I was told by a computer tech to turn the printer ON, make sure the ink cartridges are properly seated,then reach over and pull the plug (disconnect from electricity) with the printer turned on, wait 30 seconds and re-plug it in and (turn printer "on" if it has automatically shut off) He said this would force the printer back to "out of the box" settings and would usually clear up the problem. It has worked for me, hopefully it will work for you. Anna > "snip" > > > > From: Cheryl Clark <[email protected]> > >To: "[email protected]" <[email protected]> > >Sent: Thursday, January 19, 2012 6:23:39 PM > >Subject: [COMPUTERS] Printer question > > > >Hello > > > >I hope that someone can help me, I have a HP 1050 printer and I am having > trouble as it is saying that the ink cartridges are faulty and to replace > them, I have bought a new black and colour cartridge and am still getting > this message. > > > >What do I do? > > > >Sincerely > >Cheryl Clark > >[email protected] > >Love was not put in your heart to stay, love is not love until you give > it away. > > > > > > > >:-~:-~:-~:-~:-~:-~:-~:-~:-~:-~: > > > >Please refrain from posting commercial URLs and from discussing prices on > the list. > > > >Remember to SNIP when replying. > > > >:-~:-~:-~:-~:-~:-~:-~:-~:-~:-~: > > > > > > > > > >------------------------------- > >To unsubscribe from the list, please send an email to > [email protected] with the word 'unsubscribe' without the > quotes in the subject and the body of the message > > > > > > > > > > :-~:-~:-~:-~:-~:-~:-~:-~:-~:-~: > > Please refrain from posting commercial URLs and from discussing prices on > the list. > > Remember to SNIP when replying. > > :-~:-~:-~:-~:-~:-~:-~:-~:-~:-~: > > > > > ------------------------------- > To unsubscribe from the list, please send an email to > [email protected] with the word 'unsubscribe' without the > quotes in the subject and the body of the message > -- ****** - Dear Lord, please keep your arm around my shoulders and your hand across my mouth.****** --Author unknown

Try removing and replacing the new cartridges and check them to make sure they are fitting in properly. If they are not seated correctly they will register as bad. Once mine did this and I found the clasp that held them in had not shut properly.   Also, if you went a long time without using your printer the feeds may have dried ink in them. Don't know how to remedy this.   Bea   From: Cheryl Clark <[email protected]> >To: "[email protected]" <[email protected]> >Sent: Thursday, January 19, 2012 6:23:39 PM >Subject: [COMPUTERS] Printer question > >Hello >  >I hope that someone can help me, I have a HP 1050 printer and I am having trouble as it is saying that the ink cartridges are faulty and to replace them, I have bought a new black and colour cartridge and am still getting this message. >  >What do I do? >  >Sincerely >Cheryl Clark >[email protected] >Love was not put in your heart to stay, love is not love until you give it away. > > > >:-~:-~:-~:-~:-~:-~:-~:-~:-~:-~: > >Please refrain from posting commercial URLs and from discussing prices on the list. > >Remember to SNIP when replying. > >:-~:-~:-~:-~:-~:-~:-~:-~:-~:-~: > > > > >------------------------------- >To unsubscribe from the list, please send an email to [email protected] with the word 'unsubscribe' without the quotes in the subject and the body of the message > > >

It sounds like your sensors or print heads may not be working correctly. It may need servicing... -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Cheryl Clark Sent: Thursday, January 19, 2012 2:24 PM To: [email protected] Subject: [COMPUTERS] Printer question Hello   I hope that someone can help me, I have a HP 1050 printer and I am having trouble as it is saying that the ink cartridges are faulty and to replace them, I have bought a new black and colour cartridge and am still getting this message.   What do I do?   Sincerely Cheryl Clark [email protected] Love was not put in your heart to stay, love is not love until you give it away.

Win XP Home SP3. I have been working a long time to get my Power options to work correctly. For various reasons, I need my computer to read never on all 3 options. I have tried various suggestions from Google. We have another XP computer with similar software that has "never" locked in on all 3 options. I have removed everything from start up but noting seems to correct the problem. I can get "never" in all 3 options, save it, go back in a few minutes and it has changed back. Is there a way to disable "Power Options" that will not create worse problems?

