Hi Steve/List Thanks Steve ! I solved the problem - I use the 5000 ft/inch and 150 with many images and it has always worked fine. What was causing the problem was that my files were in the root directory, as soon as I moved the .jpg, .dat, .mbl, .mbk files into their own folder everything worked just fine. Bill -----Original Message----- From: Steve Broyles [mailto:steve.broyles@attbi.com] Sent: Tuesday, December 31, 2002 12:03 PM To: DEED-MAPPER-USERS-L@rootsweb.com Subject: Re: [DMU] Navigation in Deedmapper The program wants a ft per inch figure that is lower than 2400. (This funny limit has been in the program since day one, for reasons that are lost in the mists of time.) What the program is really trying to determine is the number of feet per scanning dot so it can properly scale the image. It does this by dividing the ft per inch by the dpi. In your case 5000/150 = 33.33 ft per dot. So, here's a trick to get around the 2400 limit. Divide 5000 and 150 by the same number, for example, 5. 1000 ft per inch 30 dpi These two have the same ft per dot value as 5000 and 150. Steve Broyles ----- Original Message ----- From: "Bill" <bill-good1@attbi.com> To: <DEED-MAPPER-USERS-L@rootsweb.com> Sent: Tuesday, December 31, 2002 1:52 PM Subject: RE: [DMU] Navigation in Deedmapper > Hello Deed Mapper users > I can not get an image to load. > > View> > Options> > Images> > Enable checked> > 5000 ft per inch > 150 dpi > 0 for all others (optional entries, does not work even when a number is > entered in all) > > I keep getting this error message "Please enter an integer between 1 and > 2400" > > I use images all the time but this time It does not seem to work. It is > a small .jpg file that I am trying to use > > Any help appreciated > > Bill > > > ============================== > To join Ancestry.com and access our 1.2 billion online genealogy records, go to: > http://www.ancestry.com/rd/redir.asp?targetid=571&sourceid=1237 > ============================== To join Ancestry.com and access our 1.2 billion online genealogy records, go to: http://www.ancestry.com/rd/redir.asp?targetid=571&sourceid=1237