My mother's cousin, Leroy Acklin, died this last weekend. His parents were Clarence Acklin & Bertie Berry. He leaves behind his wife, dau. & two gchildren. I believe there are some Berry folks on this site. gen

Morn-in Betty Before you do the below save your document as is as so if something happen bad you will at least have your work as is Open up your document that you are working on Then at the top of the window click on the tab that says page layout When the next window opens up high light/select the complete document by holding down CTRL on key boardand at same time hold down the key that says end on your key board this will take your curser to end of the document where you have made the last entry. With the curser blinking at the end of your document again hold down your left mouse button and highlight/select your complete document. Then look up to the top and see where it says spacing. All the numbers should be reading Zero if not Click on the arrows to make them zero Then right click anywhere on the document to deselect it and you should be at single space I hope this is more than clear as mud Hope this works for ya I know just enough about this to get both of us in trouble Jim. I have taken all our worldly goods and got Judy over here in IRELAND chasing our family tree for our 50 th wedding anniversary but I will check back now and then in hopes this works for you ----- Original Message ----- From: "Betty McCollum" <Betmac@centurytel.net> To: arizard@rootsweb.com Sent: Monday, September 13, 2010 9:10:56 PM Subject: Re: [ARIZARD] Question Carold: It was on single spacing; but thanks for trying to help. Nothing I have done has helped so far, but I appreciate everyone's efforts. Betty Mc ----- Original Message ----- From: "Carold Hodges" <segdohcl@yahoo.com> To: "Betty McCollum" <Betmac@centurytel.net>; <arizard@rootsweb.com> Sent: Monday, September 13, 2010 7:49 PM Subject: Re: [ARIZARD] Question > Betty, i'm sure you have probably tried this, but on the Format menu click > paragraph, click the spacing tab, in the line spacing box select the > spacing you > want. > > Carold > > > > > > ________________________________ > From: Betty McCollum <Betmac@centurytel.net> > To: arizard@rootsweb.com > Sent: Mon, September 13, 2010 6:07:27 PM > Subject: [ARIZARD] Question > > I have a question, and I've been holding off asking this because I thought > I > could figure it out myself; but haven't been able to. I am typing some > family > information into Microsoft Works. It was going well, then suddenly it > starts > double spacing, which I don't want. I can't figure out how to get it to > go back > to single spacing. I've tried a few things, but it is still double > spacing. I > hate to be outdone by a machine, but looks like I am. Can someone help > me? > Thanks. > Betty Mc > > ------------------------------- > To unsubscribe from the list, please send an email to > ARIZARD-request@rootsweb.com with the word 'unsubscribe' without the > quotes in > the subject and the body of the message > > > > > > ------------------------------- > To unsubscribe from the list, please send an email to > ARIZARD-request@rootsweb.com with the word 'unsubscribe' without the > quotes in the subject and the body of the message > ------------------------------- To unsubscribe from the list, please send an email to ARIZARD-request@rootsweb.com with the word 'unsubscribe' without the quotes in the subject and the body of the message