I want to thank all for the suggestions. The problem is solved I deleted the free Avast. It was telling me all web site that I typed into I E was Malicious. Also found out I need to preceed an url with www. [world wide web]. I did not have to do this with my Dell computer. I now have Micro Soft Security Essentials for virus protection. How often does this update ? Will it show it is updating similai to Avast / Sue. :-~:-~:-~:-~:-~:-~:-~:-~:-~:-~: Please refrain from posting commercial URLs and from discussing prices on the list. Remember to SNIP when replying. :-~:-~:-~:-~:-~:-~:-~:-~:-~:-~: ------------------------------- To unsubscribe from the list, please send an email to [email protected] [1] with the word 'unsubscribe' without the quotes in the subject and the body of the message Links: ------ [1] mailto:[email protected]

Hello   I hope that someone can help me, I have a HP 1050 printer and I am having trouble as it is saying that the ink cartridges are faulty and to replace them, I have bought a new black and colour cartridge and am still getting this message.   What do I do?   Sincerely Cheryl Clark [email protected] Love was not put in your heart to stay, love is not love until you give it away.

Hi David. I tried using the instructions several times. Everytime I would leave Control Panel and go back, it would be changed. It's not saving them. I downloaded a Scrip File that was suppose to correct a "not saving" problem but it didn't help it. I don't know what my problem is. Thanks, Joe ----- Original Message ----- From: "David C Abernathy" <[email protected]> To: <[email protected]> Sent: Monday, January 16, 2012 7:17 PM Subject: Re: [COMPUTERS] Power Options Joe, Go to Start, Control Panel, the Power Options. Set ALL areas to be Never Click Save AS, and type in a scheme name, I use NeverNever, then OK yourself out. Thanks, David C Abernathy Email disclaimers ---------------------------------------------------------------------------- This message represents the official view of the voices in my head. ---------------------------------------------------------------------------- http://www.SchmeckAbernathy.com == All outgoing and incoming mail is scanned by F-Prot Antivirus == -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Joe Snow Sent: Monday, January 16, 2012 2:24 PM To: [email protected] Subject: Re: [COMPUTERS] Power Options Hello David, thanks for your reply. Can you walk me through it by steps. Joe ----- Original Message ----- From: "David C Abernathy" <[email protected]> To: <[email protected]> Sent: Monday, January 16, 2012 5:12 PM Subject: Re: [COMPUTERS] Power Options Joe, You need to define the scheme and then save it. What you are doing is saving the current settings and then changing them. If you want them saved you will need to save them again. Thanks, David C Abernathy Email disclaimers ---------------------------------------------------------------------------- This message represents the official view of the voices in my head. ---------------------------------------------------------------------------- http://www.SchmeckAbernathy.com == All outgoing and incoming mail is scanned by F-Prot Antivirus == -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Joe Snow Sent: Monday, January 16, 2012 9:38 AM To: zwwComputers Subject: [COMPUTERS] Power Options I have a problem with my Power Option Windows XP Home SP3. My preference is never on al three option Monitor-Hard Drive- System. I can change all three to never, save it etc. Later I can go back and they have changed. I created a scheme and named it new. Change all to never and applied. In no time they had changed themselves. What am I doing wrong. We have another XP computer that they all stay on never. Joe :-~:-~:-~:-~:-~:-~:-~:-~:-~:-~: Please refrain from posting commercial URLs and from discussing prices on the list. Remember to SNIP when replying. :-~:-~:-~:-~:-~:-~:-~:-~:-~:-~: ------------------------------- To unsubscribe from the list, please send an email to [email protected] with the word 'unsubscribe' without the quotes in the subject and the body of the message :-~:-~:-~:-~:-~:-~:-~:-~:-~:-~: Please refrain from posting commercial URLs and from discussing prices on the list. Remember to SNIP when replying. :-~:-~:-~:-~:-~:-~:-~:-~:-~:-~: ------------------------------- To unsubscribe from the list, please send an email to [email protected] with the word 'unsubscribe' without the quotes in the subject and the body of the message :-~:-~:-~:-~:-~:-~:-~:-~:-~:-~: Please refrain from posting commercial URLs and from discussing prices on the list. Remember to SNIP when replying. :-~:-~:-~:-~:-~:-~:-~:-~:-~:-~: ------------------------------- To unsubscribe from the list, please send an email to [email protected] with the word 'unsubscribe' without the quotes in the subject and the body of the message :-~:-~:-~:-~:-~:-~:-~:-~:-~:-~: Please refrain from posting commercial URLs and from discussing prices on the list. Remember to SNIP when replying. :-~:-~:-~:-~:-~:-~:-~:-~:-~:-~: ------------------------------- To unsubscribe from the list, please send an email to [email protected] with the word 'unsubscribe' without the quotes in the subject and the body of the message

