Ingird. I am forwarding you a copy of the email sent to Jon Ingram on Monday 19 Jan 2009 regarding the false alarm that was invoiced Inv 45914. Todate we have received no further communications from Jon. Please read and follow up on this matter. Christine ----- Original Message ----- From: Sean Joseph To: CMH Christine Harmsworth Sent: Monday, March 09, 2009 12:12 PM Subject: Fw: Coffs Harbour Campus Chris, Unfortunately we did not reply to Ingrid as we had the file waiting for Jon to lodge a wavier claim per our detailed email to Jon below. Regards, Sean Sean E Joseph Managing Director Romteck Grid Pty Ltd T 02 9666 1555 F 02 9316 9950 ----- Original Message ----- From: Sean Joseph To: jon.ingram@det.nsw.edu.au Sent: Monday, January 19, 2009 12:52 PM Subject: Coffs Harbour Campus Jon, You asked us to investigate regarding false fire alarm charges imposed by the NSW Fire Brigades in 2008 for fire alarms on following dates: 04/10;19/10;25/10; & 29/10 06/11;15/11; and 21/11 Our Network Manager has checked the monitoring records: - The installed ASE was operating correctly and had been doing so for years. On 02 October 2008 between 1206 hours and 1238 hours someone on site carried out works to the FIP. The ASE reported four power resets and an number of wiring tampers / resistors and fire alarms. Thereafter, as a result of these works, the ASE was affected by whatever works had been done to the FIP. The FIP alarm contacts were being affected by voltage and causing transmission of input isolates and fire alarms to the ASE. When Matthew became aware of the situation he programmed an ASE for normally 'Open' alarm contacts instead of the usual normally 'Closed' contacts. The reason is we have found using normally open helps to overcome FIP problems, especially voltage problems. Kerry of Kelso Fire installed the specially programmed ASE in place of the existing ASE and this has worked with nil fire alarms since. This situation did not arise due to an ASE problem and our involvement was basically to 'insulate' the ASE from the FIP problems. What we submit you should do is send us a simple fax instructing us to lodge False Alarm Wavier applications with the NSWFB on the basis: a.. A problem developed with the site FIP b.. You took action to stop the false alarms by getting Romteck Grid to provide a new ASE and getting Kelso Fire to carry out works including the installation of the new ASE with new alarm relays. c.. The works have been successful and no false fire alarms since. Regards, Sean Sean E Joseph Managing Director Romteck Grid Pty Ltd T 02 9666 1555 F 02 9316 9950 -------------------------------------------------------------------------------- No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.0.237 / Virus Database: 270.11.7/1983 - Release Date: 03/04/09 07:41:00

Hi This came to my websie and I assume it was by mistake. Shirley ----- Original Message ----- From: "christine" <christine@romteckgrid.com.au> To: <ingrid.taylor@det.nsw.edu>; <aus-pt-jackson-convicts@rootsweb.com> Sent: Monday, March 09, 2009 12:23 PM Subject: [PJ] Fw: Coffs Harbour Campus > Ingird. > > I am forwarding you a copy of the email sent to Jon Ingram on Monday 19 > Jan 2009 regarding the false alarm that was invoiced Inv 45914. Todate we > have received no further communications from Jon. Please read and follow > up on this matter. > > Christine > ----- Original Message ----- > From: Sean Joseph > To: CMH Christine Harmsworth > Sent: Monday, March 09, 2009 12:12 PM > Subject: Fw: Coffs Harbour Campus > > > Chris, > > Unfortunately we did not reply to Ingrid as we had the file waiting for > Jon to lodge a wavier claim per our detailed email to Jon below. > > Regards, > > Sean > > Sean E Joseph > Managing Director > Romteck Grid Pty Ltd > T 02 9666 1555 > F 02 9316 9950 > > > > > > > ----- Original Message ----- > From: Sean Joseph > To: jon.ingram@det.nsw.edu.au > Sent: Monday, January 19, 2009 12:52 PM > Subject: Coffs Harbour Campus > > > Jon, > > You asked us to investigate regarding false fire alarm charges imposed by > the NSW Fire Brigades in 2008 for fire alarms on following dates: > > 04/10;19/10;25/10; & 29/10 > 06/11;15/11; and 21/11 > > Our Network Manager has checked the monitoring records: - > > The installed ASE was operating correctly and had been doing so for years. > > On 02 October 2008 between 1206 hours and 1238 hours someone on site > carried out works to the FIP. The ASE reported four power resets and an > number of wiring tampers / resistors and fire alarms. > > Thereafter, as a result of these works, the ASE was affected by whatever > works had been done to the FIP. The FIP alarm contacts were being affected > by voltage and causing transmission of input isolates and fire alarms to > the ASE. > > When Matthew became aware of the situation he programmed an ASE for > normally 'Open' alarm contacts instead of the usual normally 'Closed' > contacts. The reason is we have found using normally open helps to > overcome FIP problems, especially voltage problems. > > Kerry