Betty.....select the part you want to single space.   Click on Home.....then click on the line spacing icon.    click on "remove space after paragraph".....that should do it!  Took me a while to figure that out also!...........smiles..............Evalyn --- On Tue, 9/14/10, Jim and Judy MONTGOMERY <pabst04@comcast.net> wrote: From: Jim and Judy MONTGOMERY <pabst04@comcast.net> Subject: [ARIZARD] Fwd: Question To: arizard@rootsweb.com Date: Tuesday, September 14, 2010, 12:00 AM Morn-in Betty Before you do the below save your document as is as so if something happen bad you will at least have your work as is Open up your document that you are working on Then at the top of the window click on the tab that says page layout When the next window opens up high light/select the complete document by holding down CTRL on key boardand at same time hold down the key that says end on your key board this will take your curser to end of the document where you have made the last entry. With the curser blinking at the end of your document again hold down your left mouse button and highlight/select your complete document. Then look up to the top and see where it says spacing. All the numbers should be reading Zero if not Click on the arrows to make them zero Then right click anywhere on the document to deselect it and you should be at single space I hope this is more than clear as mud Hope this works for ya I know just enough about this to get both of us in trouble Jim. I have taken all our worldly goods and got Judy over here in IRELAND chasing our family tree for our 50 th wedding anniversary but I will check back now and then in hopes this works for you ----- Original Message ----- From: "Betty McCollum" <Betmac@centurytel.net> To: arizard@rootsweb.com Sent: Monday, September 13, 2010 9:10:56 PM Subject: Re: [ARIZARD] Question Carold: It was on single spacing; but thanks for trying to help. Nothing I have done has helped so far, but I appreciate everyone's efforts. Betty Mc ----- Original Message ----- From: "Carold Hodges" <segdohcl@yahoo.com> To: "Betty McCollum" <Betmac@centurytel.net>; <arizard@rootsweb.com> Sent: Monday, September 13, 2010 7:49 PM Subject: Re: [ARIZARD] Question > Betty, i'm sure you have probably tried this, but on the Format menu click > paragraph, click the spacing tab, in the line spacing box select the > spacing you > want. > > Carold > > > > > > ________________________________ > From: Betty McCollum <Betmac@centurytel.net> > To: arizard@rootsweb.com > Sent: Mon, September 13, 2010 6:07:27 PM > Subject: [ARIZARD] Question > > I have a question, and I've been holding off asking this because I thought > I > could figure it out myself; but haven't been able to. I am typing some > family > information into Microsoft Works. It was going well, then suddenly it > starts > double spacing, which I don't want. I can't figure out how to get it to > go back > to single spacing. I've tried a few things, but it is still double > spacing. I > hate to be outdone by a machine, but looks like I am. Can someone help > me? > Thanks. > Betty Mc > > ------------------------------- > To unsubscribe from the list, please send an email to > ARIZARD-request@rootsweb.com with the word 'unsubscribe' without the > quotes in > the subject and the body of the message > > > > > > ------------------------------- > To unsubscribe from the list, please send an email to > ARIZARD-request@rootsweb.com with the word 'unsubscribe' without the > quotes in the subject and the body of the message > ------------------------------- To unsubscribe from the list, please send an email to ARIZARD-request@rootsweb.com with the word 'unsubscribe' without the quotes in the subject and the body of the message ------------------------------- To unsubscribe from the list, please send an email to ARIZARD-request@rootsweb.com with the word 'unsubscribe' without the quotes in the subject and the body of the message

Carold: It was on single spacing; but thanks for trying to help. Nothing I have done has helped so far, but I appreciate everyone's efforts. Betty Mc ----- Original Message ----- From: "Carold Hodges" <segdohcl@yahoo.com> To: "Betty McCollum" <Betmac@centurytel.net>; <arizard@rootsweb.com> Sent: Monday, September 13, 2010 7:49 PM Subject: Re: [ARIZARD] Question > Betty, i'm sure you have probably tried this, but on the Format menu click > paragraph, click the spacing tab, in the line spacing box select the > spacing you > want. > > Carold > > > > > > ________________________________ > From: Betty McCollum <Betmac@centurytel.net> > To: arizard@rootsweb.com > Sent: Mon, September 13, 2010 6:07:27 PM > Subject: [ARIZARD] Question > > I have a question, and I've been holding off asking this because I thought > I > could figure it out myself; but haven't been able to. I am typing some > family > information into Microsoft Works. It was going well, then suddenly it > starts > double spacing, which I don't want. I can't figure out how to get it to > go back > to single spacing. I've tried a few things, but it is still double > spacing. I > hate to be outdone by a machine, but looks like I am. Can someone help > me? > Thanks. > Betty Mc > > ------------------------------- > To unsubscribe from the list, please send an email to > ARIZARD-request@rootsweb.com with the word 'unsubscribe' without the > quotes in > the subject and the body of the message > > > > > > ------------------------------- > To unsubscribe from the list, please send an email to > ARIZARD-request@rootsweb.com with the word 'unsubscribe' without the > quotes in the subject and the body of the message >

Betty, Press "Ctrl" button and 1. That should get it back to single space. Fern Quoting Betty McCollum <Betmac@centurytel.net>: > I have a question, and I've been holding off asking this because I thought I > could figure it out myself; but haven't been able to. I am typing > some family > information into Microsoft Works. It was going well, then suddenly it starts > double spacing, which I don't want. I can't figure out how to get it > to go back > to single spacing. I've tried a few things, but it is still double > spacing. I > hate to be outdone by a machine, but looks like I am. Can someone > help me? Thanks. > Betty Mc > > ------------------------------- > To unsubscribe from the list, please send an email to > ARIZARD-request@rootsweb.com with the word 'unsubscribe' without the > quotes in > the subject and the body of the message >