There is another item that I didn't address.  Once you've saved any document in RTF format (rich text), you can also go to the folder where you have that saved, and save it again, in Word format.  Highlight the name of the document in your folder, then SAVE AS and under the formats,  you can usually select Word 2003 format, and then it's your normal format.  Myra   Whew!  Someone finally asked a question I might know a little bit about!  I have 2003 and to move a picture anywhere you wish, you highlight the picture by clicking on it, then select 'Format' from your top toolbar.  When the selection box comes up, you may select any of the choices there.  Generally, because once you have formatted the picture in some way, you can drag and drop, I choose "Layout", then "Tight", and the the horizontal alignment of 'center'.  You can choose left or right, but basically, you can still drag and drop the picture in your text and the text will wrap itself around the picture.    Now you have to click on the picture again to show the corner and center side markers, and you just position your cursor in the middle of the picture, and drag and drop.  If you want to be a little fancy, the green button at the top is your tilt button, and you can do just about anything with the picture that way.  If it doesn't work the way you want at first, resize the picture (grab a corner and pull in towardshe opposite corner to make smaller, or pull out to make larger) and drag and drop into the text you want it to be in.  Or just move the picture around until you're satisfied. Myra Herron I am working on creating a narrative account of our family history from a RootsMagic Report into RTF format where I have flexibility to make any changes, additions, etc. I have added some inserts of documents and pictures but now want to move them around - not on the page but in the document itself. I cannot find any way to relocate them or delete them and then replace them where I want them. I have been to many of the Help topics but nothing seems to address this. If anyone is familiar with MS Word, I would appreciate any help you can offer. Barbara Cogburn

Sorry, I forgot the rest of the instructions.  To move a picture from one location to another, you can copy and paste, OR reinsert the same picture in a different area.  To delete a picture, highlight it by clicking on it so you can see the corner markers, and then hit your delete key.  Myra Herron I am working on creating a narrative account of our family history from a RootsMagic Report into RTF format where I have flexibility to make any changes, additions, etc. I have added some inserts of documents and pictures but now want to move them around - not on the page but in the document itself. I cannot find any way to relocate them or delete them and then replace them where I want them. I have been to many of the Help topics but nothing seems to address this. If anyone is familiar with MS Word, I would appreciate any help you can offer. Barbara Cogburn :-~:-~:-~:-~:-~:-~:-~:-~:-~:-~: Please refrain from posting commercial URLs and from discussing prices on the list. Remember to SNIP when replying. :-~:-~:-~:-~:-~:-~:-~:-~:-~:-~: _____________________________________________ To unsubscribe from the list, please send an email to [email protected] with the word 'unsubscribe' without the quotes in the subject and the body of the message :-~:-~:-~:-~:-~:-~:-~:-~:-~:-~: Please refrain from posting commercial URLs and from discussing prices on the list. Remember to SNIP when replying. :-~:-~:-~:-~:-~:-~:-~:-~:-~:-~: ------------------------------- To unsubscribe from the list, please send an email to [email protected] with the word 'unsubscribe' without the quotes in the subject and the body of the message