of Kelso Fire installed the specially programmed ASE in place of the > existing ASE and this has worked with nil fire alarms since. > > This situation did not arise due to an ASE problem and our involvement was > basically to 'insulate' the ASE from the FIP problems. > > What we submit you should do is send us a simple fax instructing us to > lodge False Alarm Wavier applications with the NSWFB on the basis: > > a.. A problem developed with the site FIP > b.. You took action to stop the false alarms by getting Romteck Grid to > provide a new ASE and getting Kelso Fire to carry out works including the > installation of the new ASE with new alarm relays. > c.. The works have been successful and no false fire alarms since. > > Regards, > > Sean > > Sean E Joseph > Managing Director > Romteck Grid Pty Ltd > T 02 9666 1555 > F 02 9316 9950 > > > > > -------------------------------------------------------------------------------- > > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 8.0.237 / Virus Database: 270.11.7/1983 - Release Date: 03/04/09 > 07:41:00 > > ------------------------------- > To unsubscribe from the list, please send an email to > AUS-PT-JACKSON-CONVICTS-request@rootsweb.com with the word 'unsubscribe' > without the quotes in the subject and the body of the message -------------------------------------------------------------------------------- No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.0.237 / Virus Database: 270.11.9/1990 - Release Date: 03/08/09 17:17:00

This must be a misdirected email I will ignore it Ron @ Pindimar ----- Original Message ----- From: "christine" <christine@romteckgrid.com.au> To: <ingrid.taylor@det.nsw.edu>; <aus-pt-jackson-convicts@rootsweb.com> Sent: Monday, March 09, 2009 12:23 PM Subject: [PJ] Fw: Coffs Harbour Campus > Ingird. > > I am forwarding you a copy of the email sent to Jon Ingram on Monday 19 > Jan 2009 regarding the false alarm that was invoiced Inv 45914. Todate we > have received no further communications from Jon. Please read and follow > up on this matter. > > Christine > ----- Original Message ----- > From: Sean Joseph > To: CMH Christine Harmsworth > Sent: Monday, March 09, 2009 12:12 PM > Subject: Fw: Coffs Harbour Campus > > > Chris, > > Unfortunately we did not reply to Ingrid as we had the file waiting for > Jon to lodge a wavier claim per our detailed email to Jon below. > > Regards, > > Sean > > Sean E Joseph > Managing Director > Romteck Grid Pty Ltd > T 02 9666 1555 > F 02 9316 9950 > > > > > > > ----- Original Message ----- > From: Sean Joseph > To: jon.ingram@det.nsw.edu.au > Sent: Monday, January 19, 2009 12:52 PM > Subject: Coffs Harbour Campus > > > Jon, > > You asked us to investigate regarding false fire alarm charges imposed by > the NSW Fire Brigades in 2008 for fire alarms on following dates: > > 04/10;19/10;25/10; & 29/10 > 06/11;15/11; and 21/11 > > Our Network Manager has checked the monitoring records: - > > The installed ASE was operating correctly and had been doing so for years. > > On 02 October 2008 between 1206 hours and 1238 hours someone on site > carried out works to the FIP. The ASE reported four power resets and an > number of wiring tampers / resistors and fire alarms. > > Thereafter, as a result of these works, the ASE was affected by whatever > works had been done to the FIP. The FIP alarm contacts were being affected > by voltage and causing transmission of input isolates and fire alarms to > the ASE. > > When Matthew became aware of the situation he programmed an ASE for > normally 'Open' alarm contacts instead of the usual normally 'Closed' > contacts. The reason is we have found using normally open helps to > overcome FIP problems, especially voltage problems. > > Kerry of Kelso Fire installed the specially programmed ASE in place of the > existing ASE and this has worked with nil fire alarms since. > > This situation did not arise due to an ASE problem and our involvement was > basically to 'insulate' the ASE from the FIP problems. > > What we submit you should do is send us a simple fax instructing us to > lodge False Alarm Wavier applications with the NSWFB on the basis: > > a.. A problem developed with the site FIP > b.. You took action to stop the false alarms by getting Romteck Grid to > provide a new ASE and getting Kelso Fire to carry out works including the > installation of the new ASE with new alarm relays. > c.. The works have been successful and no false fire alarms since. > > Regards, > > Sean > > Sean E Joseph > Managing Director > Romteck Grid Pty Ltd > T 02 9666 1555 > F 02 9316 9950 > > > > > -------------------------------------------------------------------------------- > > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 8.0.237 / Virus Database: 270.11.7/1983 - Release Date: 03/04/09 > 07:41:00 > > ------------------------------- > To unsubscribe from the list, please send an email to > AUS-PT-JACKSON-CONVICTS-request@rootsweb.com with the word 'unsubscribe' > without the quotes in the subject and the body of the message >