Janice & Fern: I tried both suggestions; couldn't find "remove space after paragraph", and when I tried the "Control and 1" it didn't work. I might add that if I am typing a sentence, it automatically goes to the next line and doesn't do the double spacing between lines; but when I am typing a census record and hit "enter", then it does the automatic double space between lines. Betty Mc ----- Original Message ----- From: "Janice Reed" <jreed47@centurytel.net> To: "Betty McCollum" <Betmac@centurytel.net>; <arizard@rootsweb.com> Sent: Monday, September 13, 2010 6:27 PM Subject: Re: [ARIZARD] Question > Are you talking about spacing between the lines or words? If it is lines > you have two options. Change you line spacing on the ribbon or or click > on > the end of your line and go to remove space after paragraph. (at the very > end of your line spacing tool) > Just learning this program this year in school. When I bought my new > computer it came with Windows 7 installed. I don't like it as well as I > did > Windows 2000XP. > Love 'ya > Jan > > -------------------------------------------------- > From: "Betty McCollum" <Betmac@centurytel.net> > Sent: Monday, September 13, 2010 6:07 PM > To: <arizard@rootsweb.com> > Subject: [ARIZARD] Question > >> I have a question, and I've been holding off asking this because I >> thought >> I could figure it out myself; but haven't been able to. I am typing some >> family information into Microsoft Works. It was going well, then >> suddenly >> it starts double spacing, which I don't want. I can't figure out how to >> get it to go back to single spacing. I've tried a few things, but it is >> still double spacing. I hate to be outdone by a machine, but looks like >> I >> am. Can someone help me? Thanks. >> Betty Mc >> >> ------------------------------- >> To unsubscribe from the list, please send an email to >> ARIZARD-request@rootsweb.com with the word 'unsubscribe' without the >> quotes in the subject and the body of the message >> >> > > > ------------------------------- > To unsubscribe from the list, please send an email to > ARIZARD-request@rootsweb.com with the word 'unsubscribe' without the > quotes in the subject and the body of the message >

Janice: I'm talking about spaces between the lines. This computer does too much automatically that I don't like as well; rather do it myself (at least some things). I'll try what you said. Many thanks. Betty Mc ----- Original Message ----- From: "Janice Reed" <jreed47@centurytel.net> To: "Betty McCollum" <Betmac@centurytel.net>; <arizard@rootsweb.com> Sent: Monday, September 13, 2010 6:27 PM Subject: Re: [ARIZARD] Question > Are you talking about spacing between the lines or words? If it is lines > you have two options. Change you line spacing on the ribbon or or click > on > the end of your line and go to remove space after paragraph. (at the very > end of your line spacing tool) > Just learning this program this year in school. When I bought my new > computer it came with Windows 7 installed. I don't like it as well as I > did > Windows 2000XP. > Love 'ya > Jan > > -------------------------------------------------- > From: "Betty McCollum" <Betmac@centurytel.net> > Sent: Monday, September 13, 2010 6:07 PM > To: <arizard@rootsweb.com> > Subject: [ARIZARD] Question > >> I have a question, and I've been holding off asking this because I >> thought >> I could figure it out myself; but haven't been able to. I am typing some >> family information into Microsoft Works. It was going well, then >> suddenly >> it starts double spacing, which I don't want. I can't figure out how to >> get it to go back to single spacing. I've tried a few things, but it is >> still double spacing. I hate to be outdone by a machine, but looks like >> I >> am. Can someone help me? Thanks. >> Betty Mc >> >> ------------------------------- >> To unsubscribe from the list, please send an email to >> ARIZARD-request@rootsweb.com with the word 'unsubscribe' without the >> quotes in the subject and the body of the message >> >> > > > ------------------------------- > To unsubscribe from the list, please send an email to > ARIZARD-request@rootsweb.com with the word 'unsubscribe' without the > quotes in the subject and the body of the message >