Have you tried cut and paste? And you may also be able to use drag and drop... -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of BRCogburn Sent: Monday, January 16, 2012 6:44 PM To: [email protected] Subject: Re: [COMPUTERS] Use of Inserts in Microsoft Word 2003 I am working on creating a narrative account of our family history from a RootsMagic Report into RTF format where I have flexibility to make any changes, additions, etc. I have added some inserts of documents and pictures but now want to move them around - not on the page but in the document itself. I cannot find any way to relocate them or delete them and then replace them where I want them. I have been to many of the Help topics but nothing seems to address this. If anyone is familiar with MS Word, I would appreciate any help you can offer. Barbara Cogburn

Whew!  Someone finally asked a question I might know a little bit about!  I have 2003 and to move a picture anywhere you wish, you highlight the picture by clicking on it, then select 'Format' from your top toolbar.  When the selection box comes up, you may select any of the choices there.  Generally, because once you have formatted the picture in some way, you can drag and drop, I choose "Layout", then "Tight", and the the horizontal alignment of 'center'.  You can choose left or right, but basically, you can still drag and drop the picture in your text and the text will wrap itself around the picture.    Now you have to click on the picture again to show the corner and center side markers, and you just position your cursor in the middle of the picture, and drag and drop.  If you want to be a little fancy, the green button at the top is your tilt button, and you can do just about anything with the picture that way.  If it doesn't work the way you want at first, resize the picture (grab a corner and pull in towardshe opposite corner to make smaller, or pull out to make larger) and drag and drop into the text you want it to be in.  Or just move the picture around until you're satisfied. Myra Herron I am working on creating a narrative account of our family history from a RootsMagic Report into  RTF format where I have flexibility to make any changes,  additions, etc.  I have added some inserts of documents and pictures but now want to move them around - not on the page but in the document itself.  I cannot find any way to relocate them or delete them and then replace them where I want them.  I have been to many of the Help topics but nothing seems to address this.  If anyone is familiar with MS Word, I would appreciate any help you can offer. Barbara Cogburn :-~:-~:-~:-~:-~:-~:-~:-~:-~:-~: Please refrain from posting commercial URLs and from discussing prices on the list. Remember to SNIP when replying. :-~:-~:-~:-~:-~:-~:-~:-~:-~:-~: ------------------------------- To unsubscribe from the list, please send an email to [email protected] with the word 'unsubscribe' without the quotes in the subject and the body of the message

Copy and paste what you want moved, then cut what you pasted elsewhere. Sent from my Kindle Fire _____________________________________________ From: BRCogburn <[email protected]> Sent: Mon Jan 16 18:44:04 PST 2012 To: [email protected] Subject: Re: [COMPUTERS] Use of Inserts in Microsoft Word 2003 I am working on creating a narrative account of our family history from a RootsMagic Report into RTF format where I have flexibility to make any changes, additions, etc. I have added some inserts of documents and pictures but now want to move them around - not on the page but in the document itself. I cannot find any way to relocate them or delete them and then replace them where I want them. I have been to many of the Help topics but nothing seems to address this. If anyone is familiar with MS Word, I would appreciate any help you can offer. Barbara Cogburn :-~:-~:-~:-~:-~:-~:-~:-~:-~:-~: Please refrain from posting commercial URLs and from discussing prices on the list. Remember to SNIP when replying. :-~:-~:-~:-~:-~:-~:-~:-~:-~:-~: _____________________________________________ To unsubscribe from the list, please send an email to [email protected] with the word 'unsubscribe' without the quotes in the subject and the body of the message

I am working on creating a narrative account of our family history from a RootsMagic Report into RTF format where I have flexibility to make any changes, additions, etc. I have added some inserts of documents and pictures but now want to move them around - not on the page but in the document itself. I cannot find any way to relocate them or delete them and then replace them where I want them. I have been to many of the Help topics but nothing seems to address this. If anyone is familiar with MS Word, I would appreciate any help you can offer. Barbara Cogburn

do we need dot.net on our XP machines? & if so, do we need 2.0, 3.5, & 4.0? My daughter & I both have 4 or 5 updates for 2.0 & 3.5 that keep failing, and not knowing what dot.net is used for & if it is necessary, is it possible that we could uninstall it, with out causing a problem with our machine? Shirley Louann Cantwell Roark

