first page of what I want. > > So I clicked the right arrow for the second page. Went through the > merge again. It saved the previous page again!!!!! Not the page that > was displaying. Not the page that I needed. > > I repeat, when will they bring back "SAVE TO MY COMPUTER" which worked > fine for me until recently? > > The only thing I have been able to do is to display the image on as much > real estate of my 25" screen as possible and do an Apple Screen Capture. > Thank you Apple!!!! This, of course, works fine for both pages. But > resolution suffers some. And this would not be necessary if they would > just bring back "SAVE TO MY COMPUTER". > > Why does Ancestry leap backward sometimes with their "advances"? > > John > >> On 3/3/2015 8:08 AM, H R Worthington wrote: >> Web Merge is NOT for online tres. It is a Feature to merge RECORDS from >> Ancestry or any other website, into FTM2014 or FTM-3. >> >> I have told you 3 times out to save an image directly to your computer, >> from the website with your browser.. >> >> Russ >> ___________________________ >> >> Mailto:rworthington@att.net >> >> ------------------------------------------------------------------------ >> *From:* John Yates via <ftm-tech@rootsweb.com> >> *To:* "ftm-tech@rootsweb.com" <ftm-tech@rootsweb.com> >> *Sent:* Tuesday, March 3, 2015 1:52 AM >> *Subject:* Re: [FTM-TECH] FTM 3 22.2.4.781 lost feature >> >> Web Merge is to an on line tree, yes? I do not have an on line >> tree. >> >> How do I save the images, etc. directly to my computer? >> >> John >> >> >> >>> On 3/2/2015 10:43 PM, H R Worthington wrote: >>> John, >>> >>> The Web Merge will include an Image. >>> >>> Russ >>> ___________________________ >>> >>> Mailto:rworthington@att.net <mailto:rworthington@att.net> >>> >>> ------------------------------------------------------------------------ >>> *From:* John Yates via <ftm-tech@rootsweb.com >> <mailto:ftm-tech@rootsweb.com>> >>> *To:* "ftm-tech@rootsweb.com <mailto:ftm-tech@rootsweb.com>" >> <ftm-tech@rootsweb.com <mailto:ftm-tech@rootsweb.com>> >>> *Sent:* Monday, March 2, 2015 9:33 PM >>> *Subject:* [FTM-TECH] FTM 3 22.2.4.781 lost feature >>> >>> Where is "Save to Computer" in Web Search -> Save ? >>> All I get is: >>> Save to person in your tree >>> Save to my shoebox >>> >>> Neither of these is useful to me. >> ********************************** >> List information page >> http://lists.rootsweb.com/index/other/Software/FTM-TECH.html >> >> ------------------------------- >> To unsubscribe from the list, please send an email to >> FTM-TECH-request@rootsweb.com <mailto:FTM-TECH-request@rootsweb.com> >> with the word 'unsubscribe' without the quotes in the subject and the >> body of the message >> >> > ********************************** > List information page > http://lists.rootsweb.com/index/other/Software/FTM-TECH.html > > ------------------------------- > To unsubscribe from the list, please send an email to FTM-TECH-request@rootsweb.com with the word 'unsubscribe' without the quotes in the subject and the body of the message >

Rosemary, This appears to be the answer. But this is terribly user unfriendly. If this is a restriction, they should show a message like: "This file is unavailable for download. Contact <THEM> to purchase a hard copy". Or something like that. I've wasted hours on this now. Because of incompetent programmers! Is it any wonder no one ever says nice things about Ancestry/FTM in my circles. John P.S. The screen capture of this record will suffice. It is insufficient for evidence of any kind, and thus not worth purchasing. On 3/3/2015 1:10 PM, Rosemary wrote: > John, > > The SAR and DAR records are not available as "Save to Computer" at all. > This is part of the contract that Ancestry has with these 2 > organisations. Other databases (collections) also have these > restrictions. I have to use a snipping tool to get these saved locally. > SAR and DAR want you to pay them for the images. > > Ancestry isn't the only major genealogy site with these