Are you talking about spacing between the lines or words? If it is lines you have two options. Change you line spacing on the ribbon or or click on the end of your line and go to remove space after paragraph. (at the very end of your line spacing tool) Just learning this program this year in school. When I bought my new computer it came with Windows 7 installed. I don't like it as well as I did Windows 2000XP. Love 'ya Jan -------------------------------------------------- From: "Betty McCollum" <Betmac@centurytel.net> Sent: Monday, September 13, 2010 6:07 PM To: <arizard@rootsweb.com> Subject: [ARIZARD] Question > I have a question, and I've been holding off asking this because I thought > I could figure it out myself; but haven't been able to. I am typing some > family information into Microsoft Works. It was going well, then suddenly > it starts double spacing, which I don't want. I can't figure out how to > get it to go back to single spacing. I've tried a few things, but it is > still double spacing. I hate to be outdone by a machine, but looks like I > am. Can someone help me? Thanks. > Betty Mc > > ------------------------------- > To unsubscribe from the list, please send an email to > ARIZARD-request@rootsweb.com with the word 'unsubscribe' without the > quotes in the subject and the body of the message > >

I have a question, and I've been holding off asking this because I thought I could figure it out myself; but haven't been able to. I am typing some family information into Microsoft Works. It was going well, then suddenly it starts double spacing, which I don't want. I can't figure out how to get it to go back to single spacing. I've tried a few things, but it is still double spacing. I hate to be outdone by a machine, but looks like I am. Can someone help me? Thanks. Betty Mc

Betty, i'm sure you have probably tried this, but on the Format menu click paragraph, click the spacing tab, in the line spacing box select the spacing you want. Carold ________________________________ From: Betty McCollum <Betmac@centurytel.net> To: arizard@rootsweb.com Sent: Mon, September 13, 2010 6:07:27 PM Subject: [ARIZARD] Question I have a question, and I've been holding off asking this because I thought I could figure it out myself; but haven't been able to. I am typing some family information into Microsoft Works. It was going well, then suddenly it starts double spacing, which I don't want. I can't figure out how to get it to go back to single spacing. I've tried a few things, but it is still double spacing. I hate to be outdone by a machine, but looks like I am. Can someone help me? Thanks. Betty Mc ------------------------------- To unsubscribe from the list, please send an email to ARIZARD-request@rootsweb.com with the word 'unsubscribe' without the quotes in the subject and the body of the message

Thanks Harold! I'll have to file this under the help file, I'll never remember. ----- Original Message ----- From: "Harold Blevins" <hrblevins@comcast.net> To: <arizard@rootsweb.com> Sent: Monday, September 13, 2010 11:13 AM Subject: Re: [ARIZARD] returned messages-Vera > Vera, I have the same trouble sometimes when I paste things in a message > using Rich Text Format (.rtf ). My FTM will print out reports in .rtf, > and > I > use it a lot because the message looks so much nicer. If you use Outlook > Express > as your mail program, go up to the Toolbar and click on "Format", you will > see > a choice between "Rich Text" and "Plain Text", for ARIZARD you have to > select > Plain Text. It will not take "colors" in your message, except for > hypertext > (blue) > in a wesbite or e-mail address....HRB > > > > From: "Vera Reeves" <velane@centurytel.net> > To: <arizard@rootsweb.com> > Sent: Monday, September 13, 2010 7:48 AM > Subject: [ARIZARD] returned messages > > >> I've tried to send messages to the list and I keep getting them back with >> this message. >> AS far as I know I've changed nothing on my computer. Did leave it off >> for >> a >> couple of days, is it mad at me? >>>>>>>>>>>>>>>>>>>> >>> The message's file extension was not explicitly allowed if you are using >>> a >>> rich text editor(colors, different fonts ect...) you must turn it off >>> >>> >> >> >> ------------------------------- >> To unsubscribe from the list, please send an email to >> ARIZARD-request@rootsweb.com with the word 'unsubscribe' without the >> quotes in the subject and the body of the message >> > > > ------------------------------- > To unsubscribe from the list, please send an email to > ARIZARD-request@rootsweb.com with the word 'unsubscribe' without the > quotes in the subject and the body of the message >

Vera, I have the same trouble sometimes when I paste things in a message using Rich Text Format (.rtf ). My FTM will print out reports in .rtf, and I use it a lot because the message looks so much nicer. If you use Outlook Express as your mail program, go up to the Toolbar and click on "Format", you will see a choice between "Rich Text" and "Plain Text", for ARIZARD you have to select Plain Text. It will not take "colors" in your message, except for hypertext (blue) in a wesbite or e-mail address....HRB From: "Vera Reeves" <velane@centurytel.net> To: <arizard@rootsweb.com> Sent: Monday, September 13, 2010 7:48 AM Subject: [ARIZARD] returned messages > I've tried to send messages to the list and I keep getting them back with > this message. > AS far as I know I've changed nothing on my computer. Did leave it off for > a > couple of days, is it mad at me? >>>>>>>>>>>>>>>>>>> >> The message's file extension was not explicitly allowed if you are using >> a >> rich text editor(colors, different fonts ect...) you must turn it off >> >> > > > ------------------------------- > To unsubscribe from the list, please send an email to > ARIZARD-request@rootsweb.com with the word 'unsubscribe' without the > quotes in the subject and the body of the message >