Hello David, thanks for your reply. Can you walk me through it by steps. Joe ----- Original Message ----- From: "David C Abernathy" <[email protected]> To: <[email protected]> Sent: Monday, January 16, 2012 5:12 PM Subject: Re: [COMPUTERS] Power Options Joe, You need to define the scheme and then save it. What you are doing is saving the current settings and then changing them. If you want them saved you will need to save them again. Thanks, David C Abernathy Email disclaimers ---------------------------------------------------------------------------- This message represents the official view of the voices in my head. ---------------------------------------------------------------------------- http://www.SchmeckAbernathy.com == All outgoing and incoming mail is scanned by F-Prot Antivirus == -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Joe Snow Sent: Monday, January 16, 2012 9:38 AM To: zwwComputers Subject: [COMPUTERS] Power Options I have a problem with my Power Option Windows XP Home SP3. My preference is never on al three option Monitor-Hard Drive- System. I can change all three to never, save it etc. Later I can go back and they have changed. I created a scheme and named it new. Change all to never and applied. In no time they had changed themselves. What am I doing wrong. We have another XP computer that they all stay on never. Joe :-~:-~:-~:-~:-~:-~:-~:-~:-~:-~: Please refrain from posting commercial URLs and from discussing prices on the list. Remember to SNIP when replying. :-~:-~:-~:-~:-~:-~:-~:-~:-~:-~: ------------------------------- To unsubscribe from the list, please send an email to [email protected] with the word 'unsubscribe' without the quotes in the subject and the body of the message :-~:-~:-~:-~:-~:-~:-~:-~:-~:-~: Please refrain from posting commercial URLs and from discussing prices on the list. Remember to SNIP when replying. :-~:-~:-~:-~:-~:-~:-~:-~:-~:-~: ------------------------------- To unsubscribe from the list, please send an email to [email protected] with the word 'unsubscribe' without the quotes in the subject and the body of the message

There a many programs that require it to be installed. You need to check all of them (your programs) or leave it alone and keep it up to date. Some of the older programs MAY require the older versions. If you are NOT hurting for disk space, again leave it alone and keep them up to date. Those that are failing, I would uninstall, and if needed then they can be reinstalled. Family Tree Maker 2012 requires that you have .Net 4 installed. Thanks, David C Abernathy Email disclaimers ---------------------------------------------------------------------------- This message represents the official view of the voices in my head. ---------------------------------------------------------------------------- http://www.SchmeckAbernathy.com == All outgoing and incoming mail is scanned by F-Prot Antivirus  == -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Louann ROARK Sent: Monday, January 16, 2012 3:26 PM To: COMPUTERS-L Subject: [COMPUTERS] dot.net framework do we need dot.net on our XP machines? & if so, do we need 2.0, 3.5, & 4.0? My daughter & I both have 4 or 5 updates for 2.0 & 3.5 that keep failing, and not knowing what dot.net is used for & if it is necessary, is it possible that we could uninstall it, with out causing a problem with our machine? Shirley Louann Cantwell Roark :-~:-~:-~:-~:-~:-~:-~:-~:-~:-~: Please refrain from posting commercial URLs and from discussing prices on the list. Remember to SNIP when replying. :-~:-~:-~:-~:-~:-~:-~:-~:-~:-~: ------------------------------- To unsubscribe from the list, please send an email to [email protected] with the word 'unsubscribe' without the quotes in the subject and the body of the message