restrictions in > place. FamilySearch has restrictions on some collections that limit > access unless you are at a Family History Centre. Once again the owner > of the collection wishes to be paid for access. Kent Parish Registers > are one example. > > Rosemary > > > On 3/3/2015 10:40 AM, John Yates via wrote: >> I now tried the Merge business. I displayed the record I wanted, went >> through Merge, allowing FTM to pollute my person record with its >> nonsense, and sure enough it did save the media image of the page. >> Next test will be to uncheck everything so it doesn't pollute my >> person records and see if the media still is saved. >> >> But, I had to discover where the media was saved in the FTM tree >> in order to copy it to where I want it on my computer. >> >> So many unnecessary steps! When will "SAVE TO MY COMPUTER" be brought >> back???? >> >> However, there is now another fatal problem. The document I found and >> want to save is a part of a many page document. So the merge save >> saved only the first page of what I want. >> >> So I clicked the right arrow for the second page. Went through the >> merge again. It saved the previous page again!!!!! Not the page that >> was displaying. Not the page that I needed. >> >> I repeat, when will they bring back "SAVE TO MY COMPUTER" which worked >> fine for me until recently? >> >> The only thing I have been able to do is to display the image on as much >> real estate of my 25" screen as possible and do an Apple Screen Capture. >> Thank you Apple!!!! This, of course, works fine for both pages. But >> resolution suffers some. And this would not be necessary if they would >> just bring back "SAVE TO MY COMPUTER". >> >> Why does Ancestry leap backward sometimes with their "advances"? >> >> John >> >> On 3/3/2015 8:08 AM, H R Worthington wrote: >>> Web Merge is NOT for online tres. It is a Feature to merge RECORDS from >>> Ancestry or any other website, into FTM2014 or FTM-3. >>> >>> I have told you 3 times out to save an image directly to your computer, >>> from the website with your browser.. >>> >>> Russ >>> ___________________________ >>> >>> Mailto:rworthington@att.net >>> >>> ------------------------------------------------------------------------ >>> *From:* John Yates via <ftm-tech@rootsweb.com> >>> *To:* "ftm-tech@rootsweb.com" <ftm-tech@rootsweb.com> >>> *Sent:* Tuesday, March 3, 2015 1:52 AM >>> *Subject:* Re: [FTM-TECH] FTM 3 22.2.4.781 lost feature >>> >>> Web Merge is to an on line tree, yes? I do not have an on line >>> tree. >>> >>> How do I save the images, etc. directly to my computer? >>> >>> John >>> >>> >>> >>> On 3/2/2015 10:43 PM, H R Worthington wrote: >>> > John, >>> > >>> > The Web Merge will include an Image. >>> > >>> > Russ >>> > ___________________________ >>> > >>> > Mailto:rworthington@att.net <mailto:rworthington@att.net> >>> > >>> > >>> ------------------------------------------------------------------------ >>> > *From:* John Yates via <ftm-tech@rootsweb.com >>> <mailto:ftm-tech@rootsweb.com>> >>> > *To:* "ftm-tech@rootsweb.com <mailto:ftm-tech@rootsweb.com>" >>> <ftm-tech@rootsweb.com <mailto:ftm-tech@rootsweb.com>> >>> > *Sent:* Monday, March 2, 2015 9:33 PM >>> > *Subject:* [FTM-TECH] FTM 3 22.2.4.781 lost feature >>> > >>> > Where is "Save to Computer" in Web Search -> Save ? >>> > All I get is: >>> > Save to person in your tree >>> > Save to my shoebox >>> > >>> > Neither of these is useful to me. >>> ********************************** >>> List information page >>> http://lists.rootsweb.com/index/other/Software/FTM-TECH.html >>> >>> ------------------------------- >>> To unsubscribe from the list, please send an email to >>> FTM-TECH-request@rootsweb.com <mailto:FTM-TECH-request@rootsweb.com> >>> with the word 'unsubscribe' without the quotes in the subject and the >>> body of the message >>> >>> >> ********************************** >> List information page >> http://lists.rootsweb.com/index/other/Software/FTM-TECH.html >> >> ------------------------------- >> To unsubscribe from the list, please send an email to >> FTM-TECH-request@rootsweb.com with the word 'unsubscribe' without the >> quotes in the subject and the body of the message >