I'm sorry if you receive this more than once. Checking all Drowns in Arkansas on Find A Grave and found this one not buried in Izard County. There's also a photo of the military gravestone on the Pinecrest Cemetery site of Find A Grave. Birth: Mar. 13, 1927 Death: Aug. 3, 2004 Roller Ballard Funeral Home online obituary: Harold L. Drown, 77, of Benton died Tuesday, August 3, 2004, at St. Vincent's Health System in Little Rock. He was born March 13, 1927, in Calico Rock, Arkansas, to the late Stephen Robert and Maude Copeland Drown. Mr. Drown was a research chemist for Reynolds Aluminum. His wife, Shirley Drown preceded him in death. Survivors include one daughter, Laura Carlisle and husband Dr. Robert Carlisle of Benton; one son, Steven L. Drown and wife Gayla of Benton; one sister, Bernice Wright of Mt. Home, AR, and three grandchildren, Shane Purvis and Rachel and Rebecca Carlisle. A graveside service will be held 2:00 p.m. Thursday, August 5, 2004, at Pinecrest Memorial Park in Alexander with Dr. George McCoy and Rev. Susan Ledbetter officiating. Arrangements are by Roller-Ballard Funeral Home (315-4047). In lieu of flowers, memorials may be sent to Saline County Humane Society and/or organizations of your choice. Spouse: Shirley A. Drown (1932 - 1998)* Burial: Pinecrest Memorial Park and Garden Mausoleum Alexander Saline County Arkansas, USA Plot: Veteran's Field of Honor

This might intrest some of Mable's family and friends. She was raised on twin creek. June Mabel Juanita Cooper June 11, 1925 - September 10, 2010 Mabel Juanita Cooper, 85, of Little Rock, went to be with the Lord Friday, September 10, 2010. She was the daughter of the late Owen and Vietta Gulley Thompson. Mabel was a member of Central Church of Christ and her hobbies included fishing, camping, reading, and playing cards with her friends. Beside her parents she was preceded in death by her husband, Lloyd. She is survived by her daughters, Laverne Watts (Phil), Carolyn Barger (Rick), and Kathy McAdams (Eddie); grandchildren, Jennifer and Emily Watts, Sarah and Matt Matthews, Matthew and Michael Barger, Alan McAdams and Megan and Brandon Bennett; great-grandchildren, Cooper and Carson Matthews and Olivia Watts; and two sisters, Maudie Gillihan and Fay Stapleton. Funeral services will be 2:00 p.m., Monday, September 13, 2010 at Roller-Chenal Funeral Home Chapel with Leon Barnes officiating. Interment will be in Pinecrest Memorial Park. Visitation will be 5:00-7:00 p.m., Sunday, September 12, 2010 at the funeral home (501) 224-8300. Memorials may be made to Special Care, 12201 N. Western Ave., Oklahoma City, Oklahoma 73114.

Thanks Janice. The only one I seem to be having trouble with is arizard list. ----- Original Message ----- From: "Janice Reed" <jreed47@centurytel.net> To: <arizard@rootsweb.com> Sent: Monday, September 13, 2010 8:40 AM Subject: Re: [ARIZARD] messages returning > Hi Vera, > I called Centurytel yesterday because I was having trouble getting my > email. > Some lady there told me that anyone with a centurytel address was > experiencing difficulties. They are switching over to centurylink and > things are kind of crazy. > The processor on my old computer went out so bought a new one and I have > been trying to get used to Windows 7. Thank goodness that is one of my > classes at college this year or I would have been totally in the dark. > Janice Reed > > -------------------------------------------------- > From: "Vera Reeves" <velane@centurytel.net> > Sent: Monday, September 13, 2010 8:36 AM > To: <arizard@rootsweb.com> > Subject: [ARIZARD] messages returning > >> Anyone have trouble with messages besides me.? >> >> Some aren't showing up and others are returned. >> >> ------------------------------- >> To unsubscribe from the list, please send an email to >> ARIZARD-request@rootsweb.com with the word 'unsubscribe' without the >> quotes in the subject and the body of the message >> >> > > > ------------------------------- > To unsubscribe from the list, please send an email to > ARIZARD-request@rootsweb.com with the word 'unsubscribe' without the > quotes in the subject and the body of the message >