Joe, Go to Start, Control Panel, the Power Options. Set ALL areas to be Never Click Save AS, and type in a scheme name, I use NeverNever, then OK yourself out. Thanks, David C Abernathy Email disclaimers ---------------------------------------------------------------------------- This message represents the official view of the voices in my head. ---------------------------------------------------------------------------- http://www.SchmeckAbernathy.com == All outgoing and incoming mail is scanned by F-Prot Antivirus  == -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Joe Snow Sent: Monday, January 16, 2012 2:24 PM To: [email protected] Subject: Re: [COMPUTERS] Power Options Hello David, thanks for your reply. Can you walk me through it by steps. Joe ----- Original Message ----- From: "David C Abernathy" <[email protected]> To: <[email protected]> Sent: Monday, January 16, 2012 5:12 PM Subject: Re: [COMPUTERS] Power Options Joe, You need to define the scheme and then save it. What you are doing is saving the current settings and then changing them. If you want them saved you will need to save them again. Thanks, David C Abernathy Email disclaimers ---------------------------------------------------------------------------- This message represents the official view of the voices in my head. ---------------------------------------------------------------------------- http://www.SchmeckAbernathy.com == All outgoing and incoming mail is scanned by F-Prot Antivirus == -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Joe Snow Sent: Monday, January 16, 2012 9:38 AM To: zwwComputers Subject: [COMPUTERS] Power Options I have a problem with my Power Option Windows XP Home SP3. My preference is never on al three option Monitor-Hard Drive- System. I can change all three to never, save it etc. Later I can go back and they have changed. I created a scheme and named it new. Change all to never and applied. In no time they had changed themselves. What am I doing wrong. We have another XP computer that they all stay on never. Joe :-~:-~:-~:-~:-~:-~:-~:-~:-~:-~: Please refrain from posting commercial URLs and from discussing prices on the list. Remember to SNIP when replying. :-~:-~:-~:-~:-~:-~:-~:-~:-~:-~: ------------------------------- To unsubscribe from the list, please send an email to [email protected] with the word 'unsubscribe' without the quotes in the subject and the body of the message :-~:-~:-~:-~:-~:-~:-~:-~:-~:-~: Please refrain from posting commercial URLs and from discussing prices on the list. Remember to SNIP when replying. :-~:-~:-~:-~:-~:-~:-~:-~:-~:-~: ------------------------------- To unsubscribe from the list, please send an email to [email protected] with the word 'unsubscribe' without the quotes in the subject and the body of the message :-~:-~:-~:-~:-~:-~:-~:-~:-~:-~: Please refrain from posting commercial URLs and from discussing prices on the list. Remember to SNIP when replying. :-~:-~:-~:-~:-~:-~:-~:-~:-~:-~: ------------------------------- To unsubscribe from the list, please send an email to [email protected] with the word 'unsubscribe' without the quotes in the subject and the body of the message

----- Original Message ----- From: "Louann ROARK" <[email protected]> To: "COMPUTERS-L" <[email protected]> Sent: Monday, January 16, 2012 3:25 PM Subject: [COMPUTERS] dot.net framework > > do we need dot.net on our XP machines? & if so, do we need 2.0, 3.5, & > 4.0? Depends. If you have some program that needs them, then Yes. it's pretty much impossible to know WHAT version is used by what. But if you do need a version and don't have it, the failure MIGHT give enough info to know what's missing, but it's just as likely that it will be a generic error message.

Sometimes when I try to shut down my Computer a message comes up saying someone else is using my Computer and if I shut down they will lose their data. The only other person who uses this Computer is my daughter sometimes when she visits me. Can someone tell me what the cause may be?Does anyone else have this problem? Regards Marie - [email protected] Chinese Proverb: To forget one's Ancestors is to be a brook without a source a tree without a root

Joe, You need to define the scheme and then save it. What you are doing is saving the current settings and then changing them. If you want them saved you will need to save them again. Thanks, David C Abernathy Email disclaimers ---------------------------------------------------------------------------- This message represents the official view of the voices in my head. ---------------------------------------------------------------------------- http://www.SchmeckAbernathy.com == All outgoing and incoming mail is scanned by F-Prot Antivirus  == -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Joe Snow Sent: Monday, January 16, 2012 9:38 AM To: zwwComputers Subject: [COMPUTERS] Power Options I have a problem with my Power Option Windows XP Home SP3. My preference is never on al three option Monitor-Hard Drive- System. I can change all three to never, save it etc. Later I can go back and they have changed. I created a scheme and named it new. Change all to never and applied. In no time they had changed themselves. What am I doing wrong. We have another XP computer that they all stay on never. Joe :-~:-~:-~:-~:-~:-~:-~:-~:-~:-~: Please refrain from posting commercial URLs and from discussing prices on the list. Remember to SNIP when replying. :-~:-~:-~:-~:-~:-~:-~:-~:-~:-~: ------------------------------- To unsubscribe from the list, please send an email to [email protected] with the word 'unsubscribe' without the quotes in the subject and the body of the message