John, I have never been able to do what you are asking for via FTM. Save to computer has always been an online feature only, as far as I know. Judy in Ocala On Mar 3, 2015, at 11:40 AM, John Yates via <ftm-tech@rootsweb.com> wrote: I now tried the Merge business. I displayed the record I wanted, went through Merge, allowing FTM to pollute my person record with its nonsense, and sure enough it did save the media image of the page. Next test will be to uncheck everything so it doesn't pollute my person records and see if the media still is saved. But, I had to discover where the media was saved in the FTM tree in order to copy it to where I want it on my computer. So many unnecessary steps! When will "SAVE TO MY COMPUTER" be brought back???? However, there is now another fatal problem. The document I found and want to save is a part of a many page document. So the merge save saved only the first page of what I want. So I clicked the right arrow for the second page. Went through the merge again. It saved the previous page again!!!!! Not the page that was displaying. Not the page that I needed. I repeat, when will they bring back "SAVE TO MY COMPUTER" which worked fine for me until recently? The only thing I have been able to do is to display the image on as much real estate of my 25" screen as possible and do an Apple Screen Capture. Thank you Apple!!!! This, of course, works fine for both pages. But resolution suffers some. And this would not be necessary if they would just bring back "SAVE TO MY COMPUTER". Why does Ancestry leap backward sometimes with their "advances"? John > On 3/3/2015 8:08 AM, H R Worthington wrote: > Web Merge is NOT for online tres. It is a Feature to merge RECORDS from > Ancestry or any other website, into FTM2014 or FTM-3. > > I have told you 3 times out to save an image directly to your computer, > from the website with your browser.. > > Russ > ___________________________ > > Mailto:rworthington@att.net > > ------------------------------------------------------------------------ > *From:* John Yates via <ftm-tech@rootsweb.com> > *To:* "ftm-tech@rootsweb.com" <ftm-tech@rootsweb.com> > *Sent:* Tuesday, March 3, 2015 1:52 AM > *Subject:* Re: [FTM-TECH] FTM 3 22.2.4.781 lost feature > > Web Merge is to an on line tree, yes? I do not have an on line > tree. > > How do I save the images, etc. directly to my computer? > > John > > > >> On 3/2/2015 10:43 PM, H R Worthington wrote: >> John, >> >> The Web Merge will include an Image. >> >> Russ >> ___________________________ >> >> Mailto:rworthington@att.net <mailto:rworthington@att.net> >> >> ------------------------------------------------------------------------ >> *From:* John Yates via <ftm-tech@rootsweb.com > <mailto:ftm-tech@rootsweb.com>> >> *To:* "ftm-tech@rootsweb.com <mailto:ftm-tech@rootsweb.com>" > <ftm-tech@rootsweb.com <mailto:ftm-tech@rootsweb.com>> >> *Sent:* Monday, March 2, 2015 9:33 PM >> *Subject:* [FTM-TECH] FTM 3 22.2.4.781 lost feature >> >> Where is "Save to Computer" in Web Search -> Save ? >> All I get is: >> Save to person in your tree >> Save to my shoebox >> >> Neither of these is useful to me. > ********************************** > List information page > http://lists.rootsweb.com/index/other/Software/FTM-TECH.html > > ------------------------------- > To unsubscribe from the list, please send an email to > FTM-TECH-request@rootsweb.com <mailto:FTM-TECH-request@rootsweb.com> > with the word 'unsubscribe' without the quotes in the subject and the > body of the message > > ********************************** List information page http://lists.rootsweb.com/index/other/Software/FTM-TECH.html ------------------------------- To unsubscribe from the list, please send an email to FTM-TECH-request@rootsweb.com with the word 'unsubscribe' without the quotes in the subject and the body of the message