Hi Vera, I called Centurytel yesterday because I was having trouble getting my email. Some lady there told me that anyone with a centurytel address was experiencing difficulties. They are switching over to centurylink and things are kind of crazy. The processor on my old computer went out so bought a new one and I have been trying to get used to Windows 7. Thank goodness that is one of my classes at college this year or I would have been totally in the dark. Janice Reed -------------------------------------------------- From: "Vera Reeves" <velane@centurytel.net> Sent: Monday, September 13, 2010 8:36 AM To: <arizard@rootsweb.com> Subject: [ARIZARD] messages returning > Anyone have trouble with messages besides me.? > > Some aren't showing up and others are returned. > > ------------------------------- > To unsubscribe from the list, please send an email to > ARIZARD-request@rootsweb.com with the word 'unsubscribe' without the > quotes in the subject and the body of the message > >

Anyone have trouble with messages besides me.? Some aren't showing up and others are returned.

I've tried to send messages to the list and I keep getting them back with this message. AS far as I know I've changed nothing on my computer. Did leave it off for a couple of days, is it mad at me? >>>>>>>>>>>>>>>>>> > The message's file extension was not explicitly allowed if you are using a > rich text editor(colors, different fonts ect...) you must turn it off > >

That's all I know as This picture was taken between 1908-1910 and she is in the picture, I never really looked into it as I thought the tombstone was right. I got off of researching the Lawrence family and went back to researching my dads Burgess family so I never checked into it. marilyn -------------------------------------------------- From: "Don Ott" <dott@centurytel.net> Sent: Saturday, September 11, 2010 4:35 PM To: <arizard@rootsweb.com> Subject: Re: [ARIZARD] Sarah Elizabeth Baker b. 21 Jul 1832 > Thanks Marilyn, > Can you help me with a death date for her. The tombstone > must be wrong, she is living with her son James for the Census in > 1910. That was taken on 27 April 1910. I do not find her for 1920 so > she may have died between 1910 and 1920. The 24 May 1908 as on her > stone is used widely almost by everyone, guess they thought if it was > on her tombstone it must be right. Any help appreciated. > Don > > > At 04:23 PM 9/11/2010, you wrote: >>this is my gr-gr-grandmother. marilyn smith >> >>-------------------------------------------------- >>From: "Don Ott" <dott@centurytel.net> >>Sent: Friday, September 10, 2010 11:56 AM >>To: <ARStone@rootsweb.com>; <ARIzard@rootsweb.com> >>Subject: [ARIZARD] Sarah Elizabeth Baker b. 21 Jul 1832 >> >> > On the headstone for Sarah Elizabeth Baker in the Onia Cem. Stone, >> > AR, her death is indicated as 24 May 1908. That seems to be a wide >> > held date for her death. Sarah was the daughter of Littleton Baker >> > and Martha Morgan. >> > The 1910 Census Arkansas, Stone, Farris, lists Sarah E. Lawrence 77, >> > mother, living with son James Littleton Lawrence and his wife Rachel >> > Emaline Huffines. Seems like the headstone for Sarah may have the >> > wrong date on it. Anyone know the story on this? >> > Don >> > >> > >> > ------------------------------- >> > To unsubscribe from the list, please send an email to >> > ARIZARD-request@rootsweb.com with the word 'unsubscribe' without the >> > quotes in the subject and the body of the message >> > >> >>------------------------------- >>To unsubscribe from the list, please send an email to >>ARIZARD-request@rootsweb.com with the word 'unsubscribe' without the >>quotes in the subject and the body of the message >> >> >>No virus found in this incoming message. >>Checked by AVG - www.avg.com >>Version: 9.0.851 / Virus Database: 271.1.1/3128 - Release Date: >>09/11/10 01:34:00 > > > ------------------------------- > To unsubscribe from the list, please send an email to > ARIZARD-request@rootsweb.com with the word 'unsubscribe' without the > quotes in the subject and the body of the message >

Thanks Don. I always like to help if i can. June ----- Original Message ----- From: "Don Ott" <dott@centurytel.net> To: <arizard@rootsweb.com> Sent: Sunday, September 12, 2010 12:07 PM Subject: Re: [ARIZARD] James Larkin Smith and Cassandra Newman > Thanks June > You may be able to help Mary Stinnett (Evans), I don't think > I have data on those folks. > Don > > > At 06:21 PM 9/11/2010, you wrote: > >Don Anna "Annie" Maria Smith married Clarence payne first and he died and > >she was second wife of my grandpa Charles Monroe Grimmett. i have all her > >brother and sisters. parents were Whitfield Bergman Smith and Mariah Sarah > >Croom. > >I have a picture of step-grandma Annie and her dad Whitfield. > >i have a chart on these families from back in 2000 posted on ARizard list. > >June > > > > > > > > > > > >----- Original Message ----- > >From: "Don Ott" <dott@centurytel.net> > >To: <arizard@rootsweb.com> > >Sent: Saturday, September 11, 2010 4:59 PM > >Subject: Re: [ARIZARD] James Larkin Smith and Cassandra Newman > > > > > > > I show that Whitfield Bergman Smith and Mariah Sarah Croom had the > > > following children. > > > Mary Louise > > > Martha Leona > > > William Rufus > > > Josephus Silvanous > > > Susan Elizabeth > > > Nanny Jane > > > Leander Whitfield > > > Wiley Franklin > > > Millard Filmore > > > Anna Maria "Annie" > > > Nathan Benjamin > > > ALL SMITH's > > > > > > > > > At 04:49 PM 9/11/2010, you wrote: > > > >Is this William Rufus Smith's sister? If so William Rufus is my husbands > > > >grandfather. > > > >marilyn > > > > > > > >-------------------------------------------------- > > > >From: <gc-gateway@rootsweb.com> > > > >Sent: Friday, September 10, 2010 9:15 PM > > > >To: <ARIZARD-L@rootsweb.com> > > > >Subject: Re: [ARIZARD] James Larkin Smith and Cassandra Newman > > > > > > > > > This is a Message Board Post that is gatewayed to this mailing list. > > > > > > > > > > Author: ourhouse1906 > > > > > Surnames: > > > > > Classification: queries > > > > > > > > > > Message Board URL: > > > > > > > > > > > > > > > >http://boards.rootsweb.com/localities.northam.usa.states.arkansas.counties. izard/1465.1/mb.ashx > > > > > > > > > > Message Board Post: > > > > > > > > > > I am the granddaughter of Mattie Ann Smith Stinnett. Mattie is a > >sister to > > > > > Rufus Smith. I am researching also, looking for any information. I > >think > > > > > that Frank M Smith is James Larkin Smith's father, But like so many > >thing, > > > > > I continue to search records for direction. I met Rufus when I was a > > > > > little girl. Mary Stinnett (Evans) > > > > > > > > > > Important Note: > > > > > The author of this message may not be subscribed to this list. If you > > > > > would like to reply to them, please click on the Message Board URL > >link > > > > > above and respond on the board. > > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------- > > > > > To unsubscribe from the list, please send an email to > > > > > ARIZARD-request@rootsweb.com with the word 'unsubscribe' without the > > > > > quotes in the subject and the body of the message > > > > > > > > > > > > >------------------------------- > > > >To unsubscribe from the list, please send an email to > > > >ARIZARD-request@rootsweb.com with the word 'unsubscribe' without the > > > >quotes in the subject and the body of the message > > > > > > > > > > > >No virus found in this incoming message. > > > >Checked by AVG - www.avg.com > > > >Version: 9.0.851 / Virus Database: 271.1.1/3128 - Release Date: > > > >09/11/10 01:34:00 > > > > > > > > > ------------------------------- > > > To unsubscribe from the list, please send an email to > >ARIZARD-request@rootsweb.com with the word 'unsubscribe' without the quotes > >in the subject and the body of the message > > > > > > > > > >------------------------------- > >To unsubscribe from the list, please send an email to > >ARIZARD-request@rootsweb.com with the word 'unsubscribe' without the > >quotes in the subject and the body of the message > > > > > >No virus found in this incoming message. > >Checked by AVG - www.avg.com > >Version: 9.0.851 / Virus Database: 271.1.1/3130 - Release Date: > >09/12/10 01:34:00 > > > ------------------------------- > To unsubscribe from the list, please send an email to ARIZARD-request@rootsweb.com with the word 'unsubscribe' without the quotes in the subject and the body